f5ac8d69ce
Nordic: Adjust RAM requirements.
2018-05-15 14:51:16 +01:00
ed20b17d29
Nordic BLE: Fix link count
2018-05-15 14:51:16 +01:00
0f51ea031e
Merge pull request #6610 from pauluap/stm32_eth_remove_tx_rx_locking_interrupt_perforation
...
Stm32 eth remove tx rx locking interrupt perforation
2018-05-07 10:51:03 -05:00
ab81b61e6c
Merge pull request #6657 from tsailer/exporter-codeblocks-ncs
...
add ncs36510 fib and trim generation
2018-05-07 10:40:51 -05:00
e023bb67c4
Merge pull request #6771 from marcuschangarm/fix-uart-init
...
Fix UART initialization for NRF52
2018-05-07 10:35:40 -05:00
809f183eeb
Merge pull request #6768 from deepikabhavnani/iar_nan0130
...
Nano 100: Lower HEAP size for IAR
2018-05-07 10:32:30 -05:00
5a77f42882
Merge pull request #6796 from marcuschangarm/fix-nrf52-tick
...
Fix us_ticker for NRF52 series
2018-05-07 08:17:58 +01:00
6361e92d62
Merge pull request #6798 from marcuschangarm/fix-mbr
...
Fix bug in MBR for NRF52 series
2018-05-04 18:58:14 +01:00
e43d21d4ef
Merge pull request #6713 from theotherjimmy/arm-no-asm-inc
...
Drop include paths for ARM assembler
2018-05-03 16:31:04 +01:00
45b3fffe9a
Merge pull request #6729 from JammuKekkonen/f411re_add_bootloader_support
...
Add bootloader support for NUCLEO_F411RE target
2018-05-03 16:30:29 +01:00
1f6ded136c
Merge pull request #6778 from maximmbed/max32625mbed-update-leds
...
Add support for open drain leds
2018-05-03 16:25:04 +01:00
0c61cf4a37
Merge pull request #6785 from codeauroraforum/Fix_KL82Z_PWMOUT
...
KL82Z: Fix clock selection for PWMOUT driver
2018-05-03 16:24:07 +01:00
41c1654a49
Fix bug in MBR for NRF52 series
...
The MBR VTOR state depends on how the application is booted.
This makes it difficult to initialize the MBR correctly since a
bug prevents the MBR from being initialized more than once.
This commit resets the MBR and SoftDevice to a known state before
initializing the MBR and setting the VTOR through the SoftDevice.
2018-05-02 21:10:41 -07:00
b8f22bbec1
Fix us_ticker for NRF52 series
...
Changed comparison function when setting ticker timeout to fix
tickers not set correctly.
2018-05-02 16:10:14 -07:00
a1a329606b
Fix UART initialization for NRF52
...
Delayed initialization can cause problems when both UARTE instances
are in use. This change causes each UART object to initialize the
underlying UARTE instance immediately.
2018-05-02 15:07:13 -07:00
87244a969b
KW41Z: Update SDK TPM driver
...
Certain instances of the TPM are missing some registers, updated
TPM driver handles this variation. This issue was discovered when
running the PWMOUT tests using the ci-test-shield
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-01 14:48:12 -05:00
0fb2f01ce7
KL82Z: Fix clock selection for PWMOUT driver
...
This was verified using the ci-test shield
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-05-01 12:22:04 -05:00
ca4937d40d
Add support for open drain leds
2018-04-30 15:27:07 -05:00
d08c819830
Merge pull request #6746 from marcuschangarm/fix-vector-relocation
...
Fix vector table relocation for NRF52
2018-04-30 13:51:22 -05:00
e1cc4559cf
Merge pull request #6748 from andrewleech/nrf52_serial_match_assert
...
nrf5x: Fix assert test on SERIAL_RESERVED_CHAR_MATCH
2018-04-30 11:50:05 -05:00
ba4aa3f3a6
Updating HEAP size
...
IAR 7.8 does not support dynamic heap, and some test/addition of new
feature fail on this device because of less static RAM memory.
Reducing the heap memory size for the same reason.
2018-04-27 15:48:52 -05:00
bb14051588
Fix vector table relocation for NRF52
...
The vector table relocation sequence depends on:
1. Whether the SoftDevice is present.
2. The Application is a bootloader or not.
If the SoftDevice is present and the application is a bootloader
the MBR must be initialized to trap SoftDevice service calls
before setting the new vector table address.
The SCB->VTOR must be set to point at the MBR as well.
If the SoftDevice is not present the SCB->VTOR can point at the
new vector table directly.
2018-04-27 13:40:50 -07:00
d06ad9b834
Merge pull request #6696 from hug-dev/cm3ds-cleaning
...
CM3DS Maintenance Pull Request: Cleaning
2018-04-26 20:20:31 -05:00
6ccc963b61
Merge pull request #6733 from maximmbed/fix-compiler-warnings
...
Fix compiler warnings for Maxim platforms
2018-04-26 20:18:32 -05:00
487576972b
Merge pull request #6720 from marcuschangarm/fix-sdk-spi
...
Fix bug in Nordic SDK 14.2 SPI driver
2018-04-26 20:17:36 -05:00
9d6d8c7273
Merge pull request #6721 from marcuschangarm/fix-sdk-i2c
...
Fix bug in Nordic SDK 14.2 I2C driver
2018-04-26 20:17:25 -05:00
4e1c04feba
Merge pull request #6734 from codeauroraforum/Fix_LPC54XXX_GPIO
...
LPC54XXX: Set the pin function to Digital mode
2018-04-26 20:17:07 -05:00
627d028f3e
nrf5x: Add description to assert on SERIAL_RESERVED_CHAR_MATCH
2018-04-27 11:05:47 +10:00
d2cf341348
Add bootloader support for NUCLEO_F411RE target
2018-04-26 16:19:43 +03:00
5ee2658dae
Merge pull request #6701 from SiliconLabs/feature/update-rail
...
Update to EFR32 15.4 driver
2018-04-25 13:17:33 +01:00
a858454451
Merge pull request #6717 from marcuschangarm/fix-spi-pins
...
Fix NRF52 SPI pin initialization
2018-04-25 13:17:05 +01:00
beb8da965c
Merge pull request #6735 from codeauroraforum/Add_GPIO_IRQ_Check
...
LPC546XX: Add check for GPIO IRQ
2018-04-25 13:16:01 +01:00
6513091173
LPC546XX: Add check for GPIO IRQ
...
GPIO IRQ is available on pins for Ports 0 & 1. Add
a check to return error for other ports.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-24 14:26:20 -05:00
2670f790ce
LPC546XX: Set the pin function to Digital mode
...
We cannot rely on the default value as a pin could
be use for Analog purposes in which this bit is cleared
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2018-04-24 11:24:23 -05:00
fc7c70dbc6
Fix the initialization of a structure
2018-04-24 11:13:19 -05:00
7b5a79f56e
STM32 RTC Init minor update
2018-04-24 13:50:57 +02:00
3edfc77949
Fix bug in Nordic SDK 14.2 I2C driver
...
Interrupts were not enabled before transmitting data leading to
missed interrupts.
2018-04-23 16:38:31 -07:00
cba7e0df06
Fix bug in Nordic SDK 14.2 SPI driver
...
Interrupts were not enabled before transmitting data leading to
missed interrupts.
2018-04-23 16:08:44 -07:00
0ca1a61ba0
Remove the redundant input parameter
2018-04-23 16:37:55 -05:00
1f0809a56b
Add the missing input parameter
2018-04-23 16:37:55 -05:00
85bc74cc1d
Fix the return type to allow returning error
2018-04-23 16:37:55 -05:00
11cf79ecb0
Add type cast
2018-04-23 16:37:55 -05:00
6db4425351
Fix NRF52 SPI pin initialization
...
SPI pins are not initialized correctly according to the current
SPI mode.
This commit changes how the SPI instance is configured and ensures
that:
1. SPI pins are initialized on each object initialization.
2. SPI pins are reinitialized on each mode or object change.
3. SPI instance is only initialized when a change has occured.
2018-04-23 14:27:33 -07:00
d0e09851ac
Use rel path for the ONLY arm asm include statement
2018-04-23 15:23:35 -05:00
b033a6e42e
Merge pull request #6703 from 0xc0170/fix_kl27z_flash
...
KL27Z: Flash protection macro addition
2018-04-23 15:14:13 -05:00
a15c2f0b22
Merge pull request #6666 from bcostm/PULL_REQUEST_CUBE_UPDATE_L0_V1.10.0
...
STM32L0: Update with CubeL0 V1.10.0
2018-04-23 11:01:13 -05:00
a27700da33
Merge pull request #6683 from ganesh-ramachandran/master
...
Add IAR export and nvstore page size fix for TMPM46B
2018-04-23 10:53:55 -05:00
8e2398520a
Merge pull request #6686 from maximmbed/max32620c-fix-i2c
...
Remove automatic I2C stop after each read
2018-04-23 10:52:51 -05:00
38846b2a6c
Merge pull request #6690 from li-ho/ev-cog-bootloader
...
ADI: Enable bootloader for EV_COG_AD3029LZ and EV_COG_AD4050LZ
2018-04-23 10:51:41 -05:00
780c4c537a
Revert file permissions to non-executable
2018-04-23 08:21:20 -05:00
Vincent Coubard
Cruz Monrreal
Martin Kojtal
Marcus Chang
Mahesh Mahadevan
Keyur Hariya
Jimmy Brisson
deepikabhavnani
Andrew Leech
Jammu Kekkonen
jeromecoutant
Steven Cooreman