108ec44b66
ESP8266: fixes UART HW flow control enabling sequence
2019-02-14 10:41:04 +02:00
71e5321f0f
ESP8266: fixes network status refresh procedure
2019-02-14 10:41:04 +02:00
876a397101
ESP8266: handles reset ready as OOB
...
Makes possible to recover from spurious resets addiotionally to planned
ones.
2019-02-14 10:41:04 +02:00
6a184da381
ESP8266: connect() can handle ESP's errors.
...
ESP8266Interface::connect() checks the exact return value from
the underlying ESP8266::connect() call.
Increased timeout for network-wifi greentea tests to 6 minutes.
2019-02-11 17:20:14 +02:00
f1bf5dbd63
Merge pull request #9520 from VeijoPesonen/bugfix-esp8266_reduce_sigio
...
ESP8266: reduces SIGIO signaled to the upper layers
2019-02-01 08:23:35 +01:00
b506b03055
Merge pull request #9456 from VeijoPesonen/feature-esp8266_mbed_error_if_wdt
...
ESP8266: calls MBED_ERROR if modem's watchdog reset gets triggered
2019-01-31 10:51:38 -06:00
53c2879a5c
ESP8266: makes guarding variable for deferring events atomic
2019-01-30 17:00:56 +02:00
7d3621dae4
ESP8266: reduces SIGIO signaled to the upper layers
2019-01-30 17:00:56 +02:00
d712568b8f
ESP8266: with empty packet send returns zero if TCP, unsupported otherwise
2019-01-28 13:46:48 +02:00
832eed02ce
ESP8266: calls MBED_ERROR if modem's watchdog reset gets triggered
2019-01-22 16:11:32 +02:00
c4d96e6309
ESP8266: provides blocking/non-blocking connect
...
Implements NetworkInterface::set_blocking() and implements the
functionality to distinguish between the two in connect()
2019-01-21 16:22:53 +02:00
58c1a88348
ESP8266: turns connect fully to non-blocking mode
...
Blocking mode connect is not supported anymore when this patch is
applied
2019-01-21 16:22:53 +02:00
c60c5244c1
ESP8266: makes connect() connection status aware
2019-01-21 14:43:35 +02:00
30e0d8f1f6
Merge pull request #9366 from VeijoPesonen/bugfix-esp8266_verify_rcvd_data_len
...
ESP8266: add an error check for data overflow from modem side
2019-01-17 21:52:11 -06:00
b59b93e828
Merge pull request #9331 from VeijoPesonen/bugfix-esp8266_udp_prevent_would_block
...
ESP8266: prevent WOULD BLOCK from TX if UDP
2019-01-17 12:41:42 +01:00
a180d69e60
Merge pull request #9356 from VeijoPesonen/bugfix-esp8266_disconnect_return_code
...
ESP8266 - fixes disconnect to check the state from modem
2019-01-15 10:38:40 +01:00
02cd9f1884
[ESP8266] adds an error check for data overflow from modem side
2019-01-14 12:22:41 +02:00
e83b883e08
[ESP8266] fixes disconnect to check the state from modem
...
Additionally to internal bookkeeping lets check from the modem
that what is connection state in disconnect. There might be
inconsistencies.
2019-01-11 16:25:26 +02:00
7db2292417
Flush ESP8266 serial input buffers after HW reset
2019-01-10 18:13:32 +02:00
e9ceff2450
[ESP8266] fixes a debug print
2019-01-10 14:33:15 +02:00
9a3c9a30b3
[ESP8266] Drop signalling SIGIO artificially if UDP send fails
...
With TCP it's desirable that SIGIO wakes up the application to check
if there is buffer space space available on the mode. With UDP the
behavior is not acceptable as we don't know if the other endpoint is
there as connection establishment is missing. Hence buffers might
stay full forever.
2019-01-10 14:33:15 +02:00
e25611aad8
Merge pull request #9309 from VeijoPesonen/bugfix-esp8266_send_busy
...
ESP8266 - fix send buffer exhaustion handling
2019-01-10 12:24:09 +00:00
b9d5dceb72
Merge pull request #9284 from VeijoPesonen/bugfix-esp8266_socket_close
...
ESP8266: Fixes AT-layer socket_open-functions
2019-01-09 13:47:46 -06:00
7c112b2843
[ESP8266] socket_send() returns WOULD_BLOCK if server won't accept
...
Driver must return NSAPI_ERROR_WOULD_BLOCK if a server won't accept
data from the modem and the modem's buffers are full. In case that
socket is closed driver returns NSAPI_ERROR_CONNECTION_LOST.
2019-01-09 16:34:25 +02:00
4a9f86565a
[ESP8266] Fixes AT-layer socket_open-functions
...
When a socket open fails it musn't be treated as fatal error. Returning
a device error which is then handled by an application is the correct
solution
2019-01-09 13:20:52 +02:00
8bf3ce3d68
ESP8266: Set HW reset time to 2ms
2019-01-08 18:18:46 +02:00
034c72e12c
Prevent ESP8266 stopping HW control on init
2018-12-20 13:22:13 +01:00
6210805696
Fix ESP8266 "Link Type" errors after reset
...
As part of the ESP8266 connect sequence, ESP8266Interface::connect,
a software reset is performed. If the ESP8266 had been connected
previously then the ESP8266 will sometimes send a "WIFI DISCONNECT" OOB
message before performing the software reset. This causes the
ESP8266::_oob_connection_status to change its state (_conn_status) from
NSAPI_STATUS_DISCONNECTED to NSAPI_STATUS_CONNECTING. This causes
ESP8266Interface::_startup, called later in the boot seqeunce, to skip
ESP8266::startup. Without this call socket mux mode (CIPMUX=1) is never
enabled and all send commands using this format fail with a "Link Type"
error.
This patch fixes that problem by unconditionally calling
ESP8266::startup as part of the ESP8266 connect sequence.
2018-12-17 10:11:52 -06:00
d6e385b330
ESP8266 send returns WOULD_BLOCK error when busy
2018-12-11 17:48:37 +01:00
e4de165a32
[ESP8266] Fixes namespace collision
2018-12-11 09:49:23 +02:00
02aeab29d3
[ESP8266] powers down the modem on disconnect
2018-12-11 09:49:23 +02:00
8415e49835
Fixes connect, and network-status logic
2018-12-11 09:49:23 +02:00
12fa3e59bb
Fixes AT command timeout values from reset&connect
2018-12-11 09:49:23 +02:00
9857ee1c17
[ESP8266] Adds support for controlling HW reset of the modem from the driver
...
While connecting will run HW reset for the modem if reset wire is attached to a know pin.
2018-12-11 09:49:23 +02:00
61ade84447
Merge pull request #8875 from deepikabhavnani/fix_components
...
Add dependency checks to components
2018-12-10 19:20:30 -06:00
be817bab44
Merge pull request #8853 from VeijoPesonen/feature-esp8266_reconnect2
...
Reports NSAPI_STATUS_CONNECTING when trying to reconnect
2018-12-05 10:37:17 +01:00
c384119576
ONME-4007: Fix mbed_lib link from ESP8266 Readme.md
...
ONME-4007: Fix mbed_lib link from ESP8266 Readme.md
2018-12-04 10:27:17 +02:00
b52c164028
Merge pull request #8911 from c1728p9/esp8266_flow_control_fix
...
Fix ESP8266 recv_udp timeout with flow control
2018-12-03 13:41:23 +01:00
0d0740f17e
Merge pull request #8890 from michalpasztamobica/esp8266_disconnect_no_connection
...
ESP8266 disconnect returns ERROR_NO_CONNECTION
2018-12-03 13:40:54 +01:00
76220fa89c
Add Serial + EventQueue dependency to ESP8266
2018-11-30 15:38:28 -06:00
53ed3f5c3d
Fix ESP8266 recv_udp timeout with flow control
...
UDP packets are always received as OOB data. Without checking for
new OOB data with a call to "_process_oob" then recv_udp never blocks.
If a UDP packet is not available then NSAPI_ERROR_WOULD_BLOCK is
returned. This causes mbed-os's DNS handling to always fail when
flow control is enabled.
This patch fixes recv_udp by always calling "_process_oob" regardless
of if flow control is enabled. This ensures that recv_udp follows the
timeout parameter and waits for new data to arrive.
2018-11-29 19:13:37 -06:00
eb9c688574
ESP8266 disconnect returns ERROR_NO_CONNECTION
2018-11-28 11:23:09 +01:00
b32c6ba2a5
Components if using RTOS modules should be enabled only when RTOS is present
...
Build failures were observed when rtos is ignored with .mbedignored.
Components dependent on RTOS should be guarded with MBED_CONF_RTOS_PRESENT
2018-11-27 13:55:59 -06:00
6c6ef87c19
Fix header files used in esp8266
...
"ns_types.h" results in build failure when networking feature is ignored with
.mbedignored. ESP8266 component should be enabled only when NSAPI is present.
2018-11-27 13:55:59 -06:00
e0924532e7
Reports NSAPI_STATUS_CONNECTING when trying to reconnect
2018-11-23 12:56:02 +02:00
fefef0d855
Truncates TCP stream and NACKs UDP datagram when sending too much data
...
ESP8266 maximum packet size when sending is 2048 bytes.
2018-11-23 12:22:20 +02:00
c0f9e65af6
Fixes return value check when calling ATCmdParser::read()
2018-11-22 15:57:46 +02:00
95511bc7eb
Dropping duplicate "using namespace mbed;"
2018-11-22 15:57:33 +02:00
1f4a1af6ed
Truncates data to be send to modem to 2048 bytes
2018-11-22 15:57:21 +02:00
f54b25073c
Drops std:: because string.h is included
2018-11-22 15:56:59 +02:00
934472be1d
esp8266 driver - don't set UART flow control if no support
2018-11-09 16:03:41 +02:00
8dd6a5d039
Add ESP8266 driver v1.7
2018-11-09 14:49:48 +02:00
9226c5873d
Merge pull request #8550 from deepikabhavnani/mbed_h_fixes
...
Add required namespace instead of relying on mbed.h
2018-10-30 08:47:04 -05:00
451cf7ccb3
Add required namespace instead of relying on mbed.h
...
mbed.h has 'using namespace mbed;', hence some of the files skip
adding required namespace to the code, it is always good to specify the
namespace around the elements in header and `using namespace` in
specific CPP files, instead of all
2018-10-25 12:43:59 -05:00
4f2645b3fc
incorrect doc was copy pasted
...
replaced with copydoc instead
2018-10-24 20:57:25 +01:00
273f7c6fd6
ESP8266: Fix compilation error when default interface is enabled
...
Compile [ 1.3%]: ESP8266Interface.cpp
[Error] ESP8266Interface.cpp@582,33: cannot declare static function inside another function
[Error] ESP8266Interface.cpp@583,13: cannot convert 'ESP8266Interface (*)()' to 'WiFiInterface*' in return
Failed to build library
2018-09-03 12:56:26 +03:00
fc5bf5986b
Add ESP8266 driver v1.6
2018-09-01 12:36:28 -05:00
Veijo Pesonen
Michal Paszta
Martin Kojtal
Cruz Monrreal
Seppo Takalo
Russ Butler
Deepika
Russ Butler
paul-szczepanek-arm
Juha Ylinen