Filip Jagodzinski
53222fa448
STM32L4: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:33:49 +02:00
Filip Jagodzinski
fa0cc68657
STM32H7: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:30:03 +02:00
Filip Jagodzinski
d6a48218ee
STM32F3: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:26:20 +02:00
Filip Jagodzinski
b88b94eb75
STM32L0: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:22 +02:00
Filip Jagodzinski
c387bd889f
STM32F0: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:17 +02:00
Filip Jagodzinski
84384162bb
STM32F7: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:07 +02:00
Filip Jagodzinski
94c27aa750
K64F: Fix serial IRQ handling
...
Check that the RX or TX interrupt is enabled before calling
a registered handler with RxIrq or TxIrq arg.
2019-06-07 15:17:07 +02:00
Lingkai Dong
3307c59610
Merge pull request #1 from paul-szczepanek-arm/nrf52_cordio
...
disable test
2019-06-07 13:57:50 +01:00
paul-szczepanek-arm
1fe06f18c3
exculde test
2019-06-07 13:50:30 +01:00
adbridge
366b18ea1f
Re-enable complilation for wifi and nanostack examples
2019-06-07 10:50:24 +01:00
Martin Kojtal
6a1ab73988
Merge pull request #10770 from Patater/update-to-mbedcrypto-1.1.0d1
...
mbed-crypto: Update to Mbed Crypto 1.1.0d1
2019-06-07 09:18:53 +01:00
d-kato
4dc3b0e269
Fix bugs by optimization
2019-06-07 11:14:03 +09:00
d-kato
4eca482061
tests-mbed_drivers-crc: Increase the task stack
2019-06-07 11:07:59 +09:00
Przemyslaw Stekiel
86dab2f9fa
Disable time drifting test cases.
...
Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
2019-06-06 21:48:04 +02:00
Chris Trowbridge
9a1309f5f8
Modify ME910 driver to follow power on/off best practices and add custom get_context() function
2019-06-06 14:29:15 -04:00
Vincent Veron
82979f6415
TARGET_STM: SPI: update pull up config depending on clk polarity
...
Fix #10589
Signed-off-by: Vincent Veron <vincent.veron@st.com>
2019-06-06 17:06:04 +02:00
Chris Trowbridge
0a717e435b
Add default soft/hard power on/off sequences for ME910
2019-06-06 10:26:51 -04:00
Chris Trowbridge
0d9facd921
Remove ME910 trace group #define
2019-06-06 10:26:50 -04:00
Chris Trowbridge
21a8ed8108
Remove ME910 flow control debug message
2019-06-06 10:26:50 -04:00
Chris Trowbridge
f0afd1f896
Remove unnecessary #includes
2019-06-06 10:26:50 -04:00
Chris Trowbridge
1a20ea11af
Remove default power on/off functions
2019-06-06 10:26:50 -04:00
Chris Trowbridge
841607d029
Add Telit ME910 driver
2019-06-06 10:26:50 -04:00
Marten Lootsma
aed0d054d7
Added support for SPIF of size bigger than 16Mbyte
...
- checks if size is bigger than 16Mbyte
- changes to 4 byte address mode of neccessary
2019-06-06 16:01:40 +02:00
Martin Kojtal
489bd10626
Merge pull request #10629 from trowbridgec/add-target-ep-agora
...
Add support for the Embedded Planet Agora target
2019-06-06 14:50:14 +01:00
Antti Kauppila
43b67459ae
Assert handling added
2019-06-06 13:12:29 +03:00
Lingkai Dong
6165204b15
Workaround for legacy GAP advertising issue on Cordio LL
...
Due to some issue in Cordio link layer, advertising data does not
take effect unless we set it (or set it again) after advertising
parameters are set.
2019-06-06 10:49:35 +01:00
Lingkai Dong
f78364cb5a
Set extended advertising parameters upon first use of API v2
...
Previously, extended advertising parameters failed to be set
during BLE initialisation when the stack was not ready.
To work around this, we delay it to the first use of
useVersionTwoAPI.
2019-06-06 10:49:04 +01:00
jeromecoutant
25e4316963
STM32H7 directory cleanup and refactoring
2019-06-06 10:48:11 +02:00
jeromecoutant
119ff51fee
STM32H7: use default files from ST drivers delivery
2019-06-06 10:48:09 +02:00
jeromecoutant
5b53b3aae0
STM32: define USE_FULL_LL_DRIVER at top level
2019-06-06 10:48:08 +02:00
Teppo Järvelin
2b9e1f3982
Fix networkinterface non-blocking status test
...
Fix was to add some time between iterations connect-disconnect.
In cellular disconnect, cellular network may send disconnect events
and if those events come when connect is already ongoing test will fail.
So wait a bit after disconnect so that disconnect events should be over.
2019-06-06 09:04:44 +03:00
panyz0725@thundersoft.com
ed81f8e428
Setting wisely pin mode for TT_M3HQ
2019-06-06 10:16:31 +08:00
Jaeden Amero
9676edd36b
mbed-crypto: Update to Mbed Crypto 1.1.0d1
2019-06-05 16:39:06 +01:00
Volodymyr Medvid
f4bfbf3056
PSOC6: add SOFTFP to standard component list
...
This allows Cypress to deliver middleware libraries with
precompiled libraries for SoftFP ahd HardFP, separated by
component-specific sub-directories:
COMPONENT_SOFTFP/TOOLCHAIN_GCC_ARM/libcy_capsense.a
COMPONENT_HARDFP/TOOLCHAIN_GCC_ARM/libcy_capsense.a
2019-06-05 16:32:16 +03:00
Przemyslaw Stekiel
c325dbc695
Fix GREENTEA_SETUP() call in not time drifting tests.
...
In these tests GREENTEA_SETUP() is incorrectly called with "timing_drift_auto" instead of "default_auto".
2019-06-05 13:32:13 +02:00
Martin Kojtal
2b354a40b0
Merge pull request #10755 from maciejbocianski/fix_qspi_hal_test_code
...
hal_qspi_test: undo buggy code
2019-06-05 11:43:23 +01:00
toyowata
f1628f0b8d
Correct SPDX identifiers
2019-06-05 19:04:55 +09:00
Lingkai Dong
3373c5d24a
NORDIC_CORDIC pal_crypto: check if cryptocell310 is enabled
...
The config "cryptocell310-acceleration" is set by MCU_NRF52840
but individual targets may have crytocell310 feature disabled.
2019-06-05 09:53:53 +01:00
Lingkai Dong
977eea4447
critical_section tests: do not check APP interrupts on NRF52
...
APP interrupts are masked on SoftDevice BLE stack only, but we
have switched to Cordio stack on NRF52 targets.
2019-06-05 09:53:53 +01:00
Lingkai Dong
ffcceb0cb7
Default to Cordio BLE stack for NRF52* targets
...
The BLE stack from SoftDevice is not actively maintained and
has issues when used with Nordic SDK v15.
2019-06-05 09:53:53 +01:00
toyowata
9acf2c325c
Fix device_name and add SPDX identifiers
2019-06-05 16:48:08 +09:00
toyowata
f0a06b24ba
Remove ARCH_MAX files from STM32F407xG
2019-06-05 14:51:06 +09:00
toyowata
db2cac45f1
Move Seeed ARCH_MAX to TARGET_STM32F407xE MCU
2019-06-05 14:35:25 +09:00
Martin Kojtal
fbc489e6a5
Merge pull request #10733 from pan-/fix-nrf52-memory-pools
...
Fix nrf52 memory pools
2019-06-04 21:01:15 +01:00
petroborys
b2b8956a0a
Merge branch 'master' of https://github.com/petroborys/mbed-os
2019-06-04 14:33:14 +00:00
petroborys
54fe348078
Add support I2C 3 (#ifdef I2C2) for target EFM32G11
2019-06-04 14:31:33 +00:00
petroborys
c685b6e242
Add support I2C #3 (#ifdef I2C2) for target EFM32G11
2019-06-04 14:27:15 +00:00
Marten Lootsma
ed36cc4e06
Add trace logging with size of block device
2019-06-04 16:03:56 +02:00
Marten Lootsma
5484f585a6
Cleaned up SPIF trace log.
...
- Test most SPIF log to DEBUG level.
- Removed DEBUG/ERROR/INFO tags.
- Removed not needed line endings.
2019-06-04 16:03:56 +02:00
Vincent Coubard
618e1e623e
Cordio: Fix default COC parameters.
...
The stack doesn't cope with zero COC client or channel on IAR.
2019-06-04 14:45:45 +01:00