* Use compile-time detection of hardware CRC capability, so unneeded
code and tables do not go into the image.
* Add global JSON config option to allow choice between no tables,
16-entry tables or 256-entry tables for software CRC. Default set
to 16-entry, reducing ROM size from previous 256-entry.
* Allow manual override in template parameter to force software or
bitwise CRC for a particular instance.
* Micro-optimisations, particularly use of `RBIT` instruction and
optimising bitwise computation using inline assembler.
Incompatible changes:
* Remove special-case "POLY_32BIT_REV_ANSI" - users can use standard
POLY_32BIT_ANSI, which now uses the same 16-entry tables by default,
or can use hardware acceleration, which was disabled for
POLY_32BIT_REV_ANSI. MbedCRC<POLY_32BIT_ANSI, 32, CrcMode::TABLE> can
be used to force software like POLY_32BIT_REV_ANSI.
* The precomputed table for POLY_16BIT_IBM had errors - this has been
corrected, but software CRC results will be different from the previous
software calculation.
* < 8-bit CRC results are no longer are shifted up in the output value,
but placed in the lowest bits, like other sizes. This means that code
performing the SD command CRC will now need to use `(crc << 1) | 1`,
rather than `crc | 1`.
-Added "rtos-api" in TESTS/configs/baremetal.json
-some test case used thread_sleep_for instead Thisthread::sleep_for
-Added the EOF character
-Disable completely the non supported test cases
Extend the deepsleep wait up to 220% of the Watchdog timeout.
One of the current Watchdog timing requirements is to fire BEFORE twice
the timeout value, but at least one target (K64F) is expected to fire
EXACTLY at a doubled timeout value in deepsleep mode. This patch updates
the test to cope with a new deepsleep timing requirement.
Add a watchdog-kicking thread running in the background when the test
suite is handling a failed assertion. A single watchdog kick did not
provide enough time for the greentea communication if the watchdog
reset happened later than expected.
Watchdog::stop() is called in this test. If the target does not support
stopping the watchdog this case needs to be skipped.
Also improve handling ignored test cases.
Update the watchdog timing requirements:
1. The watchdog should trigger at, or after the timeout value.
2. The watchdog should trigger before twice the timeout value.
Use a SERIAL_FLUSH_TIME_MS value consistent with other tests.
Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
The Watchdog driver has been updated making these tests incompatible
with the new API. The Watchdog driver functionality is tested with the
unit tests located in UNITTESTS/drivers/Watchdog/ .
Deprecate wait() in favour of acquire(), try_acquire(),
try_acquire_for() and try_acquire_until().
Brings Semaphore more into line with CMSIS-RTOS 2 (which uses "acquire"),
itself (as it has "release"), and other classes having "try", "try for"
and "try until".
Also steps away from vague "wait" term - the primary operation here is
to acquire the semaphore, and this will of course sleep.
* capitalize driver class name,
* reword test docs for the driver & HAL,
* capitalize Mbed name,
* reword the comments explaining the SERIAL_FLUSH_TIME_MS macro.
Martin Kojtal
Kevin Bracey
RAJKUMAR KANAGARAJ
Filip Jagodzinski
Mike Naberezny
int_szyk
Evelyne Donnaes
Seppo Takalo
Arto Kinnunen
Chun-Chieh Li
Neil Tuttle
Anna Bridge
d-kato
Przemyslaw Stekiel
Laurent Meunier
Amanda Butler
Donatien Garnier