Major changes:
- Dependency to FileHandle removed from base classes
- AT_CellularDevice owns the default FileHandle and shares it with AT -classes
- Hang-up -detection moved as CellularContext::configure_hup(). Cannot be configured via CellularDevice any more.
Result on NRF52840_DK + BG96:
GCC:
Total Static RAM memory (data + bss): 29360(+296) bytes
Total Flash memory (text + data): 130660(-832) bytes
ARM:
Total Static RAM memory (data + bss): 261554(+8) bytes
Total Flash memory (text + data): 127573(-1193) bytes
IAR:
Total Static RAM memory (data + bss): 25479(+296) bytes
Total Flash memory (text + data): 102418(-527) bytes
RAM increase is because now ATHandler is no longer created with new -operator but is now member of AT_CellularDevice,
so image tool is able to count it. Actually total RAM consumption has decreased due to removed variables.
Add a missing license header.
Remove semaphores and add +CRTDCP to support async operation.
Fix delete context and disconnect to execute just once.
Add support for NONIP PPD type.
Change CellularNetwork::clear() to virtual so it can be overridden.
Removed CellularBase and AT_CellularBase from cellular stack and updated both code and unittests accordingly.
Moved property handling into AT_CellularDevice
A new API `CellularDevice::clear()` to clean-up the modem to a default initial state.
Function is virtual so it can be overridden. The default implementation clears all PDP contexts,
but the the first one if that has APN defined as `nsapi.default-cellular-apn`.
CellularStateMachine calls `clear()` to clean-up the modem on initial `connect()`,
if the flag `cellular.clear-on-connect: true` is defined.
Disconnect was sent to all CellularContext classes even it concerned
one specific context. Some disconnect events are still sent to all
context classes. These event are coming from network and ment for all
context classes or event did not specify cid.
Simplified state machine by removing manual registering state.
This was done as some modems did not have all the needed at commands
for checking the registered network. Some modem run out of memory as when
checking correct network there might be so many networks available.
Manual registration still works but it does not do any checks to which network
it's registered. Moved manual registering at command earlier in state machine so it forces
registering to a correct network. Internal refactor/fix, does not affect applications.
This was left accidentally after refactoring.
It wasn't giving correct states after refactoring.
CellularContext::get_connection_status should be used instead.
Fix syncing back to at mode after ppp disconnect.
Fix AT_CellularContext flags and states to allow new connect after disconnect.
Fix that state machine is not reseted in disconnect is it's running (might be
running because of another context or new connect already started).
Change usage of AT_CellularContext::stack_type_supported to
AT_CellularBase::get_property. This way we can rid of
targets overriding stack_type_supported and delete
unnecessary classes and simplify new targets.
After AT_CellularNetwork::has_registration was replaced with
CellularProperties and better
AT_CellularNetwork::set_access_technology_impl default
implementation we can delete most of the target specific classes
that inherit AT_CellularNetwork.
-added an API for checking network eps ciot optimization support
-renamed the API for getting the UE parameters
-the API for setting the UE parameters includes now a callback, which
will be called once network support for eps ciot optimization is known
Updated cellular debug trace prints:
- Removed unnecessary prints.
- Tracing more in DEBUG level.
- Read/write bytes not printed on big packets.
- Signal quality (RSSI) traced to log network problems.
- Dismissed AT data is traced.
- Modem type and firmware version are traced.
Network registration returns NotRegistered instead of StatusNotAvailable,
because that's not in 3GPP TS 27.007.
CellularDevice class own new state machine. Now we don't have to expose state machine
which may change and so we don't have to make API changes if that happens.
EasyCellularConnection uses now CellularDevice instead of old state machine.
Martin Kojtal
Ari Parkkila
Kimmo Vaisanen
Kevin Bracey
Lin Gao
Antti Kauppila
jeromecoutant
Teppo Järvelin
Teemu Kultala
Mirela Chirica
Cruz Monrreal