/****************************************************************************
 *
 * Copyright 2020 Samsung Electronics All Rights Reserved.
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
 * either express or implied. See the License for the specific
 * language governing permissions and limitations under the License.
 *
 ****************************************************************************/

#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"
//#include "gpio.h"
#include "s5js100_pinconfig.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

#define PORT_SHIFT  5

typedef enum {
    P00 = 0,
    P01,
    P02,
    P03,
    P04,
    P05,
    P06,
    P07,
    P08,
    P09,
    P10,
    P11,
    P12,
    P13,
    P14,
    P15,
    P16,
    P17,
    P18,
    P19,
    P20,
    P21,
    P22,
    P23,
    P24,
    P25,
    P26,
    P27,
    P28,
    P29,
    P30,
    P31,
    P32,
    P33,
    P34,
    P35,
    P36,
    P37,
    P38,
    P39,
    P40,
    P41,
    P42,
    P43,
    P44,
    P45,
    P46,
    P47,
    P48,
    P49,
    P50,
    P51,
    P52,
    P53,
    P54,
    P55,
    P56,
    P57,
    P58,
    P59,
    P60,
    P61,
    P62,
    P63,
    P64,
    P65,
    P66,
    P67,
    P68,
    P69,
    P70,
    P71,
    P72,

    /* Actually Dummy */
    UART_RX4,
    UART_TX4,
    UART_RX5,
    UART_TX5,

    P05_GPIO = GPIO_GPIO5,
    P06_GPIO = GPIO_GPIO6,

    //Uart
    UART_RX0 = GPIO_USI0_RXD_CLK_SCL,
    UART_TX0 = GPIO_USI0_TXD_MOSI_SDA,
    UART_RX1 = GPIO_USI1_RXD_CLK_SCL,
    UART_TX1 = GPIO_USI1_TXD_MOSI_SDA,
    UART_RX2 = GPIO_UART0_RXD,
    UART_TX2 = GPIO_UART0_TXD,
    UART_RX3 = GPIO_UART1_RXD,
    UART_TX3 = GPIO_UART1_TXD,


    UART0_RTS = GPIO_USI0_RTSN_MISO_NA,
    UART0_CTS = GPIO_USI0_CTSN_CSN_NA,
    UART1_RTS = GPIO_USI1_RTSN_MISO_NA,
    UART1_CTS = GPIO_USI1_CTSN_CSN_NA,
    UART2_CTS = GPIO_UART0_CTSB,
    UART2_RTS = GPIO_UART0_RTSB,
    UART3_CTS = GPIO_UART1_CTSB,
    UART3_RTS = GPIO_UART1_RTSB,

    LED1 = P00,
    LED2 = P01,
    LED3 = P02,
    LED4 = P03,

    /* I2C Pin Names */
    I2C_SDA = (36 << 16 | 2 << 8),
    I2C_SCL = (35 << 16 | 2 << 8),

    /* SPI Pin Names */
    SPI0_CLK = ((0 << 0) | (0x0 << 11) | (0x2 << 8) | (33 << 16)),
    SPI0_CSN = ((0 << 0) | (0x0 << 11) | (0x2 << 8) | (34 << 16)),
    SPI0_MISO = ((0 << 0) | (0x0 << 11) | (0x2 << 8) | (31 << 16)),
    SPI0_MOSI = ((0 << 0) | (0x0 << 11) | (0x2 << 8) | (32 << 16)),

    SPI1_CLK = ((0x1 << 0) | (0x0 << 11) | (0x0 << 8) | (12 << 16)),
    SPI1_CSN = ((0x1 << 0) | (0x0 << 11) | (0x0 << 8) | (15 << 16)),
    SPI1_MISO = ((0x1 << 0) | (0x0 << 11) | (0x0 << 8) | (14 << 16)),
    SPI1_MOSI = ((0x1 << 0) | (0x0 << 11) | (0x0 << 8) | (13 << 16)),

    // Not connected
    NC = (int)0xFFFFFFFF,
} PinName;

typedef enum {
    PullUp = 2,
    PullDown = 1,
    PullNone = 0,
    Repeater = 3,
    OpenDrain = 4,
    PullDefault = PullDown
} PinMode;

#ifdef __cplusplus
}
#endif

#endif