Decrease the interrupt stack from 2k down to 1k so there is enough
ram to build all the tests with tickless enabled. In general, targets
should not need an interrupt stack greater than 1k with mbed-os.
Fixing regression introduced in commit
"Ticker: add fire interrupt now function".
In above mentioned commit, the management of timestamp being in the past
has been moved to higher layer (hal/mbed_ticker_api.c), but the reset of
oc_int was missing when implementing the new us_ticker_fire_interrupt
function - which is fixed now.
Adding flash API support to STM32F7 family. The code is derived from
F4 family one. The memory topology is described in flash_data.h files
and the flash_api.c implementation manages the 2 possible memory types (1
or 2 banks).
Users of FlashIAP usually get the minimum programable size
by calling flash.get_page_size(), so let's return the minimum
to allows a most efficient usage of flash.
For F4 devices, this is 1 byte.
For L0 and L1 devices, this is a word (4 bytes).
For L4 devices, this is a double word (8 bytes).
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
This is a 1,5MB flash memory device which contains 15 sectors, where
sectors 12 to 15 are 128KB sectors. So flash_api.c needed has been
updated to differentiate between this flash memory and the 2MB ones
by checking existence of sector 16 instead of sector 12.
UBLOX_ODIN_EVK_W2 is missing the abstract button definitions originally
introduced with PR https://github.com/ARMmbed/mbed-os/pull/4249.
Fix two tab to spaces issues on the go as well.
It is required to enable AFIO clock before using __HAL_AFIO_REMAP_xy
macros, which was missing here. Without clocks enable, the remap
actually doesn't occur. This would possibly cause some PIOs (part of
PB_3, PB_4, PA_13, PA_14, PA_15) to not behave as expected.
In most cases AFIO clock was enabled in stm_pin_SetAFPin function, so
that this bug was not visible. But there were few cases left were
stm_pin_DisconnectDebug would be called first. A typical case was
with GCC_ARM in case a DigitalInOut variable is declared as global.
On F410RB, the size reserved to vectors with ARM toolchains was not properly
defined,which was not the case for other toolchains.
This would cause few tests to fail like EXAMPLE_1 with below error:
HOST: Unknown property: mbed assertation failed: _ptr == (T *)&_data, file: C:/github/mbed/BUILD/mbed/platform/SingletonPtr.h, line 91
Enabling SPI causes the clock to be output by default.
Most devices will not care about extra clock cycles, especially as long
as chip select is not active, nevertheless this may cause side issues
with other devices especially during init phase.
This was actually the case with a 3 wire device (LPS22HB sensor).
In case MISO is not passed at SPI init, then we consider a 3 wires SPI
configuration is requested, which corresponds to SPI_DIRECTION_1LINE
configuration parameter in STM32 HAL layer.
We're then handling this specific case of SPI_DIRECTION_1LINE,
in spi_master_write or spi_master_block_write, we call to HAL API
Jimmy Brisson
Russ Butler
Laurent MEUNIER
Martin Kojtal
Jan Jongboom
Kevin Gilbert
Wolfgang Betz
Janne Kiiskilä
bcostm
mapellil
Pavel Slama
jeromecoutant