For L0/L4/H7/F7/WB targets that have tickless enabled, remove the tickless from
us ticker and the delay ticks as the C++ wrapper layer is being removed
and replaced by the low layer handling.
For now, the few F4 targets with LPTIM are left with previous configuration
as test results are showing a few instabilities not yet understood.
LP TICKER mbed-os wrapper needs to be disabled as it introduces too much latencies.
LP TICKER wrapper has been disabled and we need to managed the HW constraints at low level:
- main HW constraint is that once the comparator has been programmed once,
driver cannot program it again before CMPOK HW flag is set, which takes about 3 30us cycles.
To make it even more complex, the driver also needs to cope with "LP ticker workaround"
See commit:
LP ticker workaround
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
Also the disable interrupt is more complete now:
- always check sleep manager status and restore it
- remove irq_handler as comparator is always programed and might get called
eventually when LP TICK is restarted
- reset delayed_prog
Also in set_interrupt, make sure interrupt does not fire early.
If needed, we decide to slightly delay the tick to cope with the HW limitation to
make sure it will fire as soon as HW is capable.
Functions are called under critical section as they may be called from
the IRQ handler now, not only from driver layer.
There is an errata in LPTIM specification that explains that CMP Flag
condition is not an exact match (COUNTER = MATCH) but rather a
comparison (COUNTER >= MATCH).
As a consequence the interrupt is firing early than expected when
programing a timestamp after the 0xFFFF wrap-around.
In order to
work-around this issue, we implement the below work-around.
In case timestamp is after the work-around, let's decide to program the
CMP value to 0xFFFF, which is the wrap-around value. There would anyway be
a wake-up at the time of wrap-around to let the OS update the system time.
When the wrap-around interrupt happen, OS will check the current time and
program again the timestamp to the proper value.
Port the cc310 SHA512 driver, even though it is sw implementation.
Because the linker could not remove the cc310 sha512 implementation,
there was duplicate implementation of SHA512, without enabling
the sha512 alternative implementation.
Static keyword causes problems when trying to use force-inlined
functions from normal inlined functions. This is not legal:
static inline void forced() { }
inline void normal() { forced(); }
You cannot reference internal-linkage things from external-linkage
inline functions.
Removal of the static implies that in C there would need to be a
non-inline definition in case anyone calls it non-inlined, but if the
force attribute is doing its job, that should not happen.
Only significant in-tree user of the MBED_FORCEINLINE macro is
the atomic operations - making this change permits atomic operations
from non-static inline functions.
If "lwip.tcp-enabled" is set to false, ARMC6 compilation fails to error
Error: L6218E: Undefined symbol netconn_recv_tcp_pbuf
LWIP::socket_recv() is TCP socket specific method so implementation can be
enabled only when LWIP_TCP flag is set.
As we start trying to use new facilities, we're likely to need some more
helpers.
In particular, ARM C 5 has no C++11 support in its library at all, so
to avoid totally breaking it we need some backup.
For the other toolchains, we can add a few C++17/C++20/TS extensions
into namespace mbed to make life a little easier.
* For ARM C 5: C++14 type_traits subset, std::move, std::forward,
std::array, std::initializer_list, std::begin, std::end,
std::align, std::maxalign_t, std::aligned_storage,
alignof + alignas macro replacements.
* For ARM C 5: MBED_CONSTEXPR_FN_14 and MBED_CONSTEXPR_OBJ_14 to
mark things that can only be constexpr in C++14 or later.
* For other compilers: mbed::void_t, mbed::type_identity,
mbed::conjunction, mbed::disjunction, mbed::negation,
mbed::experimental::nonesuch, mbed::experimental::is_detected family,
mbed::remove_cvref, mbed::as_const.
ARMC5 failed to compile the code with debug-profile (!!) as va_list
is getting into std:: namespace when one includes <cstdarg>. Other
compilers seem to be more relaxed, and so is ARMC5 if compiled
with other profiles.
Add the explicit std:: to references of va_list.
While here, remove one extra copy of "#include "PlatformMutex.h""
and a "#include <stdarg.h>" which is kind of duplicate of
"#include <cstdarg>".
Error being fixed:
--8<--8<--8<--
Compile [ 81.8%]: ATHandler.cpp
[Error] ATHandler.h@552,0: #20: identifier "va_list" is undefined
[Error] ATHandler.cpp@1226,0: #147: declaration is incompatible with "void mbed::ATHandler::handle_args(const char *, <error-type>)" (declared at line 552 of "./mbed-os/features/cellular/framework/AT/ATHandler.h")
[ERROR] "./mbed-os/features/cellular/framework/AT/ATHandler.h", line 552: Error: #20: identifier "va_list" is undefined
"./mbed-os/features/cellular/framework/AT/ATHandler.cpp", line 1226: Error: #147: declaration is incompatible with "void mbed::ATHandler::handle_args(const char *, <error-type>)" (declared at line 552 of "./mbed-os/features/cellular/framework/AT/ATHandler.h")
./mbed-os/features/cellular/framework/AT/ATHandler.cpp: 0 warnings, 2 errors
- Link to bug tracking: https://developer.trustedfirmware.org/T240
The issue is fixed by TF-M team. However they autogenerate region details
(code, ro, rw, zi and stack ) using linker scripts and in mbed-os we
also autogenerate region details but using mix of service definition in
json file and other template files.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
compiler errors as mbed-cli only generates "-D" macros only for
"macros" defined in targets.json
TF-M task link: https://developer.trustedfirmware.org/T396
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
As the build tool in mbed-os 5.13 cannot appropriately deal with a segmented
bootloader when combining it with an application, this commit adjusts the
size reserved for interrupts (via the linker file) to avoid a bootloader
segmentation due to an unpopulated ROM area.
The microcontroller has a total of 60 vector interrupts + 16 exception
handlers. The allocated ROM flash for interrupts should be (60 + 16) x word
size in bytes = 76 x 4 = 304 = 0x130.
This commit changes the interrupt reserved space from 0x140 to 0x130.
In Mbed OS, there are configuration options with Mbed TLS that we
are more comfortable allowing than we do with Mbed TLS on its own.
Add a check-config adjusting script to enable removing or changing
options in check_config.h
Tymoteusz Bloch
Kevin Bracey
Martin Kojtal
Laurent Meunier
Mahesh Mahadevan
jeromecoutant
Ron Eldor
Kimmo Vaisanen
Amanda Butler
Tero Jääskö
Devaraj Ranganna
ThunderSoft_mbed_os
Hugues Kamba
Darryl Green