* remove stdio checks in serial init if no console is available
* STM32WL fix set preamble length to 8
* Add target support for XDOT_MAX32670
* TARGET_STM: only mask CAN rx interrupt after rx interrupt, not all CAN interrupts
* Sleep Radio in between DC scheduled
* Nuvoton HUSBD support endpoint write ZLP
* USBCDC: support ZLP
* Don't overlap STM32 FDCAN RAM sections
* allow to override antenna gain
* TFM: Fix undeclared function tfm_ns_interface_init
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: CAN: Fix filter mask
NOTE: This fix only targets CAN (M453/M487), not CAN-FD (M467).
NOTE: NUC472 CAN doesn't support filter.
* NUVOTON: CAN: Fix Rx interrupt doesn't work
Major modifications:
1. Handle Rx interrupt based on Message Object interrupt (CAN_IIDR=0x0001~0x0020) instead of CAN_STATUS.RxOK
2. Also handle Tx interrupt following above for consistency
Other related modifications:
1. Fix signature type error in CAN_CLR_INT_PENDING_BIT()
2. Add CAN_CLR_INT_PENDING_ONLY_BIT() which doesn't clear NewDat flag so that user can fetch received message in thread context
NOTE: This fix only targets CAN (NUC472/M453/M487), not CAN-FD (M467).
* NUVOTON: CAN: Fix Message Object number for Tx and recognition of Rx interrupt
1. The same Message Object number cannot use for both Tx and Rx simultaneously.
For Tx, Message Object number 31 is reserved instead of 0.
For Rx, Message Object numbers 0~30 are used and for filters.
2. NewDat bit (CAN_IsNewDataReceived()) isn't exclusive to Rx.
Recognize Rx interrupt by Message Object number other than 31.
NOTE: This fix only targets CAN (NUC472/M453/M487), not CAN-FD (M467).
* NUVOTON: CAN: Fix filter mask being zero
On mask being zero, it means any match, not exact match.
NOTE: This fix only targets CAN (M453/M487), not CAN-FD (M467).
NOTE: NUC472 CAN doesn't support filter.
* Allow custom TCXO control parameter
Allow custom TCXO control parameter
* NUVOTON: EMAC: Fix undeclared function mbed_error_printf
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: AnalogIn: Fix undeclared function gpio_set
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: CAN: Fix undeclared function gpio_set
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: AnalogOut: Fix undeclared function gpio_set
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: SPI: Fix undeclared function gpio_set
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: I2C: Fix undeclared function gpio_set
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* NUVOTON: Serial: Fix undeclared function gpio_set
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
* Add separate flags for I2C slave transfer in progress
FixesARMmbed/mbed-os#15498
Adds 2 boolean flags to the STM32 `i2c_s` object
to indicate whether a transfer is in progress,
separate from the existing "transfer pending" flags.
`i2c_slave_write`, `i2c_slave_read` and their associated callbacks
are modified to use these flags in addition to the pending flags.
The original behavior of the pending flags is preserved.
* ESP8266: Fix accessing uninitialized variable
* Added missing delete
* Add ability to change number of status registers for macronix QSPIF devices
* correct scan parameters types
* skip CRC when initializing TDBStore
Problem: The build_ram_table() function of TDBStore loops over every entry, calculates the checksum and compares them to the stored checksum in the entry header to ensure integrity. For larger TDBStores (e.g. 8 MiB or more) in external single-SPI flash devices this check can take very long, thus rendering it unusable in some cases.
Solution: The suggested solution skips the time consuming CRC of the data. After reading the key and calculating its CRC, it sets next_offset to the beginning of the next entry, thereby skipping the data. While this skips the integrity check, it significantly reduces the initial building of the RAM table.
The data CRC can be enabled or disabled with a compiler flag.
Contribution is provided on behalf of BIOTRONIK.
* Added missing check for replay protection pointer before allocating new variable
Problem: If a key with write-once flag is being set in a SecureStore without rollback-protection store (i.e. _rbp_kv == NULL), additional memory will be allocated for the variable _ih->key. The memory will not be deleted, though, as the delete in line 434 only happens if a rollback-protection store exists (i.e. _rbp_kv != NULL)
Solution: Only allocate the memory if _rbp_kv != NULL
Contribution is provided on behalf of BIOTRONIK.
* Increase AT timeout to 10s in AT_CellularSMS::send_sms
For some devices sending can be slow (as an example see SIM800, it can be up to 60s), command is being run properly but default timeout is returning an invalid error.
See https://www.elecrow.com/wiki/images/2/20/SIM800_Series_AT_Command_Manual_V1.09.pdf
* Increase AT timeout to 10s in AT_CellularSMS::get_sms
When SMS list is big and baudrate is not fast enough, with default timeout we can suffer from timeout error while getting a sms because method is parsing the full list and this takes long.
* Fix AT_CellularSMS::list_messages breaking in text mode when CRLF is contained in SMS payload text
When parsing SMS, it can happen that we receive CRLF in the SMS payload (happened to me when receiving provider texts).
As an example, we can receive:
"""
Hello <CR><LF>
World!
"""
With previous implementation, second consume_to_stop_tag was stopping in <CR><LF> and rest of the code was failing for obvious reasons.
With this commit we consume the full payload as bytes.
* Add missing SPDX identifier to a bajillion Nuvoton source files + some others
* More license fixes, upgrade M451 legacy PinNames.h, add MCU description
* Fix some more legacy pin names
---------
Co-authored-by: Jost, Chris <79271064+chrJost@users.noreply.github.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leon Lindenfelser <llindenfelser@multitech.com>
Co-authored-by: Pavel Sorejs <sorejs@gmail.com>
Co-authored-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: Adam Gausmann <adamg@esdemc.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Matthias Goebel <matthias.goebel@biotronik.com>
Co-authored-by: danielzhang <danielzhang@mxic.com.cn>
Co-authored-by: Mathieu Camélique <mathieu.camelique@edu.hefr.ch>
Co-authored-by: David Alonso de la Torre <davidalto97@gmail.com>
* Fix null pointer dereferencing
Add null check for return values of functions that are mostly (but not
always) checked for null.
E.g., since 98% of calls to protocol_stack_interface_info_get_by_id
check for null, it is likely that the function can return null values in
some cases, and omitting the check could crash the program.
* Update MAX32660 peripheral drivers with final ones that use by SDK
* Apply MAX32660 delta
Update mbed hal function as per of SDK update
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M2354: Fix debug failure in Mbed Studio
In Mbed Studio, debugging, based on pyOCD, requires Mbed OS application code starting on the sector boundary.
Modification list:
1. Update TF-M import assets with MCUboot header padding to sector aligned
2. Following above, change header size argument (-H) in wrapper.py command line
3. Following below, fix min-write-size (--align) to 4 (per flash_area_align()) in wrapper.py command line
https://docs.mcuboot.com/design.html#image-trailer
Related issue:
https://github.com/ARMmbed/mbed-os/issues/15417
* Do not clear interrupt flag during initialization
This causes issue for repeaded initialization while using BufferedSerial mode
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32660, MAX32670 UART performance improvement
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* Handle negative values passed to close()
Calling close() with negative numbers causes out-of-bounds indexing of the filehandles array. For example, this can happen if open() returns an error and the value is later passed to close().
* Moved a { to the same line as if
Moved a { to the same line as if
* add nullpointer check in LWIP::socket_close
* Fix crash when using FDCAN3 RX IRQ on STM32G473 (and others)
* connectivity: drivers: Update Nuvoton M467 EMAC DMA_IE ctl
In IRQ Handler, to disable some interrupt type of DMA error.
It could avoid unexpected repeated interrupt.The masked bit of
DMA_IE could be recovered in next EMAC IRQ event.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
* Add workaround for G474 hardfault
* update drivers STM32WL CUBE V1.3.0
* Changed static to weak
* Fix: Do not disable SPI for manual drive mode during transaction setup
It has been reported that disabling SPI module causes glitch for manual SS drive mode
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* make cellular event queue size configurable
update unit tests
---------
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Ahmet Polat <Ahmet.Polat@maximintegrated.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: alrvid <126816223+alrvid@users.noreply.github.com>
Co-authored-by: Jost, Chris <79271064+chrJost@users.noreply.github.com>
Co-authored-by: Joseph Duchesne <joseph@avidbots.com>
Co-authored-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: Maxim Markin <mak22223@ya.ru>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Lukas Karel <lukas.karel@world-direct.at>
* Start working on fixing doxygen warnings
* Upgrade doxyfile to Doxygen 1.9.1
* Clean up some unmatched groups and add some exclusions
* Fix docs for rtos::ThisThread not showing up
* Fix up KV store docs
* Fix incorrect @files, some more incorrect groups
* Fix lots of broken links
* Start fixing mbedtls groups
* Fix more mbedtls docs
* Fix remaining mbedtls files with missing or incorrect grouping
* Fix a huge amount of PSA docs errors
* Fix a few more mbedtls docs errors
* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors
* Fix some broken doc links in HAL headers
* Fix more PSA doc errors
* Fix some doxygen errors in networking code
* Fix lots of network related doc errors
* Try and fix some CI failures
* Use Doxygen Action instead of doxygen in Mbed container to get the right version
* Try removing docs check
* Add first part of doxygen action
* Add next part of doxygen action
* Fix yaml syntax error
* Add in license check fix
* Try using verbose scancode
* Fix some more docs issues, workaround scancode-toolkit#3179
* Clean up the LoRaRadio get_state() function on each implementation. Also fix some other compile and doc errors.
* Fix all remaining doxygen errors
* Fix escaping, for realsies this time
* Remove Doxygen unsupported config options, fix some more get_status() declarations
* Fix some UNITTESTS build errors
* Fix one more compile error
* Another unittest error
* Add upload target for Arduino Nano 33 BLE, fix linker script preprocessing, add option for USB serial by default
* astyle error
* Use HINTS instead of PATHS so that the Arduino dir is searched first
* Enable OpenOCD and PyOCD for Nano 33 BLE in SWD mode
* Fix missing dependency for USB tests on Windows
* Add RAM defines for nrf52840
* Fix mbed-storage-kv-config depending on SD card library even if said library was not enabled
* Update dsrdtr value
* No longer need to modify linker script now that we aren't using whole-archive!
* Add OPENOCD_ADAPTER_SERIAL
* Add handling for cmsis dap
* Fix typo
* Fix weak symbol issue causing Bluetooth to not work. In this case, the weak implementation can simply be removed, because there's no legitimate case where it is used.
The Cordio stack uses a single CSRK. It can be used by a
malicious device to track the Mbed OS application if signed
writes are used.
Signed-off-by: Vincent Coubard <vincent.coubard@arm.com>
When unit tests or unit test stubs get added as CMake targets, they
becomes part of the "all" target and get compiled when building the
whole project. When building greentea tests we need to disable unit
tests and stubs to avoid unnecessary compilation and errors.
References to time should do so using std::chrono. We reworked tests in
connectivity and drivers to use std::chrono and new APIs in order to
remove deprecation warnings resulting from deprecated API calls.
This required addition of a macro for test assertions using std::chrono
values.
As host test "timing_drift_auto" expects time values represented as an
integral number of microseconds, we explicitly provide this in place
using "microseconds{TICKER_TIME}.count()" in the relevant ticker tests.
We recognise this is ugly, but thought it best to descriptively convert
from std::chrono to the host test's required representation.
Co-authored-by: Hari Limaye <hari.limaye@arm.com>
Use the `--coverage` option instead of manually linking to gcov, as some
host platforms (like macOS, FreeBSD) don't have gcov by default and use
an llvm equivalent instead.
Previously ble headers are part of mbed-headers-connectivity, this PR
moves ble headers into new mbed-headers-ble to make ble stubs to be
more self-contained and improves the composition of the library.
Assumption that greentea test file is always named main.cpp is
incorrect. Updated mbed_greentea_add_test() macro to make TEST_SOURCES
parameter compulsory, which is used to specify greentea test
file(s). This allows tests to use C, or have a different name.
Therefore also updated all pre-existing greentea test CMake files to
explicity add main.cpp to TEST_SOURCES.
Jamie Smith
Ladislas de Toldi
Jay Sridharan
Jamie Smith
Vincent Coubard
Lingkai Dong
Martin Kojtal
harmut01
Jaeden Amero
Rajkumar Kanagaraj
Paul Szczepanek
Hari Limaye