CellularContext member variables were initialized in inheriting class.
Now in base class where they should be initialized so that every inheriting
class don't have to init them.
Socket ID is usually spitted out by the modem, however there are cases
when the modem is actully taken in as an input argument, e.g., in the
case of QUECTEL M26 modem. This minor knit clarifies that the
CellularSocket::id can be an input argument.
Disconnect was sent to all CellularContext classes even it concerned
one specific context. Some disconnect events are still sent to all
context classes. These event are coming from network and ment for all
context classes or event did not specify cid.
CellularDevice::get_default_instance() is a weak method and is overriden
by either a default construction provided in the code or by application
at some stage. This method needs to be flagged otherwise using another
driver will be hindered by the default overriding of this driver.
Using malloc will require us to add stdlib.h somewhere in the path for
the application. Maybe the CI apps are adding stdlib.h and that's why
the code would have worked. In a custom app, it can happen that the
header is not included. Using new avoids the need to add stdlib.h
anywhere and it is more in line with C++.
For default construction of the driver, it would be necessary to define
the pins. However as we don't know the correct pins, until/unless user
sets them up for us. So it makes sense to mark the pins as NC. It would
be easier to debug if the pins are set to NC if user forgot to set them
up.
To make this driver more useful, we needed to do some changes. The
wirings for the modem can differ on the board so we also need to be
flexible in our approach.
It is now mandatory to provide the power pin and pin polarity in the
constructor alongwith the file handle. Reset pin is optional.
Standard 3GPP TS27.007 states that the AT+CGSN command can optionally
have type parameter that determines the output. However Quiectel EC2X
series doesn't accept parameters. We need to reflect that in the
cellular properties setup.
Provides basic power up / power down sequences for Quectel EC2X series
modems. Can be used in PPP mode. For using the on-board IP stack, we
will need to add and implement classes that provide context.
Driver constructor takes power and reset control pins along with the
FileHandle. A default construction is provided which can be chosen by
the application in its mbed_app.json. Otherwise the user is free to
construct as per demand.
Original AT traces had several issue:
- Can be overwritten by other traces (printf/mbed-trace)
- No way to know which direction message was going (TX or RX)
- <cr> and <ln> characters were not visible in trace
etc.
This commit addresses those issues using mbed-trace and showing separately
each filehandle write and read.
State machine has retry logic until device is attached to network.
After this CellularContext does the context activation e.g. connect.
There was no retry logic for context activation. Added logic to
CellularContext level so it's available for at and (upcoming)ril layers.
When using NetworkInterface::get_default_instance() application gets handle
to CellularInterface which is actually CellularContext derived from CellularInterface.
Application needs also handle to CellularDevice to open other interfaces.
Simplified state machine by removing manual registering state.
This was done as some modems did not have all the needed at commands
for checking the registered network. Some modem run out of memory as when
checking correct network there might be so many networks available.
Manual registration still works but it does not do any checks to which network
it's registered. Moved manual registering at command earlier in state machine so it forces
registering to a correct network. Internal refactor/fix, does not affect applications.
This was left accidentally after refactoring.
It wasn't giving correct states after refactoring.
CellularContext::get_connection_status should be used instead.
Fix syncing back to at mode after ppp disconnect.
Fix AT_CellularContext flags and states to allow new connect after disconnect.
Fix that state machine is not reseted in disconnect is it's running (might be
running because of another context or new connect already started).
There are two EventQueue.h in mbed-os codebase:
events/EventQueue.h
features/FEATURE_BLE/ble/pal/EventQueue.h
By accident, `mbed compile` generates includes.txt with the correct
order of include search paths. This is not the case for the CMake
exporter: targets with FEATURE_BLE enables fail to compile with errors:
mbed-os/features/cellular/framework/AT/ATHandler.h:99:60: error:
'events' has not been declared
Update all places to always include either "events/EventQueue.h"
or "ble/pal/EventQueue.h": to always find the correct header.
Added Multihoming feature to LWIP (ability to use more than one network interfaces) for increasing networking reliability.
This involves:
LWIP interface
LWIP IP routing
DNS storage
Sockets (bind to interface name possibility)
possibility to add non default network interface
cellular middleware modifications if cellular connection is used
It was decided to retire CellularBase class which served as a pure
virtual interface class from which Cellular network stack
implementations would get inherited. However, the current view is that
we may be the only user of it so we could retire CellularBase.
Information removed from the cellular subsystem trace log:
* SIM pin
* APN username and password
Added get_debug() to ATHandler.h to get the current trace state in order
to support suspend/resume of trace output.
Fix this build warning seen when building with ARMCC
Compile [ 13.7%]: UBLOX_AT_CellularNetwork.cpp
[Warning] UBLOX_AT_CellularNetwork.cpp@65,0: #111-D: statement is unreachable
Fix the following warning seen when built with GCC_ARM with mbed-cli v1.8.3
$ mbed compile -c -t GCC_ARM -m K64F
<snip>
[Warning] QUECTEL_M26_CellularStack.cpp@364,9: variable 'sent_acked' set but not used [-Wunused-but-set-variable]
<snip>
_sim_pin was changed to pointer from array and length was checked with
strlen. If _sim_pin was null it caused crash. Fix by checking _sim_pin against NULL.
Power class could have been called without checking if power is NULL. Fix by checking
that power class is not null.
Fix state machine to return correct states when queried.
Generic cellular module (GENERIC_AT3GPP) can by used as a default
module when porting new cellular module. It's a good starting point
and eases porting of new modules. GENERIC_AT3GPP uses only standard
3GPP AT commands when communicating with the modem.
Change usage of AT_CellularContext::stack_type_supported to
AT_CellularBase::get_property. This way we can rid of
targets overriding stack_type_supported and delete
unnecessary classes and simplify new targets.
After AT_CellularNetwork::has_registration was replaced with
CellularProperties and better
AT_CellularNetwork::set_access_technology_impl default
implementation we can delete most of the target specific classes
that inherit AT_CellularNetwork.
-added an API for checking network eps ciot optimization support
-renamed the API for getting the UE parameters
-the API for setting the UE parameters includes now a callback, which
will be called once network support for eps ciot optimization is known
Moved methods to classes CellularDevice and CellularInformation.
SIM interface was removed to simplify cellular usage and
methods better suite new classes.
Updated greentea and unit tests.
The helper method call_network_cb, actually does a lot more than calling
the callback. The method has a check that the network status supplied
for the callback is different compared to the internal one. It also sets
the class member if it is changed. This is a bit surprising, given the
name of the method. It also means that it doesn't work in this call, as
the member is already set.
Add override for the virtual method get_connection_status() inherited
from NetworkInterface. The method in the base class returns
NSAPI_STATUS_ERROR_UNSUPPORTED. The CellularContext has the member
_connection_status, which means that we could return this.
Added check to state machine that if modem is attached to a network
it is considered to be registered to a network and state machine
can continue to next states. This fixed issues seen in IoT network
that network does not allow registering if already attached.
In QUECTEL_BG96 and QUECTEL_BC95 there was missing #ifdefs for
PPP mode and our stack was used. Also BG96 needed to be added
AT_CellularBase::AT_CGDATA as not supported.
If sequence from buffer contains tag but symbol before tag is same as
first symbol of the tag, then the tag wasn't detected.
For example, "\r\n" tag was not found from "\r\r\nOK" sequence.
Anna Bridge
Kimmo Vaisanen
Pekka Pesu
Martin Kojtal
kevin.ong
Teppo Järvelin
Ari Parkkila
Martin Kojtal
Mirela Chirica
Hasnain Virk
Chris Trowbridge
Cruz Monrreal
mudassar-ublox
Teemu Kultala
Sebastian Stockhammer
Sarah Marsh
Wajahat Abbas
Volodymyr Medvid
Tymoteusz Bloch
Tymoteusz Bloch
Jari Poyhonen
Naveen Kaje
Neil MacMullen
Nir Sonnenschein
Seppo Takalo
Oscar Hellström
Fahim Alavi
Terence Zhang
Amanda Butler
Michal Paszta