{
    "name": "SX126X-lora-driver",
    "requires": ["lora"],
    "config": {
        "spi-frequency": {
        	"help": "SPI frequency, Default: 16 MHz",
        	"value": 16000000
        },
        "buffer-size": {
        	"help": "Max. buffer size the radio can handle, Default: 255 B",
        	"value": 255
        },
        "boost-rx": {
        	"help": "Increases sensitivity at the cost of power ~2mA for around ~3dB in sensitivity 0 = disabled, 1 = enabled",
        	"value": 0
        },
        "regulator-mode": {
        	"help": "Default: DCDC (low power, high BOM). Alternatively, LDO = 0. Check datasheet section 5.1 for more details",
        	"value": 1
        },
        "sleep-mode": {
        	"help": "Default: Cold start = 1, Warm start = 0. Check SleepMode.txt",
        	"value": 1
        },
        "standby-mode": {
        	"help": "Default: STDBY_RC = 0, STDBY_XOSC = 1",
        	"value": 0
        },
        "device-variant": {
            "help": "Default: -1 = use device-select, SX1261, SX1262, SX1268",
            "value": -1
        },
        "freq-support": {
            "help": "Default: -1 = use freq-select, MATCHING_FREQ_169, MATCHING_FREQ_280, MATCHING_FREQ_434, MATCHING_FREQ_490, MATCHING_FREQ_780, MATCHING_FREQ_868, MATCHING_FREQ_915",
            "value": -1
        },
        "xtal": {
            "help": "Default: -1 = use crystal-select, TXCO = 0, XTAL = 1",
            "value": -1
        },
        "spi-mosi": {
            "value": "NC"
        },
        "spi-miso": {
            "value": "NC"
        },
        "spi-sclk": {
            "value": "NC"
        },
        "spi-cs": {
            "value": "NC"
        },
        "reset": {
            "value": "NC"
        },
        "dio1": {
            "value": "NC"
        },
        "busy": {
            "value": "NC"
        },
        "freq-select": {
            "value": "NC"
        },
        "device-select": {
            "value": "NC"
        },
        "crystal-select": {
            "value": "NC"
        },
        "ant-switch": {
            "value": "NC"
        }
    }
}