ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
10,826 Commits
52 Branches
336 Tags
628 MiB
Commit Graph

549 Commits (b51fbe817bfd7810af562103afdf592da182a812)

Author SHA1 Message Date
Hasnain Virk ccbf00571f Introducing hal/modem_api.h 
This provides a HAL layer for Modem bearing devices.
Provides a standard interface to upper layer drivers.
Platform providers will be implementing this API under their
specific targets.

As a reference, two implementations are provided under TARGET_C027 (UBLOX)
and TARGET_MTS_DRAGONFLY_F411RE (MultiTech).

targets.json now contains a tag "MODEM" which tells that this target
has a modem and the modem_api is protected by a flag DEVICE_MODEM
(following the DEVICE_SERIAL fashion ).
 2017-05-31 15:02:11 +03:00
Hasnain Virk fcbcfafec5 Preparing grounds for modem api 
* Lays down ground for mbed modem_api
* Standardizes pin names relating to modem device for UBLOX C027 and MTS_DRAGONFLY_F411RE
  devices
* Ublox modem api is changed to use a standard, platform independent name so that same
  api could be used with multiple ubloc modems.
* DCD Polarity macro is added to assist the driver in knowing correct polarity
 2017-05-31 15:02:11 +03:00
Hasnain Virk 925f54bfce Heap size reduced to 64k for IAR 
IAR heap sizes were hard configured to be 96k which is 75% of the
total RAM available. Reduced it to be 64k which is half of the available RAM.
 2017-05-31 15:02:11 +03:00
Anna Bridge 45b4d41bbd Merge pull request #4329 from adustm/can_sync_error 
Fix for #3863: STM Check can sync error
 2017-05-30 16:52:09 +01:00
Anna Bridge 9c6a068d48 Merge pull request #4324 from monkiineko/master 
STM32F3: Remove dependence upon a specific flash vector table location
 2017-05-30 16:50:45 +01:00
adustm 6770678811 Fix another typo 2017-05-29 10:24:03 +02:00
adustm 795bfd2288 Fix coding style 2017-05-29 10:24:03 +02:00
adustm b99ccf65bd Add timeout also on the 1st while loop 2017-05-29 10:24:03 +02:00
adustm 9a1d05551b Optimize the use of the status value 2017-05-29 10:24:03 +02:00
adustm 897625cc96 Give access to HAL_GetTick function 2017-05-29 10:24:03 +02:00
adustm 52d38a1be0 Handle can_frequency sync error 
add a timeout + return an error message
 2017-05-29 10:24:03 +02:00
Sam Grove 2561e0bff4 Merge pull request #4299 from jeromecoutant/PULL_REQUEST_CUBE_UPDATE_F4_V1.16.0 
STM32F4 cube update from v1.12.0 to v1.16.0
 2017-05-26 17:13:08 -05:00
Sam Grove 2500ab03f2 Merge pull request #4351 from jeromecoutant/PULL_REQUEST_CUBE_UPDATE_L4_V1.8.0 
STM32L4 cube update from v1.5.0 to v1.8.0
 2017-05-26 16:58:37 -05:00
Sam Grove c74013e932 Merge pull request #4383 from snelson-senet/master 
#4354 Fix MOTE_L152RC GPIO Write
 2017-05-26 16:27:25 -05:00
Sam Grove d11289b576 Merge pull request #4165 from adustm/can_init 
fix #3863 Add an mbed API that allows the init of the CAN at the bus frequency
 2017-05-26 10:45:19 -05:00
Shaun Nelson 30579e8131 4354 Fix MOTE_L152RC GPIO Write 
Add #define GPI_IP_WITHOUT_BRR
 2017-05-24 11:37:15 -04:00
jeromecoutant 5dc49b7d6c STM32L4 replace deprecated macro name 2017-05-19 11:59:38 +02:00
Martin Kojtal 5d0ce3c531 Merge pull request #4338 from andreaslarssonublox/ublox_odin_driver_os_5_v1.3_rc2 
u-blox ODIN driver v1.3 rc2 for mbed OS 5
 2017-05-19 08:42:14 +01:00
Sam Grove a2a1581e2e Merge pull request #4263 from Pliny/master 
stm32f4xx: Consider all DMA ready/busy states in conditionals
 2017-05-19 01:45:00 -05:00
jeromecoutant 0178969e90 STM32Cube_FW_L4_V1.8.0 
CMSIS v1.1.1 => v1.3.1
    STM32L4 HAL v1.5.1 => v1.7.1
 2017-05-18 14:36:32 +02:00
andreas.larsson e563fd477a Updated ODIN driver binaries for v1.3 rc2 2017-05-17 23:14:57 +02:00
andreas.larsson e177bcfd1f Refactored the driver class 2017-05-17 23:13:29 +02:00
andreas.larsson e0de402c77 Added BD_ADDR macros 2017-05-17 23:13:14 +02:00
andreas.larsson dcc303225c Added quality of service functions 2017-05-17 23:12:54 +02:00
andreas.larsson db2623d318 Added cbBSM_setStaticLinkKeyNvdsId 2017-05-17 23:12:19 +02:00
andreas.larsson 9e61a52c12 Added cbHW_setSysTickMode 2017-05-17 23:12:05 +02:00
andreas.larsson 233b92ce3f Added cbSTATUS_RECEIVE_DATA_MODE + macros 2017-05-17 23:11:50 +02:00
andreas.larsson fba7b7f6c1 Fixed startHandle type for cbGATT_addService 2017-05-17 23:11:25 +02:00
andreas.larsson 358fa5d564 Minor comment fixes 2017-05-17 23:11:01 +02:00
andreas.larsson 8d4e602313 Moved stream interface to cb_cert_utils.h 2017-05-17 23:10:25 +02:00
andreas.larsson 27f5806c37 Moved stream interface to cb_cert_utils.h 2017-05-17 23:09:42 +02:00
Bradley Scott 2f73d3b4a7 STM32F3: Remove dependence upon a specific flash vector table location 
The STM32F3 cmsis_nvic code is currently checking for a specific flash
address when determining if the vector table is in flash or RAM.  By
changing the test to instead see if the vector table base is NOT set to
the RAM address, it simplifies the code, and removes the dependency on
the flash vectors being located at a specific address.  This becomes
important when adding a custom boot loader, which requires that the
flash vector table location in the mbed project be at a different
address.
 2017-05-15 14:20:50 -04:00
Martin Kojtal cb3531c438 Merge pull request #4305 from LMESTM/fix_increase_stm32_spi_timeout 
Increase stm32 timeout for spi transfers
 2017-05-15 16:22:59 +01:00
Martin Kojtal a75b29bcac Merge pull request #4296 from LMESTM/dev_stm32_hal_F1_V1.5.0 
Dev stm32 hal f1 v1.5.0
 2017-05-15 16:20:51 +01:00
Martin Kojtal 1705d10790 Merge pull request #4272 from jeromecoutant/PR_F429_D11 
STM32 NUCLEO boards with Ethernet connector: solve conflict with D11 arduino pin
 2017-05-15 16:12:06 +01:00
Martin Kojtal d98da4089a Merge pull request #4231 from jamike/USBH0ST_TARGET_STM_HUB_SUPPORT 
USBHOST hub support for TARGET_STM
 2017-05-15 16:01:34 +01:00
adustm a769d2b6a5 add comment in peripheral pin of DISCO_L476VG so that 
the user is aware of conflicts
 2017-05-15 15:06:29 +02:00
adustm 577a0d972b STM targets: the free irq function was not well implemented 
the index of the table was out of range
 2017-05-15 14:27:22 +02:00
adustm 9115dd9b98 Add can_init_freq for STM devices 2017-05-15 14:27:22 +02:00
Dave Desrochers 42f66eec60 stm32f4xx: Revert #3424 
According to @betzw, #3424 was put in for I2S with DMA.  However, the latest I2S library now works without this patch.

The changes in DMA HAL for this potentially introduced corner case
scenarios. So it's best to revert the DMA changes.
 2017-05-12 10:11:08 -07:00
jeromecoutant 92c55e7f31 Correct compilation issue 2017-05-12 15:38:25 +02:00
Laurent MEUNIER 7d17532911 STM32 SPI do not use a timeout for spi transfers 
Default timeout of 10ms was reported as an issue in #4300

There seems to be conditions or use cases where the system is loaded with
higher priority tasks so that SPI transfer would be delayed more than 10ms.
Recommendation from MBED team is to not implement any timeout at all as
there is no defined API in MBED to inform application of error cases.
 2017-05-12 11:25:47 +02:00
Bartosz Szatkowski 14cfe8bac8 Limit ISR stack to 4k on NUCLEO_F429ZI 2017-05-11 18:11:36 -05:00
jeromecoutant 927cba8fa5 STM32F4: remove deprecated macro 2017-05-11 12:38:49 +02:00
Laurent MEUNIER c98342eaa1 Fixing Typo in MACRO 2017-05-11 09:20:39 +02:00
jeromecoutant 00163067fb STM32 NUCLEO boards with Ethernet connector: solve conflict with D11 arduino pin 
If you are using Ethernet, and not SPI Arduino pins:
=> keep your board with the default configuration

If you are using SPI Arduino pins, and not Ethernet:
=> you should remove the JP6 bridge on the front side of the board

If you need SPI Arduino and Ethernet:
=> you have to patch the NUCLEO board on the back side: set solder bridge SB121 to off, and SB122 to on
=> D11 is no more connected to PA_7 but to PB_5
=> overwrite d11_configuration config value in json file
 2017-05-10 11:15:14 +02:00
jeromecoutant 39d981cf70 STM32Cube_FW_F4_V1.16.0 
CMSIS v2.5.0 => v2.6.1
STM32F4 HAL v1.5.0 => v1.7.1
 2017-05-10 10:00:42 +02:00
Laurent MEUNIER 943035a159 STM32 F1: update state check in Serial after HAL update 
The states definition in HAL have changed so F1 driver needs updates
accordingly (as done previously on other families)
 2017-05-09 16:48:36 +02:00
Laurent MEUNIER 675d78d180 STM32 remove usage of deprecated MACROs 2017-05-09 16:48:34 +02:00
Michel Jaouen c581230cd3 USBHOST: TARGET_STM fix in hal for hub support 2017-05-09 16:18:33 +02:00