ARCH_MAX board uses 0x01 as PHY address, different from other NUCLEO STM32 boards. To faciliate change of PHY address of customized boards, a configuration entry eth-phyaddr was added and can be overriden as needed in mbed_app.json by adding "stm32-emac.eth-phyaddr": X. Macro ETH_ARCH_PHY_ADDRESS was also renamed to ETH_PHY_ADDRESS, because it is not only used by ARCH_MAX board but also other boards.
Incorrect addresses only cause error return values instead of assertion.
ExhaustibleBlockDevice has working get/set_erase_cycle functions and an
array preventing programming without erase.
Fixed MBRBlockDevice partitioning function.
1.Testing with Verizon and AT&T SIMs, PDP type is automatically set to IPV4V6.
2. Testing with AT&T IoT SIM, PDP type automatically sets to IP. It will connect
but not communicate. Setting a subsequent APN to IPV4V6 with the same APN communicates.
-Improve help texts of Wi-SUN configuration values
-Add min/max value checks to Wi-SUN configuration values
-Define default values for some parameters, instead of referring to
Nanostack internal default values.
Issue: udp_sendto() Fails for multicast IPV6 packet when interface is switched from SoftAP to STA mode.
When SoftAP start is called, add_ethernet_interface() will be called internally to add interface details into netif_list.
When switching from SoftAP to STA mode, add_ethernet_interface() will be called again to append the interace details into netif_list.
When udp_sendto() is called, ip6_route() will return interface as NULL since it consider device as single interface.
Fix: SoftAP mode Stop, call remove_ethernet_interface() to remove the interface from the netif_list.
ARM microlib is not supported below features
- fflush(NULL) return `-1` instead `0`
- fread with size parameter "Zero".
- if file opened in append mode, file postion starts from the beginning.
Major changes:
- Dependency to FileHandle removed from base classes
- AT_CellularDevice owns the default FileHandle and shares it with AT -classes
- Hang-up -detection moved as CellularContext::configure_hup(). Cannot be configured via CellularDevice any more.
Result on NRF52840_DK + BG96:
GCC:
Total Static RAM memory (data + bss): 29360(+296) bytes
Total Flash memory (text + data): 130660(-832) bytes
ARM:
Total Static RAM memory (data + bss): 261554(+8) bytes
Total Flash memory (text + data): 127573(-1193) bytes
IAR:
Total Static RAM memory (data + bss): 25479(+296) bytes
Total Flash memory (text + data): 102418(-527) bytes
RAM increase is because now ATHandler is no longer created with new -operator but is now member of AT_CellularDevice,
so image tool is able to count it. Actually total RAM consumption has decreased due to removed variables.
Martin Kojtal
Michal Paszta
Zhiyonh Li
Hugues Kamba
Kimmo Vaisanen
Leon Lindenfelser
midd
jeromecoutant
Arto Kinnunen
Pawel Zarembski
Kevin Bracey
Veijo Pesonen
Ari Parkkila
Vincent Coubard
Arun S
Rajkumar Kanagaraj
Anna Bridge
PARKJIHOON
Andrew Chong