/**
 *******************************************************************************
 * @file    system_TMPM46B.c
 * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer Source File for the
 *          TOSHIBA 'TMPM46B' Device Series
 * @version V2.0.2.4
 * @date    2018/3/15
 *
 * DO NOT USE THIS SOFTWARE WITHOUT THE SOFTWARE LICENSE AGREEMENT.
 *
 * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2018 All rights reserved
 *******************************************************************************
 */

#include "TMPM46B.h"

/*-------- <<< Start of configuration section >>> ----------------------------*/

/* Watchdog Timer (WD) Configuration */
#define WD_SETUP                (1U)
#define WDMOD_Val               (0x00000000UL)
#define WDCR_Val                (0x000000B1UL)

/* Clock Generator (CG) Configuration */
#define CLOCK_SETUP             (1U)
#define SYSCR_Val               (0x00010000UL)
#define OSCCR_Val               (0x00020501UL) /* OSCCR<OSCSEL> = 1, OSCCR<XEN2> = 0, OSCCR<XEN1> = 1, <HOSCON> = 1 */

#define STBYCR_Val              (0x00000003UL)

#define CG_8M_MUL_4_FPLL        (0x00006A0FUL<<1U)
#define CG_8M_MUL_5_FPLL        (0x00006A13UL<<1U)
#define CG_8M_MUL_6_FPLL        (0x00006917UL<<1U)
#define CG_8M_MUL_10_FPLL       (0x00006A26UL<<1U)
#define CG_8M_MUL_12_FPLL       (0x0000692EUL<<1U)

#define CG_10M_MUL_4_FPLL       (0x00006A0FUL<<1U)
#define CG_10M_MUL_5_FPLL       (0x00006A13UL<<1U)
#define CG_10M_MUL_6_FPLL       (0x00006917UL<<1U)
#define CG_10M_MUL_8_FPLL       (0x00006A1EUL<<1U)
#define CG_10M_MUL_10_FPLL      (0x00006A26UL<<1U)
#define CG_10M_MUL_12_FPLL      (0x0000692EUL<<1U)

#define CG_12M_MUL_4_FPLL       (0x00006A0FUL<<1U)
#define CG_12M_MUL_5_FPLL       (0x00006A13UL<<1U)
#define CG_12M_MUL_8_FPLL       (0x00006A1EUL<<1U)
#define CG_12M_MUL_10_FPLL      (0x00006A26UL<<1U)

#define CG_16M_MUL_4_FPLL       (0x00006A0FUL<<1U)

#define CG_PLLSEL_PLLON_SET                  ((uint32_t)0x00010000)
#define CG_PLLSEL_PLLON_CLEAR                ((uint32_t)0xFFFEFFFF)
#define CG_PLLSEL_PLLSEL_SET                 ((uint32_t)0x00020000)
#define CG_PLLSEL_PLLST_MASK                 ((uint32_t)0x00040000)

#define CG_OSCCR_XEN1_SET                    ((uint32_t)0x00000001)
#define CG_OSCCR_XEN2_CLEAR                  ((uint32_t)0xFFFFFFFD)
#define CG_OSCCR_HOSCON_SET                  ((uint32_t)0x00000400)
#define CG_OSCCR_OSCSEL_SET                  ((uint32_t)0x00000100)
#define CG_WUP_START_SET                     ((uint32_t)0x00004000)
#define CG_WUEF_VALUE_MASK                   ((uint32_t)0x00008000)
#define CG_OSCCR_WUPSEL2_SET                 ((uint32_t)0x00020000)
#define CG_OSCCR_WUPSEL1_CLEAR               ((uint32_t)0xFFFEFFFF)
#define CG_OSCCR_OSCF_MASK                   ((uint32_t)0x00000200)

#define WD_MOD_WDTE_SET                      ((uint32_t)0x00000080)

//#define PLLSEL_Ready            CG_16M_MUL_5_FPLL     /* -M46BSTK */
#define PLLSEL_Ready              CG_12M_MUL_5_FPLL     /* +M46BSTK */

#define PLLSEL_Val              (PLLSEL_Ready|0x00030000UL)
#define PLLSEL_MASK             (0x0000FFFEUL)

/*-------- <<< End of configuration section >>> ------------------------------*/

/*-------- DEFINES -----------------------------------------------------------*/
/* Define clocks */
#define OSC_8M                  ( 8000000UL)
#define OSC_10M                 (10000000UL)
#define OSC_12M                 (12000000UL)
#define OSC_16M                 (16000000UL)
//#define EXTALH                  OSC_16M     /* External high-speed oscillator freq */     /* -M46BSTK */
#define EXTALH                  OSC_12M     /* External high-speed oscillator freq */       /* +M46BSTK */
#define XTALH                   OSC_10M     /* Internal high-speed oscillator freq */

/* Configure Warm-up time */
#define HZ_1M                  (1000000UL)
#define WU_TIME_EXT            (5000UL)          /* warm-up time for EXT is 5ms   */
#define WU_TIME_PLL            (100UL)           /* warm-up time for PLL is 100us */
#define OSCCR_WUPT_MASK        (0x000FFFFFUL)
#define OSCCR_WUPT_EXT         ((uint32_t)(((uint64_t)WU_TIME_EXT * EXTALH / HZ_1M / 16UL) << 20U)) /* OSCCR<WUPT11:0> = warm-up time(us) * EXTALH / 16 */
#define OSCCR_WUPT_PLL         ((WU_TIME_PLL * EXTALH / HZ_1M /16UL) << 20U)

#if (CLOCK_SETUP)               /* Clock(external) Setup */
/* Determine core clock frequency according to settings */
/* System clock is high-speed clock*/
#if (OSCCR_Val & (1U<<8U))
  #define CORE_TALH (EXTALH)
#else
  #define CORE_TALH (XTALH)
#endif

#if ((PLLSEL_Val & (1U<<16U)) && (PLLSEL_Val & (1U<<17U)))   /* If PLL selected and enabled */
  #if (CORE_TALH == OSC_8M)                             /* If input is 8MHz */
    #if ((PLLSEL_Val & PLLSEL_MASK) == (CG_8M_MUL_4_FPLL))
      #define __CORE_CLK   (CORE_TALH * 4U )            /* output clock is 32MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_8M_MUL_5_FPLL))
      #define __CORE_CLK   (CORE_TALH * 5U )           /* output clock is 40MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_8M_MUL_6_FPLL))
      #define __CORE_CLK   (CORE_TALH * 6U )           /* output clock is 48MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_8M_MUL_8_FPLL))
      #define __CORE_CLK   (CORE_TALH * 8U )           /* output clock is 64MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_8M_MUL_10_FPLL))
      #define __CORE_CLK   (CORE_TALH * 10U )           /* output clock is 80MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_8M_MUL_12_FPLL))
      #define __CORE_CLK   (CORE_TALH * 12U )           /* output clock is 96MHz */
    #else                                               /* fc -> reserved */
      #define __CORE_CLK   (0U)
    #endif                                              /* End input is 8MHz */
  #elif (CORE_TALH == OSC_10M)                       /* If input is 10MHz */
    #if ((PLLSEL_Val & PLLSEL_MASK) == (CG_10M_MUL_4_FPLL))
      #define __CORE_CLK   (CORE_TALH * 4U )            /* output clock is 40MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_10M_MUL_5_FPLL))
      #define __CORE_CLK   (CORE_TALH * 5U )           /* output clock is 50MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_10M_MUL_6_FPLL))
      #define __CORE_CLK   (CORE_TALH * 6U )           /* output clock is 60MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_10M_MUL_8_FPLL))
      #define __CORE_CLK   (CORE_TALH * 8U )           /* output clock is 80MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_10M_MUL_10_FPLL))
      #define __CORE_CLK   (CORE_TALH * 10U )           /* output clock is 100MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == (CG_10M_MUL_12_FPLL))
      #define __CORE_CLK   (CORE_TALH * 12U )           /* output clock is 120MHz */
    #else                                               /* fc -> reserved */
      #define __CORE_CLK   (0U)
    #endif                                              /* End input is 10MHz */
  #elif (CORE_TALH == OSC_12M)                       /* If input is 12MHz */
    #if ((PLLSEL_Val & PLLSEL_MASK) == CG_12M_MUL_4_FPLL)
      #define __CORE_CLK   (CORE_TALH * 4U )            /* output clock is 48MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == CG_12M_MUL_5_FPLL)
      #define __CORE_CLK   (CORE_TALH * 5U )            /* output clock is 60MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == CG_12M_MUL_6_FPLL)
      #define __CORE_CLK   (CORE_TALH * 6U )            /* output clock is 72MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == CG_12M_MUL_8_FPLL)
      #define __CORE_CLK   (CORE_TALH * 8U )            /* output clock is 96MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == CG_12M_MUL_10_FPLL)
      #define __CORE_CLK   (CORE_TALH * 10U )            /* output clock is 120MHz */
    #else                                               /* fc -> reserved */
      #define __CORE_CLK   (0U)
    #endif                                              /* End input is 12MHz */
  #elif (CORE_TALH == OSC_16M)                       /* If input is 16MHz */
    #if ((PLLSEL_Val & PLLSEL_MASK) == CG_16M_MUL_4_FPLL)
      #define __CORE_CLK   (CORE_TALH * 4U )            /* output clock is 64MHz */
    #elif ((PLLSEL_Val & PLLSEL_MASK) == CG_16M_MUL_5_FPLL)
      #define __CORE_CLK   (CORE_TALH * 5U )            /* output clock is 80MHz */
    #else                                               /* fc -> reserved        */
      #define __CORE_CLK   (0U)
    #endif                                              /* End input is 16MHz    */
  #else                                                 /* input clock not known */
    #define __CORE_CLK   (0U)
    #error "Core Oscillator Frequency invalid!"
  #endif                                                /* End switch input clock */
#else
  #define __CORE_CLK   (CORE_TALH)
#endif

#if   ((SYSCR_Val & 7U) == 0U)                          /* Gear -> fc             */
  #define __CORE_SYS   (__CORE_CLK)
#elif ((SYSCR_Val & 7U) == 4U)                          /* Gear -> fc/2           */
  #define __CORE_SYS   (__CORE_CLK / 2U)
#elif ((SYSCR_Val & 7U) == 5U)                          /* Gear -> fc/4           */
  #define __CORE_SYS   (__CORE_CLK / 4U)
#elif ((SYSCR_Val & 7U) == 6U)                          /* Gear -> fc/8           */
  #define __CORE_SYS   (__CORE_CLK / 8U)
#elif ((SYSCR_Val & 7U) == 7U)                          /* Gear -> fc/16          */
  #define __CORE_SYS   (__CORE_CLK / 16U)
#else                                                   /* Gear -> reserved       */
  #define __CORE_SYS   (0U)
#endif

#else
  #define __CORE_SYS   (XTALH)

#endif                                                  /* clock Setup */

/* Clock Variable definitions */
uint32_t SystemCoreClock = __CORE_SYS;  /*!< System Clock Frequency (Core Clock) */


/**
 * Initialize the system
 *
 * @param  none
 * @return none
 *
 * @brief  Update SystemCoreClock according register values.
 */
void SystemCoreClockUpdate(void)
{                               /* Get Core Clock Frequency */
    uint32_t CoreClock = 0U;
    uint32_t CoreClockInput = 0U;
    uint32_t regval = 0U;
    uint32_t oscsel = 0U;
    uint32_t pllsel = 0U;
    uint32_t pllon = 0U;
    /* Determine clock frequency according to clock register values */
    /* System clock is high-speed clock */
    regval = TSB_CG->OSCCR;
    oscsel = regval & CG_OSCCR_OSCSEL_SET;
    if (oscsel) {  /* If system clock is External high-speed oscillator freq */
        CoreClock = EXTALH;
    } else {                    /* If system clock is Internal high-speed oscillator freq */
        CoreClock = XTALH;
    }
    regval = TSB_CG->PLLSEL;
    pllsel = regval & CG_PLLSEL_PLLSEL_SET;
    pllon = regval & CG_PLLSEL_PLLON_SET;
    if (pllsel && pllon) {                        /* If PLL enabled  */
        if (CoreClock == OSC_8M) {                                          /* If input is 8MHz */
            if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_8M_MUL_4_FPLL) {
                CoreClockInput = CoreClock * 4U;                             /* output clock is 32MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_8M_MUL_5_FPLL) {
                CoreClockInput = CoreClock * 5U;                            /* output clock is 40MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_8M_MUL_6_FPLL) {
                CoreClockInput = CoreClock * 6U;                            /* output clock is 48MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_8M_MUL_10_FPLL) {
                CoreClockInput = CoreClock * 10U;                            /* output clock is 80MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_8M_MUL_12_FPLL) {
                CoreClockInput = CoreClock * 12U;                            /* output clock is 96MHz */
            } else {
                CoreClockInput = 0U;                                         /* fc -> reserved            */
            }
        } else if (CoreClock == OSC_10M) {                                  /* If input is 10MHz */
            if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_10M_MUL_4_FPLL) {
                CoreClockInput = CoreClock * 4U;                             /* output clock is 40MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_10M_MUL_5_FPLL) {
                CoreClockInput = CoreClock * 5U;                            /* output clock is 50MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_10M_MUL_6_FPLL) {
                CoreClockInput = CoreClock * 6U;                            /* output clock is 60MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_10M_MUL_8_FPLL) {
                CoreClockInput = CoreClock * 8U;                            /* output clock is 80MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_10M_MUL_10_FPLL) {
                CoreClockInput = CoreClock * 10U;                            /* output clock is 100MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_10M_MUL_12_FPLL) {
                CoreClockInput = CoreClock * 12U;                            /* output clock is 120MHz */
            }else {
                CoreClockInput = 0U;                                         /* fc -> reserved */
            }
        } else if (CoreClock == OSC_12M) {                                  /* If input is 12MHz */
            if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_12M_MUL_4_FPLL) {
                CoreClockInput = CoreClock * 4U;                             /* output clock is 48MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_12M_MUL_5_FPLL) {
                CoreClockInput = CoreClock * 5U;                             /* output clock is 60MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_12M_MUL_8_FPLL) {
                CoreClockInput = CoreClock * 8U;                             /* output clock is 96MHz */
            } else if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_12M_MUL_10_FPLL) {
                CoreClockInput = CoreClock * 10U;                             /* output clock is 120MHz */
            } else {
                CoreClockInput = 0U;                                         /* fc -> reserved */
            }
        } else if (CoreClock == OSC_16M) {                                  /* If input is 16MHz */
            if ((TSB_CG->PLLSEL & PLLSEL_MASK) == CG_16M_MUL_4_FPLL) {
                CoreClockInput = CoreClock * 4U;                             /* output clock is 64MHz */
            } else {
                CoreClockInput = 0U;                                         /* fc -> reserved        */
            }
        } else {
            CoreClockInput = 0U;
        }
    } else {
        CoreClockInput = CoreClock;
    }
    switch (TSB_CG->SYSCR & 7U) {
    case 0U:
        SystemCoreClock = CoreClockInput;                                    /* Gear -> fc      */
        break;
    case 1U:
    case 2U:
    case 3U:                                                                 /* Gear -> reserved */
        SystemCoreClock = 0U;
        break;
    case 4U:                                                                 /* Gear -> fc/2     */
        SystemCoreClock = CoreClockInput / 2U;
        break;
    case 5U:                                                                 /* Gear -> fc/4     */
        SystemCoreClock = CoreClockInput / 4U;
        break;
    case 6U:                                                                 /* Gear -> fc/8     */
        SystemCoreClock = CoreClockInput / 8U;
        break;
    case 7U:                                                                 /* Gear -> fc/16     */
        if (CoreClockInput >= OSC_16M){
        SystemCoreClock = CoreClockInput / 16U;
        } else{
             SystemCoreClock = 0U;
        }
        break;
    default:
        SystemCoreClock = 0U;
        break;
    }
}

/**
 * Initialize the system
 *
 * @param  none
 * @return none
 *
 * @brief  Setup the microcontroller system.
 *         Initialize the System.
 */
void SystemInit(void)
{
    uint32_t regval = 0U;
    volatile uint32_t pllst = 0U;
    volatile uint32_t wuef = 0U;
    volatile uint32_t oscf = 0U;
    uint32_t wdte = 0U;

#if defined ( __CC_ARM  )/*Enable FPU for Keil*/
  #if (__FPU_USED == 1)                        /* __FPU_USED is defined in core_cm4.h */
    /* enable FPU if available and used */
    SCB->CPACR |= ((3UL << 10*2) |             /* set CP10 Full Access                */
                   (3UL << 11*2)  );           /* set CP11 Full Access                */
  #endif
#endif 

#if (WD_SETUP)                  /* Watchdog Setup */
    while (TSB_WD->FLG != 0U) {
    }                /* When writing to WDMOD or WDCR, confirm "0" of WDFLG<FLG>. */
    TSB_WD->MOD = WDMOD_Val;
    regval = TSB_WD->MOD;
    wdte = regval & WD_MOD_WDTE_SET;
    if (!wdte) {     /* If watchdog is to be disabled */
        TSB_WD->CR = WDCR_Val;
    } else {
        /*Do nothing*/
    }
#endif

#if (CLOCK_SETUP)               /* Clock(external) Setup */
    TSB_CG->SYSCR = SYSCR_Val;
    TSB_CG->OSCCR &= OSCCR_WUPT_MASK;
    TSB_CG->OSCCR |= OSCCR_WUPT_EXT;
    TSB_CG->OSCCR |= CG_OSCCR_HOSCON_SET;
    TSB_CG->OSCCR |= CG_OSCCR_XEN1_SET;
    TSB_CG->OSCCR |= CG_OSCCR_WUPSEL2_SET;
    TSB_CG->OSCCR &= CG_OSCCR_WUPSEL1_CLEAR;
    TSB_CG->OSCCR |= CG_WUP_START_SET;
    wuef = TSB_CG->OSCCR & CG_WUEF_VALUE_MASK;
    while (wuef) {
        wuef = TSB_CG->OSCCR & CG_WUEF_VALUE_MASK;
    }                           /* Warm-up */
    TSB_CG->OSCCR |= CG_OSCCR_OSCSEL_SET;
    oscf = TSB_CG->OSCCR & CG_OSCCR_OSCF_MASK;
    while (oscf != CG_OSCCR_OSCF_MASK) {
        oscf = TSB_CG->OSCCR & CG_OSCCR_OSCF_MASK;
    }                         /* Confirm CGOSCCR<OSCF>="1" */
    /* TSB_CG->OSCCR &= CG_OSCCR_XEN2_CLEAR ; */  /* IHOSC should be not stopped for using WDT. */

    TSB_CG->OSCCR &= OSCCR_WUPT_MASK;
    TSB_CG->OSCCR |= OSCCR_WUPT_PLL;
    TSB_CG->PLLSEL &= CG_PLLSEL_PLLON_CLEAR;
    TSB_CG->PLLSEL = PLLSEL_Ready;
    TSB_CG->OSCCR |= CG_WUP_START_SET;
    wuef = TSB_CG->OSCCR & CG_WUEF_VALUE_MASK;
    while (wuef) {
        wuef = TSB_CG->OSCCR & CG_WUEF_VALUE_MASK;
    }                           /* Warm-up */

    TSB_CG->OSCCR &= OSCCR_WUPT_MASK;
    TSB_CG->OSCCR |= OSCCR_WUPT_PLL;
    TSB_CG->PLLSEL |= CG_PLLSEL_PLLON_SET;    /* PLL enabled */
    TSB_CG->STBYCR = STBYCR_Val;
    TSB_CG->OSCCR |= CG_WUP_START_SET;
    wuef = TSB_CG->OSCCR & CG_WUEF_VALUE_MASK;
    while (wuef) {
        wuef = TSB_CG->OSCCR & CG_WUEF_VALUE_MASK;
    }                           /* Warm-up */
    TSB_CG->PLLSEL |= CG_PLLSEL_PLLSEL_SET;
    pllst = TSB_CG->PLLSEL & CG_PLLSEL_PLLST_MASK;
    while (pllst != CG_PLLSEL_PLLST_MASK) {
        pllst = TSB_CG->PLLSEL & CG_PLLSEL_PLLST_MASK;
    }                        /*Confirm CGPLLSEL<PLLST> = "1" */

#endif
}