In class MBRBlockDevice the tole32 function had used union member
names u32 and u8. The introduction of REALTEK_RTL8195AM cauesd a
conflict with type names in basic_types given they're aliased as
macros to uint32_t and uint8_t respectively.
The old open/opendir functions did not provide a route for errors and
relied on implementations manually setting errno. Updated to return
errors directly.
Required for other representations of FileSystems, ie LocalFileSystem
Introduces FileSystemHandle for the same behaviour as FileHandle and
DirHandle.
Requires the following to hook into file/dir lookup:
```
int open(FileHandle **file, const char *filename, int flags)
int open(DirHandle **dir, const char *path)
```
This hook is provided by the FileSystem class, so requires no changes
from implementations.
This is necessary for support of block devices with >512 byte
blocks, such as most SPI flash parts.
- Enabled support of up to 4096 byte blocks
- Added support for heap-backed buffers using _FS_HEAPBUF
- Necessary to avoid stack overflows
- Avoids over-aggresive allocations of _MAX_SS
- Enabled _FS_TINY to further reduce memory footprint
- Haven't found a downside for this yet except for possible
thread contention
Add the attribute flash to enable priority inheritance and robust mode.
The robust flag allows mutexes held by terminated threads to be
properly released.
External EMAC drivers are currently directly attaching to lwip_stack.c
via mbed_lwip_bringup et al. Restore the original prototypes to avoid
compatibility breakage.
For keep supporting external APIs with the same name (supposedly there are a larger
number of users of those APIs), BufferedSerial and ATParser are being renamed.
BufferedSerial becomes UARTSerial, will complement a future USBSerial etc.
ATParser becomes ATCmdParser.
* UARTSerial moves to /drivers
* APN_db.h is moved from platform to cellular/util/.
* Original CellularInterface is restored for backward compatability (again, supposedly there
are users of that).
* A new file, CellularBase is added which will now servce as the base class for all
upcoming drivers.
* Special restructuring for the driver has been undertaken. This makes a clear cut distinction
between an on-board or an off-board implementation.
- PPPCellularInterface is a generic network interface that works with a generic FileHandle
and PPP. A derived class is needed to pass that FileHandle.
- PPPCellularInterface provides some base functionality like network registration, AT setup,
PPP connection etc. Lower level job is delegated to the derived classes and various modem
specific APIs are provided which are supposed to be overridden.
- UARTCellularInterface is derived from PPPCellularInterface. It constructs a FileHandle and
passes it back to PPPCellularInterface as well as provides modem hangupf functionality.
In future we could proive a USBInterface that would derive from PPPCellularInterface and could
pass the FileHandle back.
- OnboardCellularInterface is derived from UARTCellularInterfae and provides hooks to
the target provided implementation of onbard_modem_api.h. An off-board modem, i.e, a modem on
a shield has to override the modem_init(), modem_power_up() etc as it cannot use
onboard_modem_api.h.
Some targets define MBEDTLS_md5_C in targets.json in order to force the system to use
external mbedtls instead of lwip internal crypt, i.e., polarssl.
LWIP's internal md5 mechanism is tied to PPP for some reason. In a previosly merged commit
an attempt was made to steal md5 functions by faking that PPP was turned on. However
that solution was broken in case of really turning on PPP functionality.
This commit fixes the breakage and also corrects the logic in case a target decides to use
external md5 implementation from mbedtls or otherwise (i.e, wants to stick to the internal
implementation).
* Implements CellularInterface
* Reference design for CellularInterface implementations
* Uses an external mbed-os IP stack and talks to modem over PPP.
GCC have not been capable enough to catch some linker errors which arose when
ethernet support for LWIP was disabled. Checks have been added to make sure that
unrefrenced code is not linked in.
nsapi_ppp glue layer is made more transparent to public cellular API. Storage of IP
addresses is removed. PPP layer already stores the addresses, so we pass the pointer back
to the upper layers.
If PPP is not used, we provide dummy functions.
* state machine corrections
* adding various standard API methods
* Addition/revision/enhancement of the nsapi_ppp glue layer
* Turning off debug by default
Mainly reutilizing code from ublox C027 support lib.
As we are using external PDP context, i.e., an external IP stack,
we will pass username and password to underlying stack running PPP.
We only support CHAP as the authentication protocol.
POSIX poll() provides a mechanism to attach a POLL_HUP event
if the modem or device hangs up on you. POLL_HUP and POLL_OUT are
mutually exclusive. We poll in the PPP_input() routine if the modem
hung up. If it did we stop the data consumption, close PPP and go back
to the driver for reserruction of AT parser and subsequent retries or
application specific actions.
This is achieved by attaching an interrupt to the DCD line of the modem.
When DCD line goes high (off), we have lost the carrier. So we record an
POLLHUP event using _poll_change().
In case of carrier lost, we would like to inform PPP data pump.
That involved setting up link status flag down semaphores.
mbed_lwip_bringup() and mbed_lwip_bringdown() had been Ethernet specific only.
We extend these routines to support PPP as well. Currently we support only one interface
at a time. However, future enhancement to multi interface support should be trivial.
mbed_ppp_init() is extended to take a function ptr.
ppp_lwip will call this callback upon a change in ppp link status.
in the beginning, the Ublox driver waits until the PPP link is established properly.
We introduce here mbed_trace to ppp_lwip shim layer.
If for some reason, FEATURE_COMMON_PAL is not included in the build,
dummies for trace functions are provided.
Add configuration to control Ethernet, PPP and TCP support.
Replaces LWIP_TRANSPORT_ETHERNET/PPP defines formerly used by targets.
Ethernet and PPP can be enabled simultaneously.
DHCPv4 is now only enabled if IPv4 and Ethernet are both enabled - we
assume PPP uses IPCP for configuration.
PPP configuration adjusted to cope with LWIP 2.0 changes, and
optimised for RAM a little.
This is a glue layer between LWIP PPP implementation and a device type FileHandle
stream. This enables an external interface which has a FileHandle, utilize LWIP network
stack via PPP, e.g., Cellular device, WiFi chips etc.
Its totally transparent to external device. Only thing this layer is interested in, is a
FileHandle. Similar is true for for the external device, it just hands over its stream to this
PPP layer and rest of the magic is done by this layer.
Use a newer version of uVisor that doesn't change the box main thread
function type. Previously, we required all box main thread definitions
to change from taking a `const void *` to a `void *` when moving to
RTX5. We now are backwards compatibile.
Jaeden Amero
Niklas Hauser
Sam Grove
Yuguo Zou
Christopher Haster
Martin Kojtal
Russ Butler
Kevin Bracey
Jimmy Brisson
Hasnain Virk
Bartek Szatkowski