With tickless mechanism hsem can be used for quite a long time
(time to set up PLL clock).
Also, if hsem is held to long, then this is not the current core which is faulty,
but probably the other (the one which hold the HSEM)
Remove lwIP reliant networking and BLE tests for baremetal
Mbed OS 5 ported lwIP in its OS mode and uses threads. Networking
that rely on lwIP needs to be removed so it can be compiled with the
baremetal profile.
The BLE cordio Greentea tests are also disabled given that the feature
is not supported without an RTOS.
* Change "is supported" check to be a macro, so it can be done at
compile-time.
* Eliminate weird shift on 7-bit CRCs.
* Add support for 32-bit CRCs and reversals to TMPM3HQ.
dab09f3138 added checks on some functions in the form of MBED_ASSERT on the result.
Compiling with -NDEBUG elides the call, thus breaking the functionality
This patch restores it, while leaving the return check if compiled with standard profile.
- Enable FLASHIAP for all H7 boards
- Use "TDB_INTERNAL" for all H7 boards
- Define specific internal_base_address only for DISCO_H747I_CM7
(default address is the end of FLASH which is correct for other H7 boards)
- Correct GetSectorBase function with Dual Bank information
Analogin test fails on D13(PA_5) pin. When logic one (3.3V) is provided on this pin ADC reads 0.86 value. On other pins we got 0.98.
This is caused because this pin is connected to led2.
This copies the approach of the STM32F7 flash driver submitted via
PR https://github.com/ARMmbed/mbed-os/pull/10248
With this change the board finally passes all of the device key
tests 10/10 times correctly.
ARM Compiler 6.13 testing revealed linker errors pointing out
conflicting use of `__user_setup_stackheap` and
`__user_initial_stackheap` in some targets. Remove the unwanted
`__user_initial_stackheap` from the targets - the setup is
centralised in the common platform code.
Looking into this, a number of other issues were highlighted
* Almost all targets had `__initial_sp` hardcoded in assembler,
rather than getting it from the scatter file. This was behind
issue #11313. Fix this generally.
* A few targets' `__initial_sp` values did not match the scatter
file layout, in some cases meaning they were overlapping heap
space. They now all use the area reserved in the scatter file.
If any problems are seen, then there is an error in the
scatter file.
* A number of targets were reserving unneeded space for heap and
stack in their startup assembler, on top of the space reserved in
the scatter file, so wasting a few K. A couple were using that
space for the stack, rather than the space in the scatter file.
To clarify expected behaviour:
* Each scatter file contains empty regions `ARM_LIB_HEAP` and
`ARM_LIB_STACK` to reserve space. `ARM_LIB_STACK` is sized
by the macro `MBED_BOOT_STACK_SIZE`, which is set by the tools.
`ARM_LIB_HEAP` is generally the space left over after static
RAM and stack.
* The address of the end of `ARM_LIB_STACK` is written into the
vector table and on reset the CPU sets MSP to that address.
* The common platform code in Mbed OS provides `__user_setup_stackheap`
for the ARM library. The ARM library calls this during startup, and
it calls `__mbed_user_setup_stackheap`.
* The default weak definition of `__mbed_user_setup_stackheap` does not
modify SP, so we remain on the boot stack, and the heap is set to
the region described by `ARM_LIB_HEAP`. If `ARM_LIB_HEAP` doesn't
exist, then the heap is the space from the end of the used data in
`RW_IRAM1` to the start of `ARM_LIB_STACK`.
* Targets can override `__mbed_user_setup_stackheap` if they want.
Currently only Renesas (ARMv7-A class) devices do.
* If microlib is in use, then it doesn't call `__user_setup_stackheap`.
Instead it just finds and uses `ARM_LIB_STACK` and `ARM_LIB_HEAP`
itself.
- Use a switch statement rather than shifting and masking to compute
the AlternateBytes value.
- Rename rounded_size to alt_bytes to clarify its purpose.
The TC flag is used in function serial_is_tx_ongoing to check if there is
an ongoing serial transmission. So this Flag must not be cleared at the
end of the transmission, otherwise, serial_is_tx_ongoing will notify that
TX is ongoing.
The impact is that it may prevent deep sleep to be entered.
Also there is no need to clear this flag at the end of the transaction
because it will be cleared automatically by HW when a new transmission
starts.
Add 2 targets for DISCO_H747I dualcore:
* DISCO_H747I -> for CM7 core
* DISCO_H747I_CM4 -> for CM4 core
Current restrictions:
* TICKLESS deactivated
* DeepSleep not supported (DeepSleep wrapped to sleep)
Warning: use of the same IP (example I2C1) by both core at the same time is not prevented,
but is strongly not recommended.
Some Hardware Semaphore are use for common IP, to manage concurrent access by both cores: Flash, GPIO, RCC.
Warning: Drag and drop of binary to DISCO_H747I will flash CM7.
In order to flash CM4, one can use STM32 CubeProgrammer tool.
Martin Kojtal
jeromecoutant
Przemyslaw Stekiel
Alexandre Bourdiol
Laurent Meunier
Hugues Kamba
Kevin Bracey
Adam Mitchell
Martino Facchin
Janne Kiiskila
Jammu Kekkonen
Rohan Fletcher
toyowata
Kyle Kearney