Update the cryptocell 310 IAR libraries, since the previous ones were not
built correct. The libraries were built from the Cryptocell 310
release version 1.1.0.1285, using IAR version 7.80.1.11864.
This PR addresses the issue of #8124.
It updates and enriches the wifi connection error type to adapt the Network Socket test plan requirement.
In the meantime, it increases the heap size that allows the transmission of larger packet size.
Description
1. Increase heap size in lwipstack\mbed_lib.json to fulfill bursty TCP and UDP transmission requirement.
2. Modify and enrich wifi connection error types in TARGET_AMEBA\RTWInterface.cpp to adapt the decision logic of the wifi test cases.
3. Add new static constants in TARGET_AMEBA\RTWInterface.h, including 'SSID_MAX_LENGTH', 'PASSPHRASE_MAX_LENGTH' and 'PASSPHRASE_MIN_LENGTH' to help verifying the validity of ssid and passphrase.
Pull request type
[x] Fix
[ ] Refactor
[ ] Target update
[ ] Functionality change
[ ] Docs update
[ ] Test update
[ ] Breaking change
As part of the ESP8266 connect sequence, ESP8266Interface::connect,
a software reset is performed. If the ESP8266 had been connected
previously then the ESP8266 will sometimes send a "WIFI DISCONNECT" OOB
message before performing the software reset. This causes the
ESP8266::_oob_connection_status to change its state (_conn_status) from
NSAPI_STATUS_DISCONNECTED to NSAPI_STATUS_CONNECTING. This causes
ESP8266Interface::_startup, called later in the boot seqeunce, to skip
ESP8266::startup. Without this call socket mux mode (CIPMUX=1) is never
enabled and all send commands using this format fail with a "Link Type"
error.
This patch fixes that problem by unconditionally calling
ESP8266::startup as part of the ESP8266 connect sequence.
ARM C library is really good at optimising out calls to underlying
seek. The only ones we were actually detecting in the empty file case
were the ones that the default FileHandle::size() made itself during
the SEEK_END case.
When we implement TestFile::size() directly, we will no longer see
a single seek call from the ARM C library in the empty file case, so
remove those tests.
Beef up the non-empty file case, adding checks that we are making
underlying read+write calls in the correct position, as a proxy for
direct checks for underlying seek being called.
Add support for the KW41Z side of the RapidIoT platform. This requires the latest
DAPLink binary to be programmed on the RapidIoT platform, binary can be downloaded
from the below link:
https://armmbed.github.io/DAPLink/
Also, the KW41Z side on RapidIoT does not have a serial port connected to the Debug
terminal. Therefore a SerialPassThrough program should be flashed and running on the
K64F side of RapidIoT platform for the mbed tests to pass.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
In QUECTEL_BG96 and QUECTEL_BC95 there was missing #ifdefs for
PPP mode and our stack was used. Also BG96 needed to be added
AT_CellularBase::AT_CGDATA as not supported.
Ron Eldor
jeromecoutant
Lu
Martin Kojtal
ccli8
Cruz Monrreal
Russ Butler
fluidblue
Oren Cohen
Brian Daniels
Christopher Haster
Kevin Bracey
deepikabhavnani
Mahesh Mahadevan
Alastair D'Silva
Teemu Kultala
Laurent Louf
Teppo Järvelin
Conrad Braam