Add 2 targets for DISCO_H747I dualcore:
* DISCO_H747I -> for CM7 core
* DISCO_H747I_CM4 -> for CM4 core
Current restrictions:
* TICKLESS deactivated
* DeepSleep not supported (DeepSleep wrapped to sleep)
Warning: use of the same IP (example I2C1) by both core at the same time is not prevented,
but is strongly not recommended.
Some Hardware Semaphore are use for common IP, to manage concurrent access by both cores: Flash, GPIO, RCC.
Warning: Drag and drop of binary to DISCO_H747I will flash CM7.
In order to flash CM4, one can use STM32 CubeProgrammer tool.
Problem Statement:
During multicast join sequence, InternetSocket::join_multicast_group() calls InternetSocket::modify_multicast_group(). modify_multicast_group() sets up the multicast group address (i.e., mreq.imr_multiaddr) to be joined and the interface address (i.e., mreq.imr_interface) to be used for the multicast join request. The interface address is initialized with the default value, which sets the version of interface address to NSAPI_UNSPEC. This results in LWIP::setsockopt() API to attempt IPv6 multicast join on the IPv4 interface address, hence IPv6 multicast join always fails with the protocol error.
Fix:
Initialize interface address version based on the multicast address version in LWIP::setsockopt(), before attempting multicast join operation.
AT_CellularContext::do_connect() is a virtual API and therefore can be overwritten in
inherited class. The problem was that it sets AT_CellularContext::_is_connected flag but
earlier it was set as private member making it impossible to set in overwritten do_connect()
method.
This commit fixes the problem by changing _is_connected as protected enabling its use
in inherited class.
As of 722628be02, the "remainder" configuration
also uses the default location near the end of flash. Which makes the two tests
nearly identical with the exception that the "last two sectors" test correctly
handles parts with a low (possibly 1:1) erase size to program size ratio.
Therefore, change the "remainder" test to instead be a "default" test that uses
the tdb_internal_address/size values, so that it
a.) tests something meaningfully different and
b.) tests using the custom TDB address/size values if they are provided.
c.) functions correctly on devices where the default sector-based size computation
does not work (e.g. because of the low erase size to program size ratio)
and therefore a custom location and size has been specified.
The is_conf_tdb_internal variable is unused and therefore removed.
This is related to https://github.com/ARMmbed/mbed-os/issues/11256
When TARGET_PSA is enabled on Cortex-A boards, the SECURE
is redeclared. So to minimize the impact we can redeclare this in
val.h which is used only by Mbed. And `security_t` itself is used in
mbed-os\components\TARGET_PSA\TESTS, but the SECURE string is not used.
Renamed to `caller_security_t` which aligns with
https://github.com/ARM-software/psa-arch-tests
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
We get this compiler warning;
Compile [ 7.9%]: AT_CellularDevice.cpp
[Warning] AT_CellularDevice.cpp@206,18: variable 'err' set but not used [-Wunused-but-set-variable]
Due to the fact, that the code that would actually use this variable
is behind trace flags. Based on review feedback from Antti Kauppila and
Kimmo Väisänen, adding same flagging also for that.
- Reason being - the operation needs to be within the locks.
Martin Kojtal
Ilia Penev
Mukund Ghonasgi
Mika Leppänen
Alexandre Bourdiol
Sathish Kumar Mani
Michal Paszta
Anna Bridge
Antti Kauppila
Rohan Fletcher
mudassar-ublox
Jarkko Paso
Kimmo Vaisanen
Kyle Kearney
Ari Parkkila
Vikas Katariya
Matthew Macovsky
Janne Kiiskila
Mika Tervonen