632098de94
Add watchdog clock accuracy to NXP targets.
2019-09-30 08:10:24 +02:00
cb5311654c
Add watchdog clock accuracy to Cypress targets.
2019-09-30 08:10:24 +02:00
54d962a240
Moved TriggerMux initialization out of the HAL and into the BSP since that is what dictates what trigger muxes actually need to be used
2019-09-27 13:01:38 -07:00
a3f82738dd
FASTMODEL: enable PSA tests for fastmodel
2019-09-27 15:59:42 +01:00
4bbbad3d79
FASTMODEL: add simulated TRNG implementation to fastmodel
2019-09-27 15:58:28 +01:00
4c1067b8b8
Fixed missing #if in port_api.c
2019-09-27 14:44:20 +02:00
f45ca72f11
[M252KG] Remove TRNG support
...
Reasons to remove TRNG support:
1. M252 just has 32KiB SRAM and cannot afford mbedtls application.
2. Implementing TRNG HAL with PRNG H/W has security concern.
2019-09-27 17:50:48 +08:00
0168304e5b
[M252KG] Add BSD-3-Clause license for BSP files
2019-09-27 17:45:57 +08:00
967effe59f
[M252KG] Free up peripheral pins in peripheral free-up HAL API
...
Without free-up of peripheral pins, peripheral pins of the same peripheral may
share by multiple ports after port iteration, and this peripheral may fail with
pin interference.
2019-09-27 17:45:56 +08:00
38aaee0c1a
[M252KG] Support GPIO input pull-high/pull-low
...
In Nuvoton, only new-design chips support GPIO input pull-high/pull-low modes.
Targets not supporting this feature are listed below:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
2019-09-27 17:45:56 +08:00
1447d9049f
[M252KG] Fix redundant call to UART IRQ handler
...
Honor RxIrq/TxIrq to avoid redundant call to UART IRQ handler.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-uart.
2019-09-27 17:45:55 +08:00
d9217ed77a
[M252KG] Fix redundant SPI clock generation
...
Fix SPI clocks are generated redundantly at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - async mode.
2019-09-27 17:45:55 +08:00
c68af32a4c
[M252KG] Fix I2C NACK error
...
Fix logic error on replying NACK at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-i2c/
i2c - test single byte read i2c API.
2019-09-27 17:45:55 +08:00
0917a0d5a6
[M252KG] Fix IP initialization sequence
...
Better IP initialization sequence:
1. Configure IP pins
2. Select IP clock source and then enable it
3. Reset the IP (SYS_ResetModule)
NOTE1: IP reset takes effect regardless of IP clock. So it doesn't matter if
IP clock enable is before IP reset.
NOTE2: Non-configured pins may disturb IP's state, so IP pinout first and then
IP reset.
NOTE3: IP reset at the end of IP initialization sequence can cover unexpected
situation.
2019-09-27 17:45:54 +08:00
4bb7fde6b5
[M252KG] Exclude USB UART from testing
...
USB UART is dedicated to USB COM and so must exclude from FPGA CI testing.
2019-09-27 17:45:54 +08:00
cd73422345
[M252KG] Force enum PinName to 32-bit
...
NU_PINNAME_BIND(...) requires enum PinName to be 32-bit to encode module
binding information in it.
2019-09-27 17:45:54 +08:00
a8f0817cdb
[M252KG] Enlarge LPTICKER_DELAY_TICKS for safe
...
On Nuvoton targets, lp_ticker_set_interrupt(...) needs around 3 lp-ticker
ticks to take effect. It may miss when current tick and match tick are very
close (see hal/LowPowerTickerWrapper.cpp). Enlarge LPTICKER_DELAY_TICKS to
4 from 3 to address this boundary case.
2019-09-27 17:45:53 +08:00
a5afcd6115
[M252KG] Enlarge required deep sleep latency
...
This configuration is to pass wake-up from deep-sleep test such as mbedmicro-rtos-mbed-systimer.
2019-09-27 17:45:53 +08:00
538f55f9ff
[M252KG] Add 'sectors' target configuration parameter
2019-09-27 17:45:53 +08:00
d0ffd9510f
[M252KG] Override mpu-rom-end to 0x1fffffff
...
Without this override, mpu hal will require 5 mpu regions which exceed 4 mpu
regions supported by M252 (see hal/mpu/mbed_mpu_v8m.c). In this scenario,
we will hit assert error but we actually meet stack overrun first due to just
0x400 bytes for emitting error message. The issue doesn’t occur on other
targets such as M487 because it has 8 mpu regions.
2019-09-27 17:45:52 +08:00
36278618ad
Support Nuvoton's NUMAKER_M252KG target
2019-09-27 17:45:52 +08:00
fff88617b7
STM32H7 ST CUBE V1.5.0 update
2019-09-27 11:39:06 +02:00
fff888b118
Merge pull request #11562 from VVESTM/vve_h7_memmap
...
STM32H7: memory relocation
2019-09-26 14:01:23 +02:00
698e75f336
Merge pull request #11529 from vmedcy/pr/psoc6pdl-1.3.1
...
PSOC6: update to PDL 1.3.1
2019-09-26 12:24:06 +02:00
eb6a474ba8
EP_AGORA: Add config logic to enable BLE, cell, and LoRa by default
2019-09-25 12:28:04 -04:00
1b21612afd
Add target for CY8CPROTO-063-BLE
2019-09-24 11:25:12 -07:00
d199fa6bb4
PSOC6: update to PDL 1.3.1.1499
2019-09-24 17:43:23 +03:00
65d5c72cbd
Merge pull request #11404 from lrusinowicz/interrupt_in_fix
...
FUTURE_SEQUANA: InterruptIn implementation bug fix
2019-09-24 13:20:39 +02:00
f513bce4a3
Merge pull request #11480 from gpsimenos/gp-enable-tickless-stage2
...
Enable tickless mode in additional tested targets
2019-09-23 11:42:58 +02:00
1f5a124820
Merge pull request #11117 from Terstegge/target_msp432_support
...
Target msp432 support
2019-09-20 15:02:35 +02:00
bb1338d07d
Merge pull request #11525 from jeromecoutant/PR_LSI
...
STM32WB/STM32H7 : LSI selection when LSE is not available
2019-09-20 14:19:58 +02:00
c225f8f1e7
Merge pull request #11516 from kyle-cypress/pr/hal-update
...
Update to latest psoc6csp
2019-09-20 14:18:13 +02:00
77dd6f02a0
Merge pull request #11463 from gpsimenos/gp-enable-tickless-stage1
...
Enable tickless mode in MAX32630FTHR
2019-09-20 14:13:32 +02:00
6790e64bd8
Merge pull request #11347 from woodsking2/master
...
Fix NRF52832 softdevice memory map
2019-09-20 14:09:42 +02:00
876b643a9d
remove NRF52840, NRF52832 static_memory_defines set
...
static_memory_defines controls the macro MBED_RAM_START AND MBED_RAM_SIZE
when nrf52840 to use softdevice, it need MBED_RAM_START to set the true application ram start
default static_memory_defines is true, so just remove NRF52840 and NRF52832's set
2019-09-20 11:34:35 +08:00
f0fdee4a1c
Clean up BSP hardware configuration
...
- Improve block naming
- Remove unneeded items
2019-09-19 12:05:25 -07:00
2831dfde1c
Update CY8CPROTO-064-SB linker scripts
...
Update linker scripts for the latest PDL to be consistent with other Cypress targets
2019-09-19 12:03:32 -07:00
09182d1ed0
Refactor serial flash support
2019-09-19 12:01:29 -07:00
70590006cb
Simplify BSP contents
...
Remove some (Cypress-proprietary) BSP interfaces and hardware initialization
from the BSPs which is better implemented by a library or application firmware.
Move some remaining functionality from common to the individual targets.
2019-09-19 12:00:13 -07:00
4ec3ad1850
Consolidate/clean up wifi initialization
2019-09-19 11:51:15 -07:00
d067952b6f
Avoid doubly allocating whd thread stack
...
Don't malloc during wifi initialization, as that could cause double allocation in some cases.
The thread stack will be allocated by cy_rtos_thread_start if necessary.
2019-09-19 11:05:05 -07:00
f1a8b04769
Enable tickless mode on tested targets ARCH_PRO, NUCLEO_F401RE, NUCLEO_F411RE, UBLOX_EVK_ODIN_W2
2019-09-19 13:25:05 +01:00
8c1f94f7cb
STM32WB : LSI clock selection when LSE is not available
2019-09-19 13:07:54 +02:00
5cfee65881
STM32H7: LSI clock selection when LSE is not available
2019-09-19 13:07:54 +02:00
2af2105aeb
PSOC6: update to PDL 1.3.1.1474
2019-09-19 10:40:44 +01:00
8aa449c662
Improve psoc6csp doxygen comments
2019-09-18 12:13:34 -07:00
a0b657295f
Reorganize resource and rtos abstraction files
...
- Move resource and rtos abstractions into their own folders
- Remove files for abstractions that are not implemented
2019-09-18 12:10:07 -07:00
e8dc5f111c
Update to latest HAL
...
- Add const and static qualifiers in places where they are
applicable but missing
- Remove headers for drivers that aren't implemented yet
- Misc minor bugfixes
2019-09-18 12:07:08 -07:00
1713e79ccf
Fix incorrect integer division in analogout_read
...
Replace with multiplication by the floating point reciprocal, to
produce a floating point result while being more efficient than
floating point division.
Addresses the issue raised by kjbracey-arm in
https://github.com/ARMmbed/mbed-os/pull/11324#pullrequestreview-282433989
2019-09-18 12:06:33 -07:00
83fca603f0
Merge pull request #11454 from Tharazi97/LSI_VALUE_STM
...
ST: Change the LSI_VALUE according to documentation
2019-09-18 13:49:38 +02:00
82e89add61
STM32H7 : use RAM instead of DTCMRAM (GCC_ARM toolchain)
2019-09-18 10:57:21 +02:00
ac30a70092
STM32H7 : use RAM instead of DTCMRAM (ARM toolchain)
2019-09-18 10:57:20 +02:00
d241eef5d4
STM32H7 : use RAM instead of DTCMRAM (IAR toolchain)
...
Keep vector table and crash data ram in 0x20000000 for
tests-mbed_platform-crash_reporting test.
Move the rest in RAM (0x24000000). This is needed for ethernet and allows
user to use more RAM (512k).
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-09-18 10:57:19 +02:00
43e5532c50
Remove trailing whitespace
2019-09-17 14:49:38 +01:00
9673a45c93
Enable tickless in MAX32630FTHR
2019-09-17 14:49:38 +01:00
ffbd92c5a9
Merge pull request #11288 from OpenNuvoton/nuvoton_m2351_comb-sec-nonsec
...
M2351: Enhance secure/non-secure image build flow for non-PSA target
2019-09-17 12:18:16 +02:00
48040cf687
Change the LSI_VALUE according to documentation
2019-09-17 12:01:32 +02:00
1780a08d54
Add OKDO platform ( #11407 )
...
Add OKDO platform
2019-09-16 16:58:54 +02:00
f51bbe01c8
Merge pull request #11471 from jeromecoutant/PR_WB_ADC
...
STM32WB ADC : consecutive VBAT reading
2019-09-16 13:19:09 +02:00
85bb65cd56
M2351: Add pre-built secure image for non-PSA
2019-09-16 11:01:34 +08:00
b98360ed20
M2351: Enable USB UART for non-PSA secure target for Greentea
...
NOTE1: USB UART is partitioned for non-secure world. Secure world still can share
it with limit that its interrupt cannot use in secure world.
NOTE2: In secure world, USB UART is only for Greentea and STDIO. Developers shouldn't
use it for other purposes.
2019-09-16 10:38:52 +08:00
e9e85f5307
M2351: Support non-PSA secure/non-secure combined build
...
Support secure/non-secure combined build for non-PSA target:
1. In secure post-build, deliver built secure image to TARGET_NU_PREBUILD_SECURE
directory which is to combine later.
2. In non-secure post-build, merge non-secure image with secure image saved in
TARGET_NU_PREBUILD_SECURE directory.
3. In non-secure post-build, user can also drop pre-built secure image saved in
TARGET_NU_PREBUILD_SECURE directory and provide its own by adding the line below
in mbed_app.json:
"target.extra_labels_remove": ["NU_PREBUILD_SECURE"]
2019-09-16 10:37:08 +08:00
c025e33fec
M2351: Rename non-PSA target name to NU_PFM_M2351_NPSA_S/NS
...
1. Create a private target name NU_PFM_M2351_CM which stands for the
NuMaker-PFM-M2351 board and is to be extended.
2. NU_PFM_M2351_NPSA_S/NS target names for non-PSA secure/non-secure targets
respectively.
3. The original target name NUMAKER_PFM_M2351 is recycled and cannot be used.
Use NU_PFM_M2351_S/NS for non-PSA secure/non-secure targets instead.
NOTE: Target name doesn't follow the rule below because online database has
limit of max 20 chars:
NUMAKER_PFM_M2351_PSA/NOPSA_S/NS
Instead, it has the rule:
NU_PFM_M2351_[NPSA_]S/NS
NU_PFM_M2351_S/NS for PSA targets. This is to be consistent with current
PSA target naming. So the resolved target names are:
NU_PFM_M2351_S : PSA secure target
NU_PFM_M2351_NS : PSA non-secure target
NU_PFM_M2351_NPSA_S : Non-PSA secure target
NU_PFM_M2351_NPSA_NS : Non-PSA non-secure target
2019-09-16 10:22:23 +08:00
2471c9ea10
M2351: Remove pre-built non-PSA secure image temporarily
...
This will add back immediately after target renaming is done.
2019-09-16 10:20:30 +08:00
ee8489f4e9
STM32WB ADC : Consecutive VBAT values reading was not possible
...
Add Stop after read
2019-09-12 12:55:41 +02:00
9fc299a1cc
Updated mbedTLS CRYPTO target to be more flexibly configured for supported boards
2019-09-12 01:30:54 +02:00
c897e041c8
Merge pull request #11384 from jeromecoutant/PR_H747_CM7
...
ST DISCO-H747I introduction
2019-09-10 19:43:57 +02:00
4ea7768514
Merge pull request #11443 from michalpasztamobica/k66f_enable_dma
...
Enable asynchronous serial with DMA for K66F
2019-09-10 19:27:40 +02:00
db7efabfd5
STM license file update
...
Some code have been copied from ST Cube deliveries.
ST copyright is then needed.
2019-09-10 14:24:48 +02:00
535dbe87af
STM32H747 license update
2019-09-10 11:46:52 +02:00
fb3f0f904e
Remove "STM32H747ZI" device_name, as not supported yet by MBED
2019-09-10 11:46:50 +02:00
c28d5f17e5
DISCO_H747I single core M7 introduction
2019-09-10 11:46:50 +02:00
73a00e953d
STM32H747xI introduction
2019-09-10 11:46:47 +02:00
117ddbadee
STM32H743 files move
2019-09-10 11:46:35 +02:00
551bc8a1f5
Enable async serial for K66F
...
Added DMA definitions and usage for UART, based on K64F's code.
2019-09-09 18:43:43 +03:00
458523219a
Merge pull request #11006 from linlingao/pr10692
...
Introduce an Mbed config to enable XIP
2019-09-09 11:09:21 +02:00
f35e16ebea
Merge pull request #11412 from NXPmicro/Kinetis_Update_To_Fix_Tickless
...
Kinetis update to fix tickless
2019-09-09 10:35:44 +02:00
021c67e3eb
Merge pull request #11418 from 0xc0170/fix_nrf52
...
NRF52: fix config
2019-09-06 10:42:29 +02:00
31da8ff09f
MCUXpresso: Update the MXRT Serial driver for MBED_TICKLESS
...
We should not block in case the UART is busy transmitting. The
API has been updated to check the status of all UART's and return
1 in case any of them is busy transmitting.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-09-05 14:16:10 -05:00
b30e294ba1
MCUXpresso: Change the MXRT deep sleep implementation
...
The code checks if any of the UART's is still transmitting.
If so then prevent from entering deepsleep
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-09-05 14:16:09 -05:00
e65012e549
MCUXpresso: Update the Kinetis Serial driver for MBED_TICKLESS
...
We should not block in case the UART is busy transmitting. The
API has been updated to check the status of all UART's and return
1 in case any of them is busy transmitting.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-09-05 13:58:59 -05:00
6eca8d2e2e
MCUXpresso: Change the Kinetis deep sleep implementation
...
The code checks if any of the UART's is still transmitting.
If so then prevent from entering deepsleep
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-09-05 13:58:58 -05:00
f06145db13
Merge pull request #11376 from kyle-cypress/pr/pdl-1.3-doc
...
Update PDL documentation and metadata
2019-09-05 13:30:28 +02:00
6c0144eb21
nrf52: fix removing additional config - was not there
2019-09-05 11:38:22 +01:00
530f1e9a24
NRF52: fix config
...
remove lib config and use target configuration instead. To avoid duplication of symbols, etc.
Fixes #10655
2019-09-05 11:02:05 +01:00
b8ebee5719
Merge pull request #11385 from Tharazi97/lp_ticker_wrapper_change
...
Fix problem with low level lp_ticker STM wrapper
2019-09-05 11:09:50 +02:00
f0234268f5
Merge pull request #11046 from kotkcy/pr/cy_mbedtls_alt
...
Initial implementation of Cypress Crypto hardware acceleration for mbedTLS
2019-09-05 09:43:06 +02:00
ea54f126a5
Merge pull request #11379 from OpenNuvoton/nuvoton_m263_fpga-ci
...
M263: Fix FPGA CI testing failing
2019-09-04 14:06:19 +02:00
7b06ce552f
Merge pull request #11368 from ua1arn/master
...
Add pin speed controlling interface
2019-09-04 13:55:26 +02:00
753917d476
Merge pull request #11380 from OpenNuvoton/nuvoton_m263_lpticker-delay-ticks
...
M263: Enlarge LPTICKER_DELAY_TICKS for safe
2019-09-04 13:51:49 +02:00
5a6bf446d2
Merge pull request #11383 from Tharazi97/f303_watchdog_reset
...
Change LSI_VALUE in STM implementation.
2019-09-04 11:55:27 +02:00
9e0e00d6cd
Merge pull request #11381 from OpenNuvoton/nuvoton_m263_wakeup-latency
...
M263: Enlarge required deep sleep latency
2019-09-04 11:55:06 +02:00
9a1ffdd9d2
Merge pull request #11330 from tung7970/fix-ameba
...
RTL8195AM - resuscitate AMEBA GCC/ARMCC support
2019-09-04 11:53:56 +02:00
d4746dd9f9
Removed mbedTLS hardware support from FUTURE_SEQUANA targets
2019-09-04 12:28:20 +03:00
67c6bdbf2d
removed xip unrelated changes
2019-09-03 16:14:38 -05:00
f1813e5bcc
Remove keep keyword for .heap section
2019-09-03 13:22:47 -05:00
b9f8e2ac53
Remove QSPI for Future targets
2019-09-03 13:22:43 -05:00
2a78a9ba13
Refactored code to not use macro. Created config xip-enable
2019-09-03 11:54:14 -05:00
ea032bebc4
Add XIP capability, enable QSPI. XIP can be enable by adding macro XIP_ENABLE in mbed_app.json. It's disabled by default.
2019-09-03 11:54:11 -05:00
55d60f3c25
Add USB support for DISCO_L4R9I
2019-09-03 16:43:05 +02:00
fb8b503b1c
STM32 targets: USBDEVICE support
2019-09-03 14:24:34 +02:00
425d63856c
STM32L4 USB: remove EndpointAbort support
2019-09-03 14:23:05 +02:00
7d540cd61a
FUTURE_SEQUANA: InterruptIn implementation bug fix
...
Fixed HAL API implementation for InterruptIn:
- Interrupt was not enabled by default after configuration as it should be.
- Interrupt-to-object linking was not handled properly.
2019-09-03 13:48:53 +02:00
e16394cf09
Final source code cleanup. Smaller changes in system_msp432p401r.c
2019-09-03 11:19:32 +02:00
8853453ce3
First version of MSP432 support for mbed OS
...
Removed private TODO file.
Fixed cmsis.h so that renaming of CS and DIR_H is not necessary any more.
Leave pinmap.h unchanged although it should include stdint.h
Moved stdint.h to PinNames.h instead, where it is also used.
Reworked system startup (clock configuration) to be more flexible
(different clock sources for MCLK and SMCLK, configurable clock dividers).
Fixed Copyright headers
Changed default clock settings for MSP432 Launchpad to
MCLK 48 MHz (HFXT) and SMCLK 24 MHz (HFXT)
Remove mbed_rtx.h
Added common mbed_rtx.h file (merge with lastest master)
Added support for IAR toolchain
Fixed some astyle problems.
Added support for ARM C5/C6 toolchains
Small changes to us_ticker implementation after port testing.
Changed default clock configuration to DCO (MCLK 48MHz, SMCLK 24MHz).
De-configured the LFXT crysal, because this made the system_reset() test to time out.
Removed MPU from device_has list. Changed clock source to HFXT.
Reworked startup_msp432p401r.c -> now only one startup file for all compilers.
Changed all linker scripts to delete VECTORS stuff (not needed).
Moved position of MSP432 in targets.json so TI stuff is in one block.
2019-09-03 11:19:31 +02:00
afc79cf9b7
formatting
2019-09-03 12:03:04 +03:00
2a13490e6d
bad formatting correction
2019-09-03 11:47:52 +03:00
a684f43b7f
indents correction
2019-09-03 11:45:35 +03:00
e001216b55
Merge pull request #11315 from Patater/psa-crypto-api-1.0b3
...
Update Mbed OS for PSA Crypto API 1.0b3
2019-09-03 09:20:15 +02:00
a848cd6987
psa: Update LPC55S69 and MUSCA_A1 TF-M binaries
...
Rebuild the TF-M binaries for the LPC55S69 and MUSCA_A1 using the latest
service updates. This allows the boards to use the PSA Crypto API 1.0b3.
2019-09-02 17:11:00 +01:00
7cbfa84625
Initial commit to add mbedTLS hardware acceleration for Cypress chips to mbed-os sources
2019-09-02 15:20:11 +03:00
1379009f5e
rename macro
2019-09-02 14:02:29 +03:00
940d3fdf60
Merge pull request #11291 from LMESTM/STM32_OSPI_QSPI_fallback_support
...
Stm32 ospi qspi fallback support
2019-09-02 12:26:55 +02:00
8add87aeba
ST pinmap: remove endif mistype
2019-09-02 10:33:20 +01:00
b44fbfe714
ST pinmap: Fix the style
2019-09-02 10:32:32 +01:00
58ca13006d
formatting
2019-09-02 12:08:07 +03:00
a95450bdc0
AStyle
2019-09-02 10:48:41 +02:00
16c5121705
Fix problem with low level lp_ticker STM wrapper
2019-09-02 10:48:40 +02:00
9043330af4
fix mistypes
2019-09-02 10:21:38 +03:00
05fc0f5263
formatting issue
2019-09-02 10:17:54 +03:00
75c17cea90
mistype fix
2019-09-02 10:08:36 +03:00
b140b7011a
Update PDL to latest 1.3 build
...
Updates to documentation and personalities. No functional code changes.
2019-08-30 08:35:39 -07:00
9780c9018e
Disabled QSPI for now
2019-08-30 16:00:09 +03:00
c249bf97c2
Updated target files structure to align with the following BSP PR.
2019-08-30 15:10:19 +03:00
515555e7ba
Removed scripts for provisiongs from repository, made fixes per PR comments, adjusted Readme.md
2019-08-30 15:10:19 +03:00
74e873a045
Updated README.md
2019-08-30 15:10:19 +03:00
74c5ea6517
Updated BSD license file content.
2019-08-30 15:10:19 +03:00
7e8d569261
Added example x.509 certificate for provisioning.
2019-08-30 15:10:19 +03:00
b8639a00ec
Updated CyBootloader hexes.
2019-08-30 15:10:19 +03:00
9d4a697207
Updated linker scripts and startup file for ARM - fixes tests-mbedmicro-rtos-mbed-heap_and_stack failure on ARM compiler.
2019-08-30 15:10:19 +03:00
4db392c2f6
Updated licenses in files, mentioned in commnets to https://github.com/ARMmbed/mbed-os/pull/11046
2019-08-30 15:10:18 +03:00
b15d54f5bf
Fixed IAR linker script.
2019-08-30 15:10:18 +03:00
ed9995e06c
PSOC6_SB: Initial commit to add CY8CPROTO_064_SB to mbed-os sources.
2019-08-30 15:10:18 +03:00
3fa878f8a8
Change LSI_VALUE in STM implementation.
...
Wrong LSI value might be causing problems witch watchdogs.
2019-08-30 13:54:39 +02:00
1c32e3ca5a
Merge pull request #11353 from kyle-cypress/pr/psoc-reserved-resources
...
Add reserved resources metadata to Cypress BSPs
2019-08-30 12:47:42 +02:00
335f3ad7ea
Merge pull request #11355 from kyle-cypress/pr/psoc-serial-flash
...
Initial support for Serial Flash on PSoC Devices
2019-08-30 12:42:59 +02:00
68054861e8
Merge pull request #11354 from kyle-cypress/pr/pdl-linker-script
...
Update linker scripts based on latest PDL 1.3
2019-08-30 07:10:32 +02:00
254866eac1
M263: Remove redundant SPI I2S pins from pinmap
...
The pins suffixed with 'I2SMCLK' are for SPI I2S and cannot be used in normal SPI.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi.
2019-08-30 11:33:56 +08:00
c67a0d8bd0
M263: Free up peripheral pins in peripheral free-up HAL API
...
Without free-up of peripheral pins, peripheral pins of the same peripheral may
share by multiple ports after port iteration, and this peripheral may fail with
pin interference.
2019-08-30 11:33:55 +08:00
78ae1e0c73
M263: Support GPIO input pull-high/pull-low
...
In Nuvoton, only new-design chips support GPIO input pull-high/pull-low modes.
Targets not supporting this feature are listed below:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
2019-08-30 11:33:54 +08:00
5b7beab9da
M263: Fix redundant call to UART IRQ handler
...
Honor RxIrq/TxIrq to avoid redundant call to UART IRQ handler.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-uart.
2019-08-30 11:33:52 +08:00
eb435b7da0
M263: Fix redundant SPI clock generation
...
Fix SPI clocks are generated redundantly at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - async mode.
2019-08-30 11:33:51 +08:00
d15abe5171
M263: Fix I2C NACK error
...
Fix logic error on replying NACK at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-i2c/
i2c - test single byte read i2c API.
2019-08-30 11:33:49 +08:00
9d4d99cf34
M263: Fix IP initialization sequence
...
Better IP initialization sequence:
1. Configure IP pins
2. Select IP clock source and then enable it
3. Reset the IP (SYS_ResetModule)
NOTE1: IP reset takes effect regardless of IP clock. So it doesn't matter if
IP clock enable is before IP reset.
NOTE2: Non-configured pins may disturb IP's state, so IP pinout first and then
IP reset.
NOTE3: IP reset at the end of IP initialization sequence can cover unexpected
situation.
2019-08-30 11:33:48 +08:00
9aa69d03bf
M263: Exclude USB UART from testing
...
USB UART is dedicated to USB COM and so must exclude from FPGA CI testing.
2019-08-30 11:33:47 +08:00
3cb95a8baf
M263: Force enum PinName to 32-bit
...
NU_PINNAME_BIND(...) requires enum PinName to be 32-bit to encode module
binding information in it.
2019-08-30 11:33:45 +08:00
d373cab5ab
Initialize serial flash on device startup
2019-08-29 14:09:21 -07:00
ee944cf850
Add serial flash implementation for PSoC 6
2019-08-29 14:08:56 -07:00
a65ed8c3d8
Merge pull request #11303 from jeromecoutant/PR_H743ZI2_480
...
NUCLEO_H743ZI2 : increase system clock from 400 MHz to 480 MHz
2019-08-29 17:10:06 +02:00
bf00ebe409
Remove rom start/size macros when bootloader=true
...
Allow the application to specify this depending on whether/how
it is using the bootloader and whether it requires a CM0+ image.
2019-08-29 07:15:56 -07:00
aaf641062c
Update linker scripts based on latest PDL 1.3
2019-08-29 07:15:56 -07:00
bb1388be8e
NUCLEO_L4R5ZI: add QSPI_x definition
2019-08-29 14:17:33 +02:00
8ef742a49c
Merge pull request #11370 from u-blox/ublox_odin_driver_os_5_v3.7.1_rc1
...
Driver Updates + ARMC6 driver support + WIFI fixes
2019-08-29 13:35:06 +02:00
f13072490c
NUCLEO_L4R5ZI : add OSPI pins for QSPI
2019-08-29 12:11:28 +02:00
7504cf835f
M263: Fix mbedmicro-rtos-mbed-systimer/Wake up from deep sleep failing
...
This test requires total latency (tot = h/w + s/w) (wakeup from deepsleep) be
under 1ms. To check the issue, measure total latency on Nuvoton targets:
TARGET EXP(us) EXP+TOL(us) ACT(us)
NANO130 42000 43000 42939
NUC472 42000 43000 42236
M453 42000 43000 43274
M487 42000 43000 42877
M2351 42000 43000 43213
Checking h/w spec, h/w latency (wakeup time from normal power-down mode) on
M487/M2351 is just 1us (n/a on other targets). S/W latency plays the major
part here.
S/W latency relies on system performance. On Nuvoton targets, 'LPTICKER_DELAY_TICKS'
possibly complicates the test. Anyway, to pass the test, add extra 1ms latency
(deep-sleep-latency) in targets.json for Nuvoton targets.
2019-08-29 18:08:12 +08:00
2a48f54c1d
M263: Enlarge LPTICKER_DELAY_TICKS for safe
...
On Nuvoton targets, lp_ticker_set_interrupt(...) needs around 3 lp-ticker
ticks to take effect. It may miss when current tick and match tick are very
close (see hal/LowPowerTickerWrapper.cpp). Enlarge LPTICKER_DELAY_TICKS to
4 from 3 to address this boundary case.
2019-08-29 18:00:45 +08:00
8401c2ea31
STM32: Few fixes and tidy-up in qspi_api
2019-08-29 11:17:46 +02:00
be78084a8b
NUCLEO_H743ZI and NUCLEO_H743ZI2: clock configuration cleanup
2019-08-29 10:52:24 +02:00
453122944c
Merge pull request #11366 from 0xc0170/dev_rollup
...
Rollup part 2 for 5.14
2019-08-29 09:28:49 +02:00
27571bc2d7
Merge pull request #11309 from NXPmicro/Fix_Kinetis_Spi
...
MCUXpresso Kinetis SPI drive: Add a delay between CS assertion and first sclk edge
2019-08-29 08:49:49 +02:00
7f36fbc86e
Driver Updates + ARMC6 driver support + wifi fixes
2019-08-29 11:33:29 +05:00
095e8dfbd9
Remove WATCHDOG from TARGET_SEQUANA
...
This was added to TARGET_PSOC6 which TARGET_SEQUANA inherits from,
but TARGET_SEQUANA doesn't implement WATCHDOG
2019-08-28 18:06:02 -07:00
605fdd13de
Add pin speed controlling interface
2019-08-28 22:17:45 +03:00
3898fed709
Update targets for Cypress Kits
...
Enable QSPI and Watchdog
Define additional macros to enable more generic BSP code
Allow deep sleep latency to be set by configurator-generated code
2019-08-28 10:56:15 -07:00
13f216d23d
Fix LPA pin configuration for two Cypress Targets
...
Fixes are for CY8CKIT_062S2_43012 and CY8CPROTO_062_4343W
2019-08-28 10:56:15 -07:00
e8f325fe33
Update device startup code and linker scripts
...
Only include the CM4 startup code and linker scripts with the target for each board.
2019-08-28 10:56:15 -07:00
8c2dec1233
Update board hardware configuration
...
Include all configurator design files with each BSP
2019-08-28 10:56:15 -07:00
166325ac37
Move nested targets up one level
...
For kit targets that inherit from a module, move the kit a top-level
target folder rather than nesting underneath the module folder, to
avoid too-long-path issues on Windows.
Note this only changes the folder layout, not the inheritance.
2019-08-28 10:56:14 -07:00
317f720b11
Move BSP design.modus/GenSrc into its own component
...
Enables code examples/end user applications to override if necessary
Add BSP_DESIGN_MODUS component by default to all PSOC6 boards. Applications can remove this if necessary.
2019-08-28 10:56:14 -07:00
236bf2c0c3
Initialize timer for us_ticker at startup
...
This avoids a stack overflow if sleep is called for the first time from
the idle thread (which by default has a fairly small stack, and which is
already fairly deep by the time it calls into the usticker adapter)
2019-08-28 10:56:14 -07:00
ad6e833450
Enable SDIO DeepSleep Callback
2019-08-28 10:56:14 -07:00
0164ddcc80
Minor updates to BSP init for clarity
2019-08-28 10:56:14 -07:00
85dd8d704b
Clean up unnecessary doxygen comments
...
Fix incorrect file names in a few headers
2019-08-28 10:56:14 -07:00
d50145fd1d
Comment about resource reservations in BSP Init
2019-08-28 10:56:14 -07:00
0a1e64dd00
Register Sysclk PM callback in BSP Init
2019-08-28 10:56:14 -07:00
ced234607e
Clean up common BSP implementation
2019-08-28 10:56:14 -07:00
e64fdba7fc
Update BSP and WifiInterface for WHD Changes
2019-08-28 10:56:14 -07:00
5d819ebc81
Initialize wifi SDIO during BSP init
2019-08-28 10:56:14 -07:00
d98fa7a569
Rename BSP header for easier moves between targets
2019-08-28 10:56:14 -07:00
96d9a8fea9
Merge branch 'MX25LM51245G_QSPI_test_config' of git://github.com/LMESTM/mbed into dev_rollup
2019-08-28 18:37:17 +01:00
104f9281c4
Merge branch 'I2C_SEQUENTIAL_COMMUNICATION_REWORK' of git://github.com/ABOSTM/mbed-os into dev_rollup
2019-08-28 18:36:53 +01:00
31b65adf45
Merge branch 'master' of git://github.com/malavikasajikumar/mbed-os into dev_rollup
2019-08-28 18:36:40 +01:00
7eb97be5a3
Merge pull request #11358 from 0xc0170/dev_rollup
...
Rollup PRs for 5.14
2019-08-28 16:39:36 +02:00
67d1bb180b
Merge pull request #11319 from kyle-cypress/pr/whd-1.30-update
...
Update WHD to 1.30.0
2019-08-28 16:11:24 +02:00
7063ccee9e
Add PA6 to ADC PeripheralPins for MTS_DRAGONFLY_L471QG
2019-08-28 13:12:08 +01:00
695e930f09
KL43Z: Enable USBDevice
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-28 13:12:04 +01:00
4d5bf75ae6
Fix ELMO_F411RE detect code
2019-08-28 13:12:03 +01:00
2cfea4faba
target TT_: fix compilation errors
...
They define slave for spi, rtc but do not contain implementation - removing them.
Fixes #11143
2019-08-28 13:12:03 +01:00
ae247b5645
Merge pull request #11326 from kyle-cypress/pr/psoc6-pdl
...
Update PDL for Cypress Targets
2019-08-28 12:30:37 +02:00
d7b5f759ae
Merge pull request #11324 from kyle-cypress/pr/psoc6-csp
...
PSOC6: Update CSP to latest
2019-08-28 10:07:44 +02:00
7e0fb8fab9
Merge pull request #11293 from NXPmicro/K82F_Add_USBDevice
...
K82F: Add USBDEVICE support
2019-08-28 07:27:40 +02:00
c611e76297
Update WHD to latest 1.30 build
2019-08-27 17:16:44 -07:00
ac3951097f
Update PDL to 1.3.0 final
2019-08-27 16:13:07 -07:00
5c899a3350
Bug fixes to interrupt/event handling in SDHC HAL
2019-08-27 15:29:32 -07:00
db0d3d21e6
Updating SDP-K1 PinNames.h file.
...
- Removing LED pin definitions based on color.
- Removing and updating incorrect USB pin definitions.
- Adding comments for Arduino SPI and I2C pins.
2019-08-27 15:24:08 -07:00
8ad377add3
Fix I2C handling of 1 byte external memory address
2019-08-27 15:10:34 -07:00
459666f8f2
Fixed issue in QSPI when there aren't 8 pins
2019-08-27 15:10:34 -07:00
375221097c
Update CSP to latest
...
Update HAL adapter for interface changes
Misc minor fixes to HAL adapter
2019-08-27 15:10:34 -07:00
5e2234f3e3
Add reserved resources lists to Cypress BSPs
...
These provide information to allow Cypress graphical configuration tools
to avoid conflicting usage of hardware resources which are managed by
firware included with the BSP.
2019-08-27 11:35:23 -07:00
6d3d88f921
set NRF52832 static_memory_defines true
...
static_memory_defines controls the macro MBED_RAM_START AND MBED_RAM_SIZE
when nrf52832 to use softdevice, it need MBED_RAM_START to set the true application ram start
2019-08-27 19:50:01 +08:00
7e179f5beb
Merge pull request #11301 from jeromecoutant/PR_L4R
...
STM32L4+ : increase system clock from 80 MHz to 120 MHz
2019-08-27 09:49:09 +02:00
16e52f2868
rtl8195am - remove redundant code
...
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:41:34 +08:00
b170a90acf
rtl8195am - fix array assumed to have one element warning
...
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:41:32 +08:00
d52dd1941e
rtl8195am - fix argument format warning
...
[Warning] tcm_heap.c@70,18: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'MemChunk * {aka struct _MemChunk *}' [-Wformat=]
[Warning] tcm_heap.c@70,28: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'MemChunk * {aka struct _MemChunk *}' [-Wformat=]
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:41:29 +08:00
ec7a3dd0f3
rtl8195am - fix missing braces around empty body warning
...
osdep_service.c@214,61: suggest braces around empty body in an 'else' statement [-Wempty-body]
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:41:26 +08:00
885b4ccbef
rtl8195am - cleanup gcc linker script
...
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:40:51 +08:00
020cf85cf0
rtl8195am - disable IAR support
...
Disable IAR support until HAL library is upgraded to IAR8
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:40:23 +08:00
371d336fcd
rtl8195am - enable USTICKER support
...
Signed-off-by: Tony Wu <tonywu@realtek.com>
2019-08-27 10:40:19 +08:00
33493b12d9
Update WHD clients for interface changes
2019-08-26 16:05:47 -07:00
66cf10f030
Update WHD to 1.30.0
2019-08-26 16:05:46 -07:00
421ad37433
Merge pull request #11122 from OpenNuvoton/nuvoton_m263
...
Support Nuvoton's new target NUMAKER_IOT_M263A
2019-08-26 14:12:36 +02:00
de121a308a
Fix I2C issue with test mbed_hal_fpga_ci_test_shield
...
On last case #5 there was a last unexpected read.
It happened when stop condition was generated
2019-08-26 14:01:23 +02:00
02d1873c06
Merge pull request #11266 from u-blox/feature_adc_temp_conf
...
ADC internal temperature support and EMAC header fix
2019-08-26 11:08:47 +02:00
04aa0a6e9d
Update PDL
2019-08-23 17:58:41 -07:00
7910de2f38
TARGET_STM: Fix I2C sequential communication
...
Keep former behaviour for I2C V1.
For I2C V2:
Use only I2C_FIRST_FRAME, I2C_FIRST_AND_LAST_FRAME and I2C_LAST_FRAME,
thus we avoid using reload bit.
Reload suppose the next frame would be in the same direction,
but we have no guarranty about this. So we cannot use reload bit.
Note: in case of 2 consecutive I2C_FIRST_FRAME,
a restart is automatically generated only if there is direction change in the direction.
2019-08-23 16:26:19 +02:00
5a1a25abe0
Add MBED_FAULT_HANDLER_DISABLED into macros to avoid GCC issue
2019-08-23 21:53:01 +08:00
b786e68a6a
Merge pull request #11294 from NXPmicro/KL43_Add_Storage
...
KL43Z: Enable FALSHIAP storage
2019-08-23 15:43:19 +02:00
8cd00b3468
STM32L4: Add OSPI IP support in fallback QSPI mode
...
For STM32 platforms that embed an OSPI IP, we're offering
a QSPI fallback support with this commit.
When OSPI is supported in mbed, we can consider adding full
OSPI support
2019-08-23 15:18:48 +02:00
5af80db8b6
MCUXpresso Kinetis SPI drive: Add a delay between CS assertion and first sclk edge
...
1. FPGA test shield requires at least half sclk period delay between
CS assertion and first sclk edge
2. Update Kinetis SPI drivers to match what is already done for K64F
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-23 07:11:43 -05:00
1ab75d3759
adding internal ADC pin definition for MBED_CONNECT_ODIN and MBED_ODIN_W2
2019-08-23 15:46:15 +05:00
e57ed04252
modify acceptable license term of SDK drivres
2019-08-23 18:12:23 +08:00
23267ba229
re-license files of M261 device folder to be Apache
2019-08-23 18:12:19 +08:00
2b3fda91d3
Not disable MBED_FAULT_HANDLE by default after it supports Cortex-M23
2019-08-23 18:12:18 +08:00
9d653af2cc
re-license all of M261 hal files to be Apache
2019-08-23 18:12:16 +08:00
99e1d0b49c
M263 support GCC and IAR toolchain
2019-08-23 18:12:14 +08:00
c9006bd422
Support InterruptIn class in ci-test/pwm_rise_fall test case
2019-08-23 18:12:13 +08:00
d69e7c5613
Fix UNO pin map
2019-08-23 18:12:11 +08:00
3164095cd6
M263: Fix channel release in analogout_free()
2019-08-23 18:12:10 +08:00
a62c877d0e
M263: modify epwm-config-output
2019-08-23 18:12:09 +08:00
2596b7c7be
M263: Include cmsis core_m23.h for macro __CORTEX_M in M261.h
2019-08-23 18:12:07 +08:00
d52fced891
M263: Fix compile error on analogin/out & crypto-misc
2019-08-23 18:12:06 +08:00
b9a2e06a1a
M263: delete 2 redundant files
2019-08-23 18:12:04 +08:00
e46cf83850
M263: Add Numaker-IoT-M263A target board
2019-08-23 18:12:02 +08:00
3e4592703d
Create NUCLEO_H743ZI2 own target at 480 MHz
2019-08-23 10:33:08 +02:00
14021eb4fe
Merge pull request #11268 from NXPmicro/Update_MCUXpresso_SDK_SPI
...
Update MCUXpresso SDK SPI drivers
2019-08-23 10:20:09 +02:00
edc59ced82
Merge pull request #11215 from chrissnow/LPC1768_Scatter
...
LPC1768: Make use of the other 32K of RAM
2019-08-23 10:18:21 +02:00
48b5939b33
Merge pull request #11152 from OpenNuvoton/nuvoton_fpga-ci
...
Nuvoton: Fix FPGA CI test failing
2019-08-23 10:02:19 +02:00
b1aec797e2
Merge pull request #11282 from NXPmicro/K22_Add_Storage
...
K22F: Add FlashIAP for storage
2019-08-23 10:01:16 +02:00
6d736d8ce0
KL43Z: Enable FALSHIAP storage
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 12:16:09 -05:00
c249d5fd54
K82F: Add USBDEVICE support
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 11:17:35 -05:00
7455b89603
Merge pull request #11280 from Tharazi97/stm_spi_api_memset_fill_truncated
...
Tweak stm_spi_api Coverity warning.
2019-08-22 17:11:19 +01:00
a85f0824be
MCUXpresso: Update EDMA drivers to fix warnings
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 10:47:43 -05:00
a184a86e90
MCUXpresso: Update the SDK LPUART drivers
...
Use the latest driver from K66F
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 08:26:11 -05:00
bff287580c
MCUXpresso: Update I2C SDK driver
...
Use the K66F driver that has the latest
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 07:48:29 -05:00
23bf7b74b0
MCUXpresso: Update SDK EDMA driver
...
Update to the latest version from K66F
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 07:48:29 -05:00
382696fc50
MCUXpresso: Use SDK API for spi_master_block_write
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 07:48:28 -05:00
33b66ffa60
MCUXpresso: Update Kinetis SPI SDK drivers
...
Added dummy data setup API to allow users to configure
the dummy data to be transferred.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 07:48:28 -05:00
4102114a72
MCUXpresso: Update Kinetis DSPI SDK drivers
...
- Added dummy data setup API to allow users to configure
the dummy data to be transferred.
- Added new APIs for half-duplex transfer function. Users
can send and receive data by one API in the polling/interrupt/EDMA way,
and they can choose either to transmit first or to receive first.
Additionally, the PCS pin can be configured as assert status in
transmission (between transmit and receive) by setting the
isPcsAssertInTransfer to true.
- Fix for MISRA issues
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-22 07:48:28 -05:00
1182d1e9bb
Merge pull request #11284 from NXPmicro/K22_Add_USB_Support
...
K22: Add USBDEVICE support
2019-08-22 14:34:44 +02:00
680e0fc5fb
DISCO_L4R9I: increase system clock from 80MHz to 120MHz
2019-08-22 13:32:20 +02:00
bdd0689228
NUCLEO_L4R5ZI: increase system clock from 80MHz to 120MHz
2019-08-22 13:21:28 +02:00
32e97e3371
Merge pull request #11267 from NXPmicro/LPC_Optimize_usticker
...
NXP MCUXpresso: optimize us_ticker for LPC platforms
2019-08-22 11:18:09 +02:00
9d6bfcfc78
Merge pull request #11261 from NXPmicro/Enable_Tickless_LPC
...
MCUXpresso: Add TICKLESS support for LPC platforms
2019-08-22 11:06:00 +02:00
7647b39adc
TARGET_STM: I2C sequential communication revert PR #3324 to original cube HAL
2019-08-22 10:44:20 +02:00
edcde1ce8c
Merge pull request #10796 from NXPmicro/tickless
...
NXP: Enable MBED_TICKLESS on various NXP platforms
2019-08-22 10:30:14 +02:00
d0c917cb32
Merge pull request #11274 from VVESTM/vve_eth_h7
...
Add ethernet support on NUCLEO_H743ZI board
2019-08-22 09:42:45 +02:00
20aa1ecfd9
K22F: Add FlashIAP for storage
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-21 12:10:00 -05:00
5c9daa3941
Tweak stm_spi_api Coverity issue.
...
Coverity warining: "memset fill truncated (NO_EFFECT)".
Changed SPI_FILL_WORD to SPI_FILL_CHAR.
2019-08-21 16:47:35 +02:00
8ab6aecbe9
Move stm32xx_emac_config.h to family specific folder
...
This allows to specify which hal version to use for each family.
It can also be used to modify the thread stack size.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-08-21 15:02:45 +02:00
76fb4d22cc
STM32H7 : update linker script files to use right location for lwip_ram_heap
...
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-08-21 11:41:30 +02:00
9f2e9aa576
Add EMAC support for NUCLEO_H743ZI
...
This port is based on :
* CurryGuy ethernet branch :
https://github.com/CurryGuy/mbed-os/tree/feature-stm32h7-emac
* STM32 Cube example :
Applications/LwIP/LwIP_HTTP_Server_Netconn_RTOS example
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-08-21 11:40:48 +02:00
7e6da8bffe
K22: Add USBDEVICE support
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-20 15:15:46 -05:00
c8ad24c8f5
NXP MCUXpresso: optimize us_ticker for LPC platforms
...
Provide new optimizations for us_ticker and wait_us.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-20 10:39:28 -05:00
80e30f4258
ADc internal temperature suuport and EMAC header fix
2019-08-20 18:44:22 +05:00
ce74bb53c4
Merge pull request #11178 from Tharazi97/watchdog_max_timeout
...
ST: Watchdog: Fix timeout registers value calculation
2019-08-20 13:47:31 +02:00
c37b5628ec
Merge pull request #11255 from cy-vaira/nvram-cy8cmod-062s2-43012
...
Update NVRAM image for target CY8CMOD-062S2-43012
2019-08-20 10:27:30 +02:00
169ada9209
Merge pull request #11237 from Tharazi97/TT_M3HQ-build-problem
...
Fix TT_M3HQ build problem
2019-08-20 10:23:28 +02:00
191f029f73
Merge pull request #11226 from chrissnow/LPC1768_WDT
...
LPC1768 Watchdog & Reset Reason
2019-08-20 10:22:42 +02:00
e2fef54898
Merge pull request #11188 from NXPmicro/MXRT_TRNG
...
MIMXRT1050_EVK: Add TRNG support
2019-08-20 09:50:43 +02:00
e3bfcbc2ff
Merge pull request #11142 from hugueskamba/hk-usb-targets-relocation
...
Relocate USB target specific code to root `targets` directory
2019-08-20 09:39:30 +02:00
e56f3199eb
Merge pull request #11127 from NXPmicro/Fix_LPC55S69_AnalogIn
...
Fix ANALOGIN support for LPC55S69
2019-08-20 09:33:40 +02:00
b16aaca568
Merge pull request #11118 from ganesh-ramachandran/m46b_newfeatures
...
Add new features to Toshiba's TMPM46B
2019-08-20 09:27:28 +02:00
96dac4faa7
[M487] Exclude A2/A3 from testing for NuMaker-IoT-M487 V1.3
...
Since NuMaker-IoT-M487 V1.3, A2/A3 are dedicated to on-board ESP8266 WiFi
module RTS/CTS pins and so must exclude from FPGA CI testing.
2019-08-20 13:12:44 +08:00
c99c43cacd
[M2351] Fix pinmap table error with SPI clock pin
2019-08-20 13:12:44 +08:00
07f39f1337
[M2351] Fix CLK_SetModuleClock_S(...) error with SPI
...
Fix SPI module index error in modidx_ns_tab table in CLK_SetModuleClock_S().
Need to update secure image for this bugfix.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - init/free test all pins.
2019-08-20 13:12:44 +08:00
bab5d27e26
[M453] Classify by M45xD/M45xC and M45xG/M45xE
...
M451 series can classify by M45xD/M45xC and M45xG/M45xE. To support this
classification:
1. Create TARGET_M45xD_M45xC and TARGET_M45xG_M45xE targets.
2. Mark NUMAKER_PFM_M453 belongs to TARGET_M45xG_M45xE by 'extra_labels_add'
in targets.json.
3. Fix pin name table according to the classification.
4. Fix pinmap table according to the classification.
2019-08-20 13:12:43 +08:00
6f1bd325cd
[NANO130] Remove SPI MOSI1/MISO1 pins from pinmap
...
MOSI1/MISO1 are used in second bit of 2-bit transfer mode and cannot be used
for normal MOSI/MISO. Remove them from pinmap.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - basic test.
2019-08-20 13:12:43 +08:00
c3d7ef8341
[Nuvoton] Free up peripheral pins in peripheral free-up HAL API
...
Without free-up of peripheral pins, peripheral pins of the same peripheral may
share by multiple ports after port iteration, and this peripheral may fail with
pin interference.
2019-08-20 13:12:43 +08:00
ca0846b1e9
[Nuvoton] Support GPIO input pull-high/pull-low
...
In Nuvoton, only new-design chips support GPIO input pull-high/pull-low modes.
Targets not supporting this feature are listed below:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
2019-08-20 13:12:42 +08:00
09bf844d76
[Nuvoton] Fix redundant call to UART IRQ handler
...
Honor RxIrq/TxIrq to avoid redundant call to UART IRQ handler.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-uart.
2019-08-20 13:12:42 +08:00
d46c6fea47
[Nuvoton] Fix redundant SPI clock generation
...
Fix SPI clocks are generated redundantly at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - async mode.
2019-08-20 13:12:42 +08:00
80c21aeff5
[Nuvoton] Fix I2C NACK error
...
Fix logic error on replying NACK at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-i2c/
i2c - test single byte read i2c API.
2019-08-20 13:12:42 +08:00
fef138a3cd
[Nuvoton] Fix IP initialization sequence
...
Better IP initialization sequence:
1. Configure IP pins
2. Select IP clock source and then enable it
3. Reset the IP (SYS_ResetModule)
NOTE1: IP reset takes effect regardless of IP clock. So it doesn't matter if
IP clock enable is before IP reset.
NOTE2: Non-configured pins may disturb IP's state, so IP pinout first and then
IP reset.
NOTE3: IP reset at the end of IP initialization sequence can cover unexpected
situation.
2019-08-20 13:12:41 +08:00
560fe33ed8
[Nuvoton] Exclude USB UART from testing
...
USB UART is dedicated to USB COM and so must exclude from FPGA CI testing.
2019-08-20 13:12:41 +08:00
f88bd72c19
[Nuvoton] Force enum PinName to 32-bit
...
NU_PINNAME_BIND(...) requires enum PinName to be 32-bit to encode module
binding information in it.
2019-08-20 13:12:41 +08:00
99b1114e63
MCUXpresso: Add TICKLESS support for LPC platforms
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-19 13:15:39 -05:00
82f4be0b4d
SPDX identifier and license amended
2019-08-19 11:58:02 +01:00
101ae73b87
Merge pull request #11063 from linlingao/f_cc3220sf_launchxl
...
Add CC3220SF_Launchxl to Mbed OS
2019-08-19 12:08:11 +02:00
e7f190f2d7
Updated nvram image for target CY8CMOD-062S2-43012
2019-08-19 14:07:33 +05:30
3d6fb15b48
Use consistant naming for Cypress USB target files.
2019-08-16 15:42:43 +01:00
de231b8664
Move USB Templates to `mbed-os/hal/usb`
2019-08-16 15:42:43 +01:00
f3df1c1d1e
Relocate TARGET_MCU_NRF52840 to TARGET_NRF5x/TARGET_NRF52
2019-08-16 15:42:43 +01:00
41346bad13
Rename template dir so future templates can be added to the same dir.
2019-08-16 15:42:43 +01:00
5cbc3e0497
Relocate USB target specific code to root `targets` directory
...
All target specific source and header files should be in the `targets`
directory located at the root of the Mbed OS repository.
2019-08-16 15:42:43 +01:00
3c2ed16fce
Fix TT_M3HQ build problem with SPI
2019-08-16 14:55:49 +02:00
ce58505fa4
fix TT_M3HQ build problem with i2c
2019-08-16 14:55:49 +02:00
aa56f86cec
Remove SERIAL_FC from target.json on TT_M3HQ
...
Development board TT_M3HQ doesn't have CTS/RTS on its pinout.
If that is not the case PinMap_UART_RTS should be created.
2019-08-16 14:44:31 +02:00
edf36fb2ae
Added new features to TMPM46B
2019-08-16 10:43:52 +05:30
43b4c0ab82
MIMXRT1050_EVK: Add TRNG support
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-15 16:51:18 -05:00
08ecbfcd46
Merge pull request #11021 from OpenNuvoton/nuvoton_lpticker_delay_ticks
...
Nuvoton: Enlarge LPTICKER_DELAY_TICKS for safe
2019-08-15 12:47:55 +01:00
edc992b297
Enable WATCHDOG and RESET_REASON for other LPC1768 targets
2019-08-14 17:15:18 +01:00
cae7427717
Cosmetic changes to incorporate review feedback
2019-08-14 11:09:11 -05:00
7e2c2a98dd
LPC1768 Reset Reason implementation
2019-08-14 15:50:11 +01:00
2fcafb9c93
LPC1768 WDT implementation
2019-08-14 13:42:04 +01:00
a6c316afee
Merge pull request #11020 from OpenNuvoton/nuvoton_wakeup_latency
...
Nuvoton: Enlarge required deep sleep latency
2019-08-14 13:38:00 +02:00
df43350f28
Tweak STM watchdog implementation
...
Change the calculation method of rl so it is rounded up.
2019-08-14 13:02:47 +02:00
9825b0d915
remove CAN section form .ANY
2019-08-13 20:18:52 +01:00
f801a61138
Make use of the other 32K of RAM if not used by libraries, least priority is IRAM1 to help maximise heap availability.
...
Most beneficial when LWIP is not in use.
2019-08-13 13:41:18 +01:00
de84004be1
Merge pull request #11189 from LMESTM/pwmout_cpp_guard
...
__cplusplus guard fixed pwmout_device.h for STM32 families
2019-08-13 11:19:24 +02:00
be23d3c871
Merge pull request #11137 from facchinm/nano33ble_public
...
Add Arduino Nano 33 BLE target
2019-08-13 10:51:12 +02:00
9113c8d5d7
Merge pull request #11116 from nubix-io/issue-11115
...
Define I²C related pin names for the L-Tek FF_LPC546XX target
2019-08-13 10:42:49 +02:00
d68d8009d9
K64F: Update UART aynchronous API for tickless implementation
...
Do not allow entry to deep sleep mode when UART transfer is active
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-12 10:57:17 -05:00
72e1f415a9
K64F: Update SPI aynchronous API for tickless implementation
...
Do not allow entry to deep sleep mode when SPI transfer is active
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-12 10:57:14 -05:00
eaace297dc
MCUXpresso: Provide an API to wait till TX complete
...
Wait till the data is flushed out of TX buffer
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-12 10:57:04 -05:00
75608f6db2
MCUXpresso: Updated SMC SDK driver
...
Update includes allocating RAM region for code to enter
stop modes and execute this code in RAM, thus the flash
is idle and no prefetch is performed while entering stop
mode.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-12 10:56:56 -05:00
df64e32aa3
MCUXpresso: Update Kinetis Sleep implementation
...
1. Use the updated API's provided by the SMC driver
2. Wait till debug UART has finished transmitting data
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-12 10:56:52 -05:00
10bbbd1565
Fix ANALOGIN support for LPC55S69
...
1. Update to handle 12-bit resolution
2. Properly handle the pin configuration
3. Update the pin setup to handle the ADC B channel
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-09 09:18:04 -05:00
bed28681d5
NXP: Enable MBED_TICKLESS on various NXP platforms
...
Enable for K22F, K64F, K66F, K82F, KL82Z, KW24D, KW41Z, MIMXRT1050, HEXIWEAR
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-09 09:17:16 -05:00
f8dc035ae4
Merge pull request #11139 from sethitow/stm32f413-crash-capture
...
STM32F413 Crash Capture
2019-08-09 12:49:21 +01:00
174cac7e11
Merge pull request #11103 from desowin/stm32f7-usbhost
...
STM32F7: Do not generate redundant IN tokens
2019-08-09 11:36:37 +01:00
9b4373639b
Merge pull request #11072 from jeromecoutant/PULL_REQUEST_CUBE_UPDATE_L4_V1.14.0
...
STM32L4: update drivers version to CUBE V1.14.0
2019-08-09 11:35:00 +01:00
319223ac16
__cplusplus guard fixed pwmout_device.h for STM32 families
...
This bug prevented using this header in cpp code directly.
2019-08-09 09:51:39 +02:00
d27867ecd4
Merge pull request #11150 from byq77/patch-1
...
__cplusplus guard fixed pwmout_device.h for STM32F4
2019-08-09 08:41:12 +01:00
fd931a169d
Merge pull request #11168 from maciejbocianski/fix_qspi_write_k82f
...
Xpresso: qspi_write fix
2019-08-09 08:23:21 +01:00
bd0988416e
[TARGET] Add Arduino NANO33BLE
2019-08-08 17:24:56 +02:00
5f6379a55d
Merge pull request #11119 from Reda-RM/master
...
Riot Micro cellular device
2019-08-07 14:07:27 +03:00
f2599f43eb
Xpresso: qspi_write fix
...
Due to the data buffer is loaded in two steps the whole block needs protection from being interrupted
2019-08-06 14:55:29 +02:00
644f79592c
Merge pull request #11151 from kyle-cypress/pr/gpio-inout-fix
...
Fix PSoC 6 inout pins
2019-08-06 12:37:08 +03:00
6436f11335
Merge pull request #11123 from desmond-blue/fix-nrf52-us-ticker-free
...
NRF52 need to call TIMER_TASK_SHUTDOWN for current consumption
2019-08-06 11:33:55 +03:00
1c2b050cb0
Merge pull request #11138 from maclobdell/fix-cypress-mbed-rom-start
...
fix rom start & size for CY8CKIT_062_WIFI_BT & CY8CPROTO_062_4343W
2019-08-06 11:33:09 +03:00
1e4a837add
Merge pull request #11141 from maciejbocianski/i2c_Xpresso_byte_read_fix
...
freescale: fix i2c_byte_read function
2019-08-06 11:32:24 +03:00
fae1504e30
Merge pull request #11160 from OpenNuvoton/nuvoton_remove_delay_cycle_x4
...
Nuvoton: Remove dead code nu_delay_cycle_x4
2019-08-06 11:29:14 +03:00
ef1d9778a9
[Riot Micro] Add Riot Micro cellular module targets
2019-08-05 18:57:43 +02:00
f2236d26f8
Merge pull request #11131 from lrusinowicz/serial_free_fix
...
FUTURE_SEQUANA: Add missing serial_free() implementation
2019-08-05 15:41:45 +03:00
e69a7c913d
Merge pull request #11099 from trowbridgec/update-ep-agora-pinout
...
Update EP_AGORA target pinout
2019-08-05 12:00:08 +03:00
413d127586
Nuvoton: Remove dead code nu_delay_cycle_x4(...)
...
Originally, nu_delay_cycle_x4(...) is borrowed from mbed test code for delay
cycle. Currently, it is not used on Nuvoton targets. If delay cycle is needed,
use wait_ns(...) instead which has strict implementation and has passed tests.
2019-08-05 09:32:35 +08:00
9a65310a85
stm32f413xh: add crash capture support for ARM_STD
2019-08-01 11:28:36 -07:00
dd2876c8ac
__cplusplus guard fixed
...
This error prevented using this header in cpp code directly.
2019-08-01 14:41:11 +02:00
1c4ad895dd
stm32f413xh: add crash capture support for IAR
2019-07-31 15:54:47 -07:00
6278dacc1f
stm32f413xh: add crash capture support for ARM_MICRO
2019-07-31 15:54:20 -07:00
489bd3dec8
stm32f413xh: add crash capture support for GCC_ARM
2019-07-31 15:53:34 -07:00
33b06d4109
Fix inout pins not functioning correctly
...
Update the drive mode when setting the GPIO direction.
2019-07-31 11:51:04 -07:00
e201a5c6be
fix rom start & size for psoc6 targets for 5.13
2019-07-31 12:48:25 -05:00
b788541308
freescale: fix i2c_byte_read function
2019-07-31 19:44:23 +02:00
c36980c370
Fix a build break with ARM compiler
2019-07-31 11:51:20 -05:00
16372f3222
FUTURE_SEQUANA: Add missing serial_free() implementation
2019-07-31 13:28:31 +02:00
eebe00b9d1
Implement PWMOUT
2019-07-30 11:09:44 -05:00
7b5366f7a3
NRF52 need to call TIMER_TASK_SHUTDOWN for current consumption
2019-07-30 17:20:08 +08:00
417a9fe2fb
Merge pull request #11074 from fkjagodzinski/pinmap-gpio_irq
...
Add a gpio-irq pinmap
2019-07-29 17:44:55 +03:00
9affeb868d
Merge pull request #11071 from cypress-neil/pr/psoc6-usb
...
PSOC6: USB device implementation
2019-07-29 17:41:42 +03:00
d19c881a56
Define I²C related pin names for the L-Tek FF-LPC546XX target
2019-07-27 07:18:15 -07:00
04ca01d16f
Update PinNames.h with the pinout for EP_AGORA HW rev 1.1
2019-07-26 11:48:36 -04:00
844864066a
PSOC6_FUTURE: Fix circular dependency for GPIO-IRQ
...
The use of `gpio_irq_event` & `gpio_irq_handler` in `gpio_irq_s` creates
a circular dependency.
hal/gpio_irq_api.h needs
targets/TARGET_Cypress/TARGET_PSOC6_FUTURE/TARGET_CY8C63XX/device.h, that needs
targets/TARGET_Cypress/TARGET_PSOC6_FUTURE/objects.h, that again needs
hal/gpio_irq_api.h, before the types are defined.
Remove `#include "gpio_irq_api.h"` directive from objects.h and change
the types of `gpio_irq_s` members.
2019-07-25 11:04:16 +02:00
b9c4076741
STM32F7: Do not generate redundant IN tokens
...
When STM32F746-DISCO board was being used in (unsupported) USBHost mode,
the communication was unreliable. Our investigation revealed that the
problem lied in redundant IN tokens that the host generated even though
it shouldn't. This could lead to endless high-frequency NAKs being
received from device, which caused watchdog reset as USBHost spent all
time in interrupt handlers.
In our application the clocks frequencies are:
* HCLK = 48 MHz
* APB1 = 6 MHz
* APB2 = 12 MHz
We have captured the raw USB High-Speed traffic using OpenVizsla.
Without this change, when USB MSD device connected to the system
responded to IN with NAK, there were excessive IN tokens generated about
667 ns after the NAK. With this commit the IN tokens are generated no
sooner than 10 us after the NAK.
The high frequency of the IN/NAK pairs is not the biggest problem.
The biggest problem is that the USB Host did continue to send the IN token
after DATA and ACK packets were received from device - *without* any request
from upper layer (USB MSD).
The USB MSD devices won't have extra data available on Bulk IN endpoint
after the expected data was received by Host. In such case IN/NAK cycle
time is only houndreds of nanoseconds, the MCU has no time for anything else.
The problem manifested not only on Bulk endpoints, but also during
Control transfers. Example correct scenario (when this fix is applied):
* SETUP stage
* SETUP [host -> address 0 endpoint 0]
* DATA0 [80 06 00 01 00 00 08 00] [CRC16: EB 94]
* ACK
* DATA stage
* IN
* NAK
... the IN/NAK repeated multiple time until device was ready
* IN
* DATA1 [12 01 10 02 00 00 00 40] [CRC16: 55 41]
* ACK
* STATUS stage
* OUT
* DATA1 ZLP
* ACK
Without this commit, in DATA stage, after the ACK was received, the host
did send extra IN to which device responded with STALL. On bus it was:
* DATA stage
...
* IN
* DATA1 [12 01 10 02 00 00 00 40] [CRC16: 55 41]
* IN
* STALL
* IN
* STALL
* STATUS stage
* OUT
* DATA1 ZLP
* STALL
In the fault case the next SETUP was sent only after 510 ms, which
indicates timeout in upper layer.
With this commit the next SETUP is sent 120 us after the STATUS stage ACK.
2019-07-24 11:40:49 +02:00
b65be5fa29
Bug fixes to I2C and SPI drivers
...
- Fix assert when spi_master_block_write called with 0 size
- Fix assert when spi_format called before spi_frequency
- Simplify implementation of spi_master_write
- Simplify pointer arithmetic expressions in cyhal_spi_transfer and
cyhal_spi_transfer_async
- Fix I2C driver not honoring the frequency specified during init.
2019-07-23 15:40:45 -07:00
2bf79c1588
PSOC6: Remove USBDEVICE from FUTURE_SEQUANA targets
2019-07-23 15:30:06 -07:00
2a06ae20cc
Added missing pinmap definitions. Fixed target JSON config to avoid treating cc3220sf a target
2019-07-23 14:52:50 -05:00
c505d25186
Merge pull request #11077 from bentcooke/52840_align
...
NRF52840: remove align instructions from gcc linker for ARM.extab exi…
2019-07-23 11:37:47 +03:00
13873f388c
Merge pull request #11062 from AGlass0fMilk/fix-nrf52-saadc-res-again
...
Fix SAADC resolution for nRF52-based targets... again
2019-07-22 15:30:11 +03:00
0e33dd7e62
Merge pull request #11080 from kyle-cypress/pr/cy8ckit-062s2-43012
...
Add target for CY8CKIT_062S2_43012
2019-07-22 14:09:33 +03:00
0d6a3be91d
Merge pull request #11079 from bentcooke/52840_patch3
...
NRF52840: enable TRNG in Nordic SDK config
2019-07-22 14:07:41 +03:00
5aff943a84
Merge pull request #11064 from NXPmicro/Update_LPC_GPIO_IRQ
...
MCUXpresso: Fix the LPC GPIO IRQ driver
2019-07-22 11:42:46 +03:00
94f434227d
Merge pull request #11060 from NXPmicro/LPC_Update_SPI_Driver
...
MCUXpresso: Update LPC spi driver
2019-07-22 11:37:20 +03:00
40557cefeb
Add target for CY8CKIT_062S2_43012
2019-07-19 15:44:27 -07:00
36bd06c00a
NRF52840: enable TRNG in Nordic SDK config
2019-07-19 13:24:12 -05:00
892adc6e91
nrf52840: remove align instructions from gcc linker for ARM.extab exidx sections
2019-07-19 10:22:05 -05:00
96a773a0e6
STM32L4: update drivers version to CUBE V1.14.0
2019-07-19 13:15:07 +02:00
a372992aee
PSOC6: USB device implementation
2019-07-18 11:16:16 -07:00
34619e55a6
MCUXpresso: Fix the LPC GPIO IRQ driver
...
The IRQ disable was always disabling both rising
and falling edges of the interrupt thereby causing
failures in cases when one of the two should stay enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-17 15:18:59 -05:00
12d60f86ea
Merge pull request #11050 from jeromecoutant/PR_DISCO_L4R9I
...
DISCO_L4R9I new target
2019-07-17 23:15:45 +03:00
4cdde1d07f
Merge pull request #11052 from NXPmicro/Update_LPC546XX_ADC
...
Update MCUXpresso AnalogIn driver for LPC devices
2019-07-17 23:14:35 +03:00
fa9a3ed05f
Merge pull request #11053 from maclobdell/psoc6-add-bootloader-support
...
Add Mbed bootloader support to CY8CKIT_062_WIFI_BT and CY8CPROTO_062_4343W
2019-07-17 23:12:11 +03:00
e74fbcd79e
Add CC3220SF_Launchxl to Mbed OS
2019-07-17 13:19:32 -05:00
7ff707c9b4
Fix SAADC resolution for nRF52-based targets... again
2019-07-17 11:43:20 -04:00
3d5489a6f8
Merge pull request #10644 from fkjagodzinski/hal-gpio_pinmap
...
Add a gpio pinmap
2019-07-17 14:39:40 +03:00
987533859a
Merge pull request #10104 from kjbracey-arm/sleep_api
...
Sleep rework, RTOS API for bare metal, wait deprecations
2019-07-17 14:37:53 +03:00
8efd123776
Merge pull request #11042 from caoyuan96421/bugfix
...
Fixed serial_device IRQ infinite loop bug due to uint8_t overflowing in STM devices
2019-07-17 14:33:21 +03:00
02f8fbda62
Merge pull request #11019 from OpenNuvoton/nuvoton_wait-ns
...
Nuvoton: Modify wait ns(...) to provide more accurate implementation
2019-07-17 14:30:47 +03:00
0a4e5146b0
Merge pull request #11049 from SeppoTakalo/normalize
...
Normalize line endings for IM880B startup files.
2019-07-17 09:24:52 +01:00
e50583459f
LPC54114: Fix compile warnings
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-16 12:29:32 -05:00
55a2eddf8a
MCUXpresso: Update LPC SPI HAL driver
...
Add support for different slave selects
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-16 12:10:34 -05:00
ccbfea502c
add defines for bootloader support, for target without cmsis pack
2019-07-15 23:13:22 -05:00
9b8a859883
MCUXpresso: Update the Analogin driver for LPC devices
...
1. Update the clock divider setting
2. ADC resolution is 12-bits, update the API return value
to return 16-bit result
3. Update IOMUX setup
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-15 14:40:55 -05:00
f4648673cf
LPC54114: Update the ADC SDK driver
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-15 14:40:55 -05:00
7b011e9fe2
LPC546XX: Update the ADC SDK driver
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-15 14:40:55 -05:00
9cdfe37783
Merge pull request #10994 from fkjagodzinski/fix-serial_fc_guards
...
Add DEVICE_SERIAL_FC guards to serial HAL API
2019-07-15 15:47:37 +03:00
01484a2226
Merge pull request #11007 from SiliconLabs/fix/fpga_tests/pwm
...
Fix PWM output on Silicon Labs targets for large pulsewidths
2019-07-15 15:43:46 +03:00
b5d8c3860e
Merge pull request #11008 from SiliconLabs/fix/fpga_tests/spi
...
Enable FPGA-based SPI testing on Silicon Labs targets
2019-07-15 15:42:55 +03:00
6ef5e228b5
Merge pull request #11015 from SiliconLabs/fix/fpga_tests/adc
...
Fix wrongly declared ADC pinout for EFM32GG11 STK3701A
2019-07-15 15:38:47 +03:00
5c45fa72a9
Merge pull request #11003 from NXPmicro/Fix_LPC_I2C
...
LPC MCUXpresso: Remove extra I2C transaction on byte write
2019-07-15 15:32:02 +03:00
1a835dda4a
DISCO_L4R9I new target
2019-07-15 14:06:40 +02:00
b22641ca18
Normalize line endings for IM880B startup files.
2019-07-15 14:56:22 +03:00
c98b0d0b03
VK_RZ_A1H: add mbed_get_a9_tick_irqn
2019-07-15 10:13:50 +03:00
a522dcfa0a
Replace deprecated wait calls
2019-07-15 10:13:50 +03:00
6ed21ee1c0
Fixed serial_device IRQ infinite loop bug due to uint8_t overflowing
2019-07-13 00:05:25 -04:00
1e5a52a1fd
[Nuvoton] Fix mbedmicro-rtos-mbed-systimer/Wake up from deep sleep failing
...
This test requires total latency (tot = h/w + s/w) (wakeup from deepsleep) be
under 1ms. To check the issue, measure total latency on Nuvoton targets:
TARGET EXP(us) EXP+TOL(us) ACT(us)
NANO130 42000 43000 42939
NUC472 42000 43000 42236
M453 42000 43000 43274
M487 42000 43000 42877
M2351 42000 43000 43213
Checking h/w spec, h/w latency (wakeup time from normal power-down mode) on
M487/M2351 is just 1us (n/a on other targets). S/W latency plays the major
part here.
S/W latency relies on system performance. On Nuvoton targets, 'LPTICKER_DELAY_TICKS'
possibly complicates the test. Anyway, to pass the test, add extra 1ms latency
(deep-sleep-latency) in targets.json for Nuvoton targets.
2019-07-12 13:10:59 +08:00
22c82dcb9c
Merge pull request #10692 from vmedcy/pr/psoc6-hal
...
PSOC6: initial integration of Cypress HAL
2019-07-11 17:28:23 +01:00
b6524070eb
PSOC6: TARGET_PSOC6_FUTURE doesn't implement DEVICE_I2CSLAVE
2019-07-11 15:43:25 +03:00
7db0e83836
Merge pull request #11013 from tymoteuszblochmobica/revert-10938-iar
...
Revert "K64F, STM32F429: IAR linker scripts dynamic heap fix"
2019-07-11 12:18:53 +01:00
adfac3c1f9
PSOC6: do not remove QSPI from FUTURE_SEQUANA targets
...
Since QSPi is not yet supported by base TARGET_PSOC6,
there is no need to remove the device label from
FUTURE targets that inherit from TARGET_PSOC6.
This will need to be reverted back once the QSPI support
is implemented for Cypress PSOC6 targets.
2019-07-11 12:51:52 +03:00
bab34cb467
PSOC6: cleanup DEVICE_QSPI mappings
...
Note: device_has: "QSPI" is still disabled for TARGET_PSOC6
(QSPI HAL implementation is incomplete).
2019-07-11 12:50:56 +03:00
2524a67c38
Merge remote-tracking branch 'ARMmbed/master' into pr/psoc6-hal
2019-07-11 10:19:03 +01:00
9fdfe3fa30
Merge pull request #11002 from NXPmicro/Add_Restricted_List
...
LPC546XX: Add pins to LPCXpresso restricted list
2019-07-11 08:14:20 +01:00
878c93673b
Reverted "K64F, STM32F429: IAR linker scripts dynamic heap fix"
...
due to side effect with K64F bootloader application jump after three consecutive HW resets.
2019-07-10 13:30:40 +02:00
35851005ef
Fix wrongly declared ADC pinout for EFM32GG11 STK3701A
2019-07-10 11:27:29 +01:00
140b72d3ed
Merge remote-tracking branch 'ARMmbed/master' into pr/psoc6-hal
2019-07-10 10:54:14 +01:00
fb4d898f2e
Allow re-initializing an I2C peripheral
...
Allows the FPGA based test to pass, but requires #11004 before it will
2019-07-09 23:37:11 +01:00
6094542bb1
Avoid the FPGA tester using hardware CS which is not supported
...
Also implement rudimentary spi_free...
2019-07-09 22:48:37 +01:00
476dc6e46a
Fix for PWM output found by testing against FPGA shield
...
Two issues:
* Downcasting too early
* Potential for a uint32_t overflow in an intermediate calculation
Passing test requires #11005 to be merged.
2019-07-09 22:38:53 +01:00
aef60d7edf
LPC MCUXpresso: Remove extra I2C transaction on byte write
...
An extra start signal was observed on the bus which was
discovered by the FPGA test shield.
This is because the hardware sends out a transaction as soon
as a write to the START bit. Hence the write to the START
bit is delayed by using a flag.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-09 16:05:28 -05:00
58ba83b6e4
LPC546XX: Add pins to LPCXpresso restricted list
...
FPGA GPIO tests cannot be run on certain pins
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-07-09 15:40:55 -05:00
4842c87815
RDA5981X: Add SERIAL_FC
...
According to comment in the implementation this target supports the
hardware flow control on UART1 peripheral.
This patch fixes build errors after adding DEVICE_SERIAL_FC guards to
hal/serial_api.h.
2019-07-09 16:30:12 +02:00
68d222b3d1
MPS2: Fix serial_init when FC is not used
...
After adding DEVICE_SERIAL_FC guards to serial_api.h
serial_set_flow_control is not available. In case of this
implementation, this function is a no-op and may be safely removed.
2019-07-09 16:12:32 +02:00
86149e59d6
FVP_MPS2: Fix serial_init when FC is not used
...
After adding DEVICE_SERIAL_FC guards to serial_api.h
serial_set_flow_control is not available. In case of this
implementation, this function is a no-op and may be safely removed.
2019-07-09 16:05:04 +02:00
647b5817ce
Merge pull request #10982 from jeromecoutant/PR_LPUART
...
STM32 LPUART minor update for easy maintenance
2019-07-09 08:33:06 +01:00
21df0e00ce
[Nuvoton] Enlarge LPTICKER_DELAY_TICKS for safe
...
On Nuvoton targets, lp_ticker_set_interrupt(...) needs around 3 lp-ticker
ticks to take effect. It may miss when current tick and match tick are very
close (see hal/LowPowerTickerWrapper.cpp). Enlarge LPTICKER_DELAY_TICKS to
4 from 3 to address this boundary case.
2019-07-09 15:27:34 +08:00
358046e472
Merge pull request #10989 from mprse/spi_fpga_basic_test_ext
...
SPI FPGA test extension + SPI driver fix (K64F)
2019-07-08 20:42:47 +01:00
d77fb26e9f
PSOC6: fix license headers per review feedback
2019-07-08 18:25:03 +03:00
1264660314
Merge pull request #10972 from 0xc0170/test_target
...
add new target IM880B
2019-07-08 16:34:36 +03:00
bd762ce03f
Merge pull request #10466 from jeromecoutant/PR_STM32H7_WATCHDOG
...
STM32H7: WATCHDOG and RESET_REASON support
2019-07-08 13:54:40 +01:00
7d7c1416af
K64F SPI driver: Add the delay between CS assertion and first sclk edge
...
FPGA test shield requires at lease half slck period delay between CS assertion and first sclk edge.
2019-07-08 14:54:33 +02:00
1501ffe704
PSOC6: remove CY8CKIT-062S2-4343W (not ready for release)
...
Also removed _M0 targets that are no longer used.
2019-07-08 14:49:26 +03:00
5cc66282dd
PSOC6: remove PSA targets
2019-07-08 14:49:26 +03:00
56f1d0613f
PSOC6: remove libwiced_drivers for targets ported to WHD
2019-07-08 14:49:26 +03:00
d07ca87816
PSOC6: update Cypress boards to use TARGET_WHD
2019-07-08 14:49:26 +03:00
8ede226c16
PSOC6: add WHD sources
2019-07-08 14:24:23 +03:00
4f22853c1e
PSOC6: update BSP sources
2019-07-08 14:24:23 +03:00
c647531767
PSOC6: update BSP GeneratedSource, add design.modus
2019-07-08 14:24:22 +03:00
4bd47e9bca
PSOC6: update to latest psoc6pdl
2019-07-08 14:24:21 +03:00
b562dd7895
PSOC6: update Cypress targets to use psoc6csp
2019-07-08 14:24:20 +03:00
a9cd9482c0
PSOC6: add psoc6csp asset with Cypress HAL implementation
...
PSoC 6 Chip Support Package provides hardware abstraction layer
for Cypress PSoC 6 device peripherals.
2019-07-08 13:26:46 +03:00
3d905b0607
[NUC472] Override wait_ns(...) to provide more accurate implementation
...
NUC472 series doesn't support cache but supports branch buffer. But it still
cannot provide zero-wait state flash performance.
2019-07-08 17:52:26 +08:00
2b9ee2a93f
[NANO130] Override wait_ns(...) to provide more accurate implementation
...
NANO100 series doesn't support cache and so cannot provide zero-wait state
flash performance.
2019-07-08 17:52:26 +08:00
a03985ea43
[M2351] Refine wait_ns(...) code
...
1. Add missing header file for mbed_mpu_manager_lock_ram_execution()/
mbed_mpu_manager_unlock_ram_execution() to avoid compile warning.
2. Locate delay_loop_code() on 16-byte boundary (sync to common version).
3. Optimize delay_loop macro (sync to common version).
2019-07-08 17:51:49 +08:00
c9105eb068
PSOC6: use prebuilt CM0+ C arrays instead of HEX images
...
Replace the prebuilt CM0+ HEX images with C files that provide the
variable cy_m0p_image placed to the combined ELF image with linker
script. This simplifies build flow of PSoC 6 application and improves
compatibility with IDE export targets. It is still possible to use
the custom prebuilt HEX images for PSA targets that remove CM0P_SLEEP
label and specify the `hex_filename` in targets.json.
Linker scripts are compatible with both scenarios.
2019-07-08 10:41:02 +01:00
9d983478d7
PSOC6: add psoc6cm0p asset with prebuilt CM0+ C arrays
2019-07-08 10:33:48 +01:00
903085d066
PSOC6: format extra labels for Cypress kits
2019-07-08 10:31:14 +01:00
3d65ace77a
Merge pull request #10950 from artokin/Update_freescale_K6xF_linker_files
...
Enable split heap in K64F/K66F devices
2019-07-08 11:46:30 +03:00
8a3fd6a040
STM32 LPUART update
2019-07-05 17:52:41 +02:00
923be9e20e
NUCLEO_H743ZI: enable WATCHDOG back
2019-07-05 14:44:47 +02:00
8b6d0920a8
STM32H7: Reset Reason update
2019-07-05 14:44:45 +02:00
aa31b1268a
STM32H7 watchdog patch
2019-07-05 14:44:43 +02:00
da9b919268
STM32H7: Increase watchdog timeout value
2019-07-05 14:44:41 +02:00
3384cea281
STM32H7 : add LSI
2019-07-05 14:44:39 +02:00
97d50ed936
Merge pull request #10873 from ganesh-ramachandran/m3hq_newfeatures
...
Add new features to Toshiba's TMPM3HQ
2019-07-05 13:06:46 +01:00
e08b7137a6
Merge pull request #10874 from ganesh-ramachandran/m3h6_newfeatures
...
Add new features to Toshiba's TMPM3H6
2019-07-05 13:06:03 +01:00
d7190c8af4
Adjust K66F GCC_ARM linker file
...
Move heap_0 after .data as it is also placed to m_data.
2019-07-05 14:59:35 +03:00
1eeed8c0e5
Merge pull request #10968 from teetak01/fix-mtb-stm-s2lp-for-client
...
Add FLASHIAP for MTB_STM_S2LP
2019-07-05 11:21:48 +01:00
b47064ae65
Merge pull request #10933 from tymoteuszblochmobica/chache
...
Nordic NRF52832 cache ON
2019-07-05 10:09:59 +01:00
c327f4f070
add new target IM880B
2019-07-05 09:19:51 +01:00
a56247317e
Merge pull request #10798 from ThunderSoft123/master
...
TARGET_TT:Add GPIO INT pin with PT1
2019-07-05 08:57:34 +01:00
0726e2f13b
Add FLASHIAP for MTB_STM_S2LP
...
Fix device management client compilation on MTB_STM_S2LP
Fixes:
./mbed-cloud-client/mbed-client-pal/Source/Port/Reference-Impl/OS_Specific/mbedOS/ROT/pal_plat_rot.cpp:67:5: error: 'DeviceKey' was not declared in this scope
DeviceKey &devkey = DeviceKey::get_instance();
2019-07-05 10:26:26 +03:00
61ad427a35
Changes for RTC peripheral status
2019-07-03 17:58:47 +05:30
b4c0ce3a7e
Changes for RTC peripheral status
2019-07-03 17:57:49 +05:30
3d48b7c1cc
Changes for RTC peripheral status
2019-07-03 17:50:26 +05:30
6841f4a73a
Added new features to TMPM3HQ
2019-07-03 17:18:10 +05:30
bcaeddcb35
Removed dead code in TMPM4G9 - rtc_api.c
2019-07-03 17:10:30 +05:30
6eb07c1beb
ARMC5 updated to ARM for TMPM4G9
2019-07-03 17:10:29 +05:30
4bbc29f32c
Added SPDX identifier
2019-07-03 17:10:29 +05:30
2384b69b16
Added new features to TMPM4G9
2019-07-03 17:10:29 +05:30
2fee8d7390
Added new features to TMPM3H6
2019-07-03 17:01:41 +05:30
608e4c245f
Merge pull request #10938 from tymoteuszblochmobica/iar
...
K64F, STM32F429: IAR linker scripts dynamic heap fix
2019-07-03 12:00:35 +01:00
0e3a96305c
Merge pull request #10939 from AGlass0fMilk/fix-nrf52840-adc-resolution
...
Fix SAADC resolution for nRF52-based targets
2019-07-03 11:47:17 +01:00
ccb63d771e
Merge pull request #10857 from ARMmbed/feature-watchdog
...
Add Watchdog and ResetReason
2019-07-03 11:43:52 +01:00
810cb8de4a
Enable split heap in K64F/K66F devices
...
-Enable MBED_SPLIT_HEAP for K64F and K66F
-Allow GCC_ARM toolchain to utilize remaining 64K memory area
-Make ARM toolchain to start memory filling from 64K region to leave
more space to bigger 192K region.
2019-07-03 11:47:32 +03:00
149d53cc89
Merge pull request #10619 from jamesbeyond/fm-iap
...
Fastmodel: enable flashIAP and kvstore
2019-07-02 14:23:00 +01:00
a84c239830
Merge pull request #10701 from LMESTM/STM_lp_ticker_low_level_wrapper
...
STM: replace C++ low power ticker wrapper with a low level wrapper
2019-07-02 12:50:11 +01:00
fd445a57cb
Watchdog: remove config value for timeout, set it dynamically
...
Use start method to set timeout
2019-07-02 12:46:23 +01:00
7b0915c7d4
Watchdog: refactor driver
...
Watchdog is hardware driver. It interacts with HAL - provides wrapper to interact with the peripheral.
Provides basic functionality: start/stop, get timeout/max timeout.
It is automatically kicked by a timer, according to the timeout set in ctor.
2019-07-02 12:46:23 +01:00
8b49ffc0c3
Merge pull request #10920 from NXPmicro/Update_Kinetis_SDK_Clock_Driver
...
Kinetis MCUXpresso: Update the clock drivers
2019-07-02 12:44:09 +01:00
f2b88362fb
Apply same resolution fix to nRF52832 targets
2019-07-01 12:22:04 -04:00
b08a26bfa0
Fix SAADC resolution set in sdk_config. analogin_read_u16 assumes 12-bit range but config was set to 10 bit range causing incorrect readings to be returned.
2019-07-01 12:09:27 -04:00
83057c95d0
IAR icf linker scripts modified to use dynamic heap allocation of all available memory.
2019-07-01 17:57:40 +02:00
1af0fe89b8
Nordic NRF52832 onboard instruction cache is turned ON to increase MCU performance
2019-07-01 15:08:53 +02:00
1ced842391
STM: Correct macro test in us_ticker_defines.h
...
Avoids build warning caused by #10609
2019-07-01 13:34:55 +03:00
279925b6fc
Merge pull request #10869 from mathias-arm/master
...
LPC55S69: fix cosFactor data size in header file
2019-07-01 09:27:57 +01:00
be2c2bed30
Merge pull request #10884 from jeromecoutant/PR_H743ZI2
...
NUCLEO_H743ZI2 new target support
2019-07-01 09:27:31 +01:00
9e0dc3e198
Merge pull request #10859 from malavikasajikumar/master
...
Removing I2C and SPI pin names in SDP-K1 PinNames.h file.
2019-07-01 09:23:06 +01:00
d71db32154
Merge pull request #10881 from AGlass0fMilk/fix-nrf52-critical-region-api
...
Fix Nordic/Mbed Critical Section API Inconsistency (In Builds w/o Softdevice)
2019-07-01 09:18:10 +01:00
6331034bd1
STM32 with low level ticker wrapper require Extra Idle stack
2019-07-01 09:33:23 +02:00
58a4685811
STM32: lp_ticker optim: initialize handle once only
2019-07-01 09:33:23 +02:00
ee95c7e64a
STM32: lp_ticker optim: remove irq_handler variable
2019-07-01 09:33:23 +02:00
8616cd7655
Update comments and fix typo
2019-07-01 09:33:23 +02:00
501881bf38
Update warning now that C++ wrapper is not needed anymore
...
Now we'd rather not use this wrapper and use instead the low level
wrapper implemented in this driver.
2019-07-01 09:33:22 +02:00
6397a6189f
STM32 targets: remove tickless from us ticker and delay ticker
...
For L0/L4/H7/F7/WB targets that have tickless enabled, remove the tickless from
us ticker and the delay ticks as the C++ wrapper layer is being removed
and replaced by the low layer handling.
For now, the few F4 targets with LPTIM are left with previous configuration
as test results are showing a few instabilities not yet understood.
2019-07-01 09:33:22 +02:00
d4ec62ff0c
Manage lp_ticker delay at low level
...
LP TICKER mbed-os wrapper needs to be disabled as it introduces too much latencies.
LP TICKER wrapper has been disabled and we need to managed the HW constraints at low level:
- main HW constraint is that once the comparator has been programmed once,
driver cannot program it again before CMPOK HW flag is set, which takes about 3 30us cycles.
To make it even more complex, the driver also needs to cope with "LP ticker workaround"
See commit:
LP ticker workaround
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
Also the disable interrupt is more complete now:
- always check sleep manager status and restore it
- remove irq_handler as comparator is always programed and might get called
eventually when LP TICK is restarted
- reset delayed_prog
Also in set_interrupt, make sure interrupt does not fire early.
If needed, we decide to slightly delay the tick to cope with the HW limitation to
make sure it will fire as soon as HW is capable.
Functions are called under critical section as they may be called from
the IRQ handler now, not only from driver layer.
2019-07-01 09:31:53 +02:00
6452eb3172
LP ticker workaround
...
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
As a consequence the interrupt is firing early than expected when
programing a timestamp after the 0xFFFF wrap-around.
In order to
work-around this issue, we implement the below work-around.
In case timestamp is after the work-around, let's decide to program the
CMP value to 0xFFFF, which is the wrap-around value. There would anyway be
a wake-up at the time of wrap-around to let the OS update the system time.
When the wrap-around interrupt happen, OS will check the current time and
program again the timestamp to the proper value.
2019-07-01 09:31:53 +02:00
6c674ec0c7
Kinetis MCUXpresso: Update the clock drivers
...
Updated driver includes
1. Bug fixes
2. Formatting updates.
3. Fix for warnings
4. Better code commenting
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-06-28 10:09:52 -05:00
85c477c1dc
Merge pull request #10609 from kjbracey-arm/us_ticker_optimise
...
wait_us optimization
2019-06-28 14:29:00 +01:00
61c4d05ce9
Merge pull request #10824 from ABOSTM/PRSTM32_PWMWRTIE_GLITCH_10734
...
STM32: pwmout_write: configure channel only when not already enabled
2019-06-28 14:24:14 +01:00
201a264051
Merge pull request #10791 from hugueskamba/fix-lpc55s69-bootloader-segmentation
...
bootloader: Fix LPC55S69 bootloader segmentation
2019-06-27 10:22:55 +01:00
d4aab5669d
Merge pull request #10888 from devran01/issue/10883
...
Remove macro MBEDTLS_PSA_CRYPTO_C from PSA targets
2019-06-27 10:10:47 +01:00
edeeb33ba7
Update gpio_irq_api.c
2019-06-26 22:33:31 +08:00
b0804c4a0d
bootloader: Fix LPC55S69 bootloader segmentation
...
As the build tool in mbed-os 5.13 cannot appropriately deal with a segmented
bootloader when combining it with an application, this commit adjusts the
size reserved for interrupts (via the linker file) to avoid a bootloader
segmentation due to an unpopulated ROM area.
The microcontroller has a total of 60 vector interrupts + 16 exception
handlers. The allocated ROM flash for interrupts should be (60 + 16) x word
size in bytes = 76 x 4 = 304 = 0x130.
This commit changes the interrupt reserved space from 0x140 to 0x130.
2019-06-26 13:55:07 +01:00
924af9481e
Merge pull request #10841 from VVESTM/vve_10827_spi_count
...
TARGET_STM: Add DEVICE_SPI_COUNT to use SPIs without interference
2019-06-26 09:09:38 +01:00
b0073bb70d
Merge pull request #10774 from fkjagodzinski/fix-uart_irq
...
Fix serial IRQ handling
2019-06-25 15:49:41 +01:00
fa2e0217f2
Merge pull request #10856 from jeromecoutant/PR_CRC_LO
...
STM32: enable CRC for all L0/L4/F7
2019-06-25 11:08:08 +01:00
bd9d615897
Remove MBEDTLS_PSA_CRYPTO_C from PSA NS targets
...
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
2019-06-25 09:55:59 +01:00
cb8f2c07a1
1. Include MBEDTLS_CONFIG_FILE before evaluating MBEDTLS_PSA_CRYPTO_C
...
2. Remove macro MBEDTLS_PSA_CRYPTO_C from PSA targets
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
2019-06-24 14:33:04 +01:00
15cd907d35
Fix alignment
2019-06-24 08:34:54 -04:00
d2ea0f9432
NUCLEO_H743ZI2 new target support
2019-06-24 11:00:58 +02:00
24384a0fa0
Update gpio_irq_api.c
2019-06-23 22:00:51 +08:00
f548f558da
Fixed bug causing Nordic drivers to use a different critical section API from Mbed. This caused conflicts when Nordic's critical section API would globally reenable interrupts while Mbed still expected to be in a critical section.
2019-06-20 14:54:10 -04:00
a339084684
STM32: pwmout_write: configure channel only when not already enabled
...
Fix PWM glitch on write(), TARGET_STM/pwmout_api.c, #10734
2019-06-20 17:49:16 +02:00
fcde82ba4f
HAL I2C: adds missing DEVICE_I2C guards
2019-06-19 23:08:55 +02:00
ccbb26e2f3
LPC55S69: fix cosFactor data size in header file
...
The file 'fsl_powerquad_data.h' declares several dctXXX_cosFactor
arrays with sizes twice larger compared to the actual definitions in
'fsl_powerquad_data.c'.
2019-06-19 15:17:18 -05:00
4bd1d15d01
Merge pull request #10795 from jamesbeyond/fm_m0p_no_mpu
...
FastModel: trun off MPU for FVP_MPS2_M0P
2019-06-19 12:39:17 +01:00
32c8bf5969
Merge pull request #10792 from hugueskamba/fix-lpc55s69-sector-size
...
Fix: Allow target size restriction for LPC55S69
2019-06-19 12:36:22 +01:00
2a7635f536
Merge pull request #10782 from d-kato/rza1_armc6
...
GR_LYCHEE,RZ_A1H,VK_RZ_A1H: Fix greentea test failure with ARMC6
2019-06-19 12:33:28 +01:00
372f9c89fc
Merge pull request #10769 from vmedcy/pr/psoc6-softfp
...
PSOC6: add SOFTFP to standard component list
2019-06-19 12:31:15 +01:00
ac274833f0
Merge pull request #10741 from OpenNuvoton/nuvoton_m2351_wait-ns
...
M2351: Override wait_ns to provide more accurate implementation
2019-06-19 12:22:56 +01:00
07f1e068a9
Merge pull request #10689 from AGlass0fMilk/nrf52840-usbphy-implementation
...
nRF52840 USB Device Implementation
2019-06-18 16:28:20 +01:00
6632282b4a
Removing I2C and SPI pin names in SDP-K1 PinNames.h file.
...
This is to ensure the use of Arduino pin names Dxx for I2C and SPI pins in programs written for SDP-K1 board.
2019-06-18 08:15:01 -07:00
e10d2c8499
STM32: enable CRC for all L0/L4/F7
2019-06-18 13:53:04 +02:00
31eb49b918
TARGET_STM: Add DEVICE_SPI_COUNT to use SPIs without interference
...
Extend to all STM targets the work done on PR10752.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-06-14 14:15:56 +02:00
2ddb55007c
fix IAR compile error on fastmodels
2019-06-14 10:59:16 +03:00
8d15a2342f
STM: optimize us_ticker
...
Provide new optimizations for us_ticker and wait_us.
2019-06-14 10:22:08 +03:00
e5e2e0ac22
Freescale MCUXpresso: optimize us_ticker
...
Provide new optimizations for us_ticker and wait_us.
2019-06-14 10:22:08 +03:00
57310729d4
wait_us optimization
...
As the timer code became more generic, coping with initialization on
demand, and variable width and speed us_ticker_api implementations,
wait_us has gradually gotten slower and slower.
Some platforms have reportedly seen overhead of wait_us() increase from
10µs to 30µs. These changes should fully reverse that drop, and even
make it better than ever.
Add fast paths for platforms that provide compile-time information about
us_ticker. Speed and code size is improved further if:
* Timer has >= 2^32 microsecond range, or better still is 32-bit 1MHz.
* Platform implements us_ticker_read() as a macro
* Timer is initialised at boot, rather than first use
The latter initialisation option is the default for STM, as this has
always been the case.
2019-06-14 10:22:08 +03:00
5a8f795976
Merge pull request #10804 from VVESTM/vve_fix_10589
...
TARGET_STM: SPI: update pull up config depending on clk polarity
2019-06-14 07:45:25 +01:00
016ab2a417
[Nuvoton] Fix channel release in analogout_free()
2019-06-13 18:11:50 +08:00
4ad71c4d65
Merge pull request #10802 from Patater/update-to-mbedtls-2.18.0rc4
...
Update to mbedtls 2.18.0rc3
2019-06-12 16:09:02 +01:00
378e997e25
Merge pull request #10753 from desmond-blue/feature-fix-nrf52-uart-count
...
Fix nrf52 enabled uart count and enable uart0/1
2019-06-12 14:50:12 +01:00
39ea40fed3
psa: Avoid re-definition of MBEDTLS_PSA_CRYPTO_C
...
Mbed TLS now enables PSA APIs by default on all targets. It's not
necessary to explicitly enable MBEDTLS_PSA_CRYPTO_C, as that can be
gotten from the Mbed TLS config.h.
However, many PSA targets depend on `-DMBEDTLS_PSA_CRYPTO_C` being
defined by the Mbed OS json configuration system and are not yet
properly including the Mbed TLS configuration; for these PSA targets,
warnings may remain until this issue is fixed.
Avoiding re-definition will eliminate warnings like the following, when
building mbed-os-example-blinky:
Compile [ 14.5%]: pal_client_api_empty_intf.c
[Warning] pal_client_api_intf.h@35,0: "PSA_SUCCESS" redefined
Compile [ 14.6%]: pal_client_api_intf.c
Compile [ 14.7%]: DeviceKey.cpp
Compile [ 14.9%]: pal_internal_trusted_storage_intf.c
[Warning] pal_internal_trusted_storage_intf.c@45,9: 'psa_its_set' is deprecated: PS specific types should not be used [-Wdeprecated-declarations]
Compile [ 15.3%]: val_attestation.c
[Warning] client.h@40,0: "PSA_VERSION_NONE" redefined
<..>
Compile [ 33.3%]: asn1parse.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.5%]: aes.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.6%]: asn1write.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.7%]: psa_crypto.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.8%]: blowfish.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 33.9%]: camellia.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.0%]: base64.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.2%]: ccm.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.3%]: chacha20.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.4%]: chachapoly.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.5%]: cipher_wrap.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.6%]: cmac.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.7%]: cipher.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 34.9%]: bignum.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 35.0%]: des.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 35.1%]: dhm.c
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 35.2%]: ctr_drbg.c
<..>
Compile [ 70.9%]: EthernetInterface.cpp
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 71.0%]: InternetSocket.cpp
Compile [ 71.1%]: L3IPInterface.cpp
[Warning] config.h@2838,0: "MBEDTLS_PSA_CRYPTO_C" redefined
Compile [ 71.2%]: NetworkInterface.cpp
2019-06-12 12:47:20 +01:00
d5624b6ec6
Fix nrf52 enabled uart count and enable uart0/1
2019-06-12 15:36:09 +08:00
09ea361c7e
Merge pull request #10790 from jeromecoutant/PR_H7_LPUART
...
STM32H7 enable LPUART
2019-06-11 09:06:22 +01:00
94d2a42fd5
Merge pull request #10793 from jeromecoutant/PR_STM32WARNING
...
STM32: remove compilation warnings
2019-06-11 07:36:47 +01:00
fbcae489a0
Merge pull request #10762 from mprse/reenable_tests
...
Disable only time drifting test cases and fix GREENTEA_SETUP() call in tests
2019-06-11 07:35:41 +01:00
4f107cc061
Add GPIO INT pin with PT1
2019-06-10 09:46:04 +08:00
9dfc8d0ea7
Merge pull request #10775 from jeromecoutant/PR_H7_REFACTOR
...
STM32H7: refactor TARGET directory
2019-06-09 18:22:04 +01:00
356c4fb7cb
Merge pull request #10758 from toyowata/stm32f407xe
...
Move Seeed ARCH_MAX to TARGET_STM32F407xE MCU
2019-06-09 18:20:03 +01:00
dbe274ccf0
Merge pull request #10757 from petroborys/master
...
Add support I2C 3 for target EFM32G11
2019-06-09 18:19:42 +01:00
9ab0e09699
Merge pull request #10752 from teijokinnunen/stm32l0_target_spi_count
...
STM32L0: Add DEVICE_SPI_COUNT to DISCO_L072CZ_LRWAN1 + MTB_MURATA_ABZ
2019-06-09 18:19:34 +01:00
5581da56c9
Merge pull request #10751 from ThunderSoft123/master
...
TARGET_TT:Setting wisely pin mode for TT_M3HQ.
2019-06-09 18:19:05 +01:00
b683f4252e
Merge pull request #10739 from OpenNuvoton/nuvoton_m487_wait-ns
...
M487: Fix wait_ns test failed
2019-06-09 18:16:34 +01:00
ced4c3f4e4
Merge pull request #10708 from VVESTM/vve_fix_10671
...
TARGET_STM: SPI: add pulse on master transmissions
2019-06-09 18:10:42 +01:00
dda79d4d23
Merge pull request #10695 from Ronny-Liu/master
...
GD32_F450ZI : Add bootloader support
2019-06-09 18:06:25 +01:00
dc77c40fe9
Merge pull request #10709 from LDong-Arm/nrf52_cordio
...
Default to Cordio BLE stack for NRF52* targets
2019-06-09 18:03:34 +01:00
288a685be4
modify targets.json to trun off MPU
2019-06-07 18:36:13 +01:00
153ea175e8
correct CMSDK for M0Plus due to MPU is not presented
2019-06-07 18:35:25 +01:00
5ac7c8c77e
STM32WB warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:11:16 +02:00
ddcc63276a
STM32H7 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:11:04 +02:00
39ee51a017
STM32L4 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:10:17 +02:00
43a304351a
STM32L1 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:10:17 +02:00
daf8d114c4
STM32L0 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:10:17 +02:00
7d05f22b31
STM32F7 warning compilation
...
[-Wparentheses-equality]
[-Wsign-compare]
2019-06-07 18:10:03 +02:00
09a58b5203
STM32F4 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:51 +02:00
89f554fb53
STM32F3 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:51 +02:00
f3c7cc9d47
STM32F2 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:51 +02:00
8c2ee68be1
STM32F1 warning compilation
...
[-Wparentheses-equality]
2019-06-07 18:08:50 +02:00
int_szyk
Ryan Morse
Qinghao Shi
Marc Emmers
Chun-Chieh Li
jeromecoutant
Martin Kojtal
Chris Trowbridge
Kyle Kearney
Volodymyr Medvid
James Wang
George Psimenos
Vincent Veron
mahanthgouda
Kostiantyn Tkachov
Michal Paszta
Mahesh Mahadevan
Lin Gao
Leszek Rusinowicz
Andreas Terstegge
dolphin\gena
Jaeden Amero
Roman Okhrimenko
Hennadiy Kytsun
Laurent Meunier
aqib-ublox
Orest Akymyshyn
Leon Lindenfelser
Marcelo Salazar
Malavika Sajikumar
Shuopeng Deng
Tony Wu
Alexandre Bourdiol
cyliangtw
Anna Bridge
Chris Snow
Vairamuthu Ramasamy
Hugues Kamba
Ganesh Ramachandran
Martino Facchin
Seppo Takalo
Maciej Bocianski
Reda Maher
Seth Itow
Szymon Szantula
maclobdell
desmond.chen
David Rauschenbach
Filip Jagodzinski
Ireneusz Gaicki
Neil Tuttle
Ben Cooke
George Beckstein
Evelyne Donnaes
Arto Kinnunen
Kevin Bracey
Yuan Cao
Volodymyr Medvid
Tymoteusz Bloch
Steven Cooreman
Przemyslaw Stekiel
itziar
Teemu Takaluoma
Tymoteusz Bloch
ThunderSoft_mbed_os
Devaraj Ranganna
George Beckstein
Mathias Brossard
panyz0725@thundersoft.com