406f9508d3
hal: add spdx license
2018-11-28 10:39:51 +00:00
23e6d50000
Add ticker suspend/resume API
...
Add an API to suspend and resume the ticker.
2018-08-17 09:29:40 -05:00
f62e1032af
Merge pull request #7600 from c1728p9/remove_unnecissary_low_power_ticker_rescheduling
...
Remove unnecessary low power ticker rescheduling
2018-08-16 13:37:01 -05:00
e69ecaab57
Don't reschedule ticker while dispatching
...
Wait until dispatching is finished before scheduling the next ticker
interrupt. This prevents unnecissary calls to set_interrupt from
periodic elements being added back.
This is particularly useful for the low power ticker on devices with
LPTICKER_DELAY_TICKS set to a non-zero value. This is because the low
power ticker cannot be reschduled immediately and needs to fall back
onto the microsecond ticker which temporarily locks deep sleep.
2018-07-25 23:24:12 -05:00
0f9ce651e7
Add ticker_free() function to the ticker interface.
2018-07-25 08:54:51 +02:00
483427a285
hal: astyle update
2018-06-29 10:36:36 +01:00
d35b29830b
Changed struct position to try to maintain binary compatibility
...
Changed comment because a lot of numbers are divisible by 2
2018-05-25 12:29:55 -05:00
1aaef7bc12
mbed_ticker_api remove specific case for 32768 in favor of all frequencies divisible by 2
2018-05-25 12:29:55 -05:00
fad67559ae
Merge pull request #5028 from c1728p9/ticker_api_changes
...
Update ticker to map closely to hardware
2017-10-13 09:18:02 -05:00
ec55b82acf
Update ticker to map closely to hardware
...
Allow tickers to specify their native frequency and number of bits.
This allows the conversion to happen in common code rather than in
each vendor's implementation.
2017-10-05 11:57:12 -05:00
b1ff37cdee
HAL: ticker_api: Fix outdated comment
2017-09-05 13:31:12 +02:00
10ea63b8e7
Ticker: add fire interrupt now function
...
fire_interrupt function should be used for events in the past. As we have now
64bit timestamp, we can figure out what is in the past, and ask a target to invoke
an interrupt immediately. The previous attemps in the target HAL tickers were not ideal, as it can wrap around easily (16 or 32 bit counters). This new
functionality should solve this problem.
set_interrupt for tickers in HAL code should not handle anything but the next match interrupt. If it was in the past is handled by the upper layer.
It is possible that we are setting next event to the close future, so once it is set it is already in the past. Therefore we add a check after set interrupt to verify it is in future.
If it is not, we fire interrupt immediately. This results in
two events - first one immediate, correct one. The second one might be scheduled in far future (almost entire ticker range),
that should be discarded.
The specification for the fire_interrupts are:
- should set pending bit for the ticker interrupt (as soon as possible),
the event we are scheduling is already in the past, and we do not want to skip
any events
- no arguments are provided, neither return value, not needed
- ticker should be initialized prior calling this function (no need to check if it is already initialized)
All our targets provide this new functionality, removing old misleading if (timestamp is in the past) checks.
2017-07-13 12:23:25 +01:00
7e2e80588d
Removed bad \ref tag, but left in the tag name. Updated old param names in gpio_api.h and added new params in ticker_api.h
2017-06-08 15:52:31 -05:00
aeffd738c7
ticker_api: Code clarification
...
* update_interrupt renamed into schedule_interrupt
* update_current_timestamp renamed into update_present_time
* ticker_event_queue_t::timestamp renamed into
* ticker_event_queue_t::present_time
* Fix doxygen comments in ticker_api.h
* Update comments internal comments in mbed_ticker_api.c
2017-05-16 10:37:35 +01:00
20149dfcf5
[HAL] Ad primitives for long lived timestamp to the ticker API.
...
- A new 64 timestamp type has been added: us_timestamp_t.
- Changed type of timestamp in ticker_events iinto us_timestamp_t.
- Event queue now have a to store a current, absolute timestamp.
- Add alternative versions of ticker_insert_event and ticker_read which accept
in input us_timestamp_t.
- Add documentation explaining the limitation and behavior of ticker_read and
ticker_insert_event.
2017-05-16 10:35:11 +01:00
f1a78027d3
Add tags to our code
2016-10-04 15:02:44 -05:00
15904b7544
restructure - Split hal into drivers+platform+hal
...
hal/common/AnalogIn.cpp -> drivers/AnalogIn.cpp
hal/api/AnalogIn.h -> drivers/AnalogIn.h
hal/api/AnalogOut.h -> drivers/AnalogOut.h
hal/common/BusIn.cpp -> drivers/BusIn.cpp
hal/api/BusIn.h -> drivers/BusIn.h
hal/common/BusInOut.cpp -> drivers/BusInOut.cpp
hal/api/BusInOut.h -> drivers/BusInOut.h
hal/common/BusOut.cpp -> drivers/BusOut.cpp
hal/api/BusOut.h -> drivers/BusOut.h
hal/common/CAN.cpp -> drivers/CAN.cpp
hal/api/CAN.h -> drivers/CAN.h
hal/api/CircularBuffer.h -> drivers/CircularBuffer.h
hal/api/DigitalIn.h -> drivers/DigitalIn.h
hal/api/DigitalInOut.h -> drivers/DigitalInOut.h
hal/api/DigitalOut.h -> drivers/DigitalOut.h
hal/api/DirHandle.h -> drivers/DirHandle.h
hal/common/Ethernet.cpp -> drivers/Ethernet.cpp
hal/api/Ethernet.h -> drivers/Ethernet.h
hal/common/FileBase.cpp -> drivers/FileBase.cpp
hal/api/FileBase.h -> drivers/FileBase.h
hal/api/FileHandle.h -> drivers/FileHandle.h
hal/common/FileLike.cpp -> drivers/FileLike.cpp
hal/api/FileLike.h -> drivers/FileLike.h
hal/common/FilePath.cpp -> drivers/FilePath.cpp
hal/api/FilePath.h -> drivers/FilePath.h
hal/common/FileSystemLike.cpp -> drivers/FileSystemLike.cpp
hal/api/FileSystemLike.h -> drivers/FileSystemLike.h
hal/common/I2C.cpp -> drivers/I2C.cpp
hal/api/I2C.h -> drivers/I2C.h
hal/common/I2CSlave.cpp -> drivers/I2CSlave.cpp
hal/api/I2CSlave.h -> drivers/I2CSlave.h
hal/common/InterruptIn.cpp -> drivers/InterruptIn.cpp
hal/api/InterruptIn.h -> drivers/InterruptIn.h
hal/common/InterruptManager.cpp -> drivers/InterruptManager.cpp
hal/api/InterruptManager.h -> drivers/InterruptManager.h
hal/common/LocalFileSystem.cpp -> drivers/LocalFileSystem.cpp
hal/api/LocalFileSystem.h -> drivers/LocalFileSystem.h
hal/api/LowPowerTicker.h -> drivers/LowPowerTicker.h
hal/api/LowPowerTimeout.h -> drivers/LowPowerTimeout.h
hal/api/LowPowerTimer.h -> drivers/LowPowerTimer.h
hal/api/PortIn.h -> drivers/PortIn.h
hal/api/PortInOut.h -> drivers/PortInOut.h
hal/api/PortOut.h -> drivers/PortOut.h
hal/api/PwmOut.h -> drivers/PwmOut.h
hal/common/RawSerial.cpp -> drivers/RawSerial.cpp
hal/api/RawSerial.h -> drivers/RawSerial.h
hal/common/SPI.cpp -> drivers/SPI.cpp
hal/api/SPI.h -> drivers/SPI.h
hal/common/SPISlave.cpp -> drivers/SPISlave.cpp
hal/api/SPISlave.h -> drivers/SPISlave.h
hal/common/Serial.cpp -> drivers/Serial.cpp
hal/api/Serial.h -> drivers/Serial.h
hal/common/SerialBase.cpp -> drivers/SerialBase.cpp
hal/api/SerialBase.h -> drivers/SerialBase.h
hal/common/Stream.cpp -> drivers/Stream.cpp
hal/api/Stream.h -> drivers/Stream.h
hal/common/Ticker.cpp -> drivers/Ticker.cpp
hal/api/Ticker.h -> drivers/Ticker.h
hal/common/Timeout.cpp -> drivers/Timeout.cpp
hal/api/Timeout.h -> drivers/Timeout.h
hal/common/Timer.cpp -> drivers/Timer.cpp
hal/api/Timer.h -> drivers/Timer.h
hal/common/TimerEvent.cpp -> drivers/TimerEvent.cpp
hal/api/TimerEvent.h -> drivers/TimerEvent.h
hal/api/Transaction.h -> drivers/Transaction.h
hal/api/can_helper.h -> drivers/can_helper.h
hal/.yotta_ignore
hal/CMakeLists.txt
hal/hal/analogin_api.h -> hal/analogin_api.h
hal/hal/analogout_api.h -> hal/analogout_api.h
hal/hal/buffer.h -> hal/buffer.h
hal/hal/can_api.h -> hal/can_api.h
hal/hal/dma_api.h -> hal/dma_api.h
hal/hal/ethernet_api.h -> hal/ethernet_api.h
hal/hal/gpio_api.h -> hal/gpio_api.h
hal/hal/gpio_irq_api.h -> hal/gpio_irq_api.h
hal/hal/i2c_api.h -> hal/i2c_api.h
hal/hal/lp_ticker_api.h -> hal/lp_ticker_api.h
hal/common/mbed_gpio.c -> hal/mbed_gpio.c
hal/common/mbed_lp_ticker_api.c -> hal/mbed_lp_ticker_api.c
hal/common/mbed_pinmap_common.c -> hal/mbed_pinmap_common.c
hal/common/mbed_ticker_api.c -> hal/mbed_ticker_api.c
hal/common/mbed_us_ticker_api.c -> hal/mbed_us_ticker_api.c
hal/module.json
hal/hal/pinmap.h -> hal/pinmap.h
hal/hal/port_api.h -> hal/port_api.h
hal/hal/pwmout_api.h -> hal/pwmout_api.h
hal/hal/rtc_api.h -> hal/rtc_api.h
hal/hal/serial_api.h -> hal/serial_api.h
hal/hal/sleep_api.h -> hal/sleep_api.h
hal/hal/spi_api.h -> hal/spi_api.h
hal/hal/storage_abstraction/Driver_Common.h -> hal/storage_abstraction/Driver_Common.h
hal/hal/storage_abstraction/Driver_Storage.h -> hal/storage_abstraction/Driver_Storage.h
hal/hal/ticker_api.h -> hal/ticker_api.h
hal/hal/trng_api.h -> hal/trng_api.h
hal/hal/us_ticker_api.h -> hal/us_ticker_api.h
hal/api/mbed.h -> mbed.h
hal/api/CThunk.h -> platform/CThunk.h
hal/common/CallChain.cpp -> platform/CallChain.cpp
hal/api/CallChain.h -> platform/CallChain.h
hal/api/Callback.h -> platform/Callback.h
hal/api/FunctionPointer.h -> platform/FunctionPointer.h
hal/api/PlatformMutex.h -> platform/PlatformMutex.h
hal/api/SingletonPtr.h -> platform/SingletonPtr.h
hal/api/critical.h -> platform/critical.h
hal/common/mbed_alloc_wrappers.cpp -> platform/mbed_alloc_wrappers.cpp
hal/common/mbed_assert.c -> platform/mbed_assert.c
hal/api/mbed_assert.h -> platform/mbed_assert.h
hal/common/mbed_board.c -> platform/mbed_board.c
hal/common/mbed_critical.c -> platform/mbed_critical.c
hal/api/mbed_debug.h -> platform/mbed_debug.h
hal/common/mbed_error.c -> platform/mbed_error.c
hal/api/mbed_error.h -> platform/mbed_error.h
hal/common/mbed_interface.c -> platform/mbed_interface.c
hal/api/mbed_interface.h -> platform/mbed_interface.h
hal/common/mbed_mem_trace.c -> platform/mbed_mem_trace.c
hal/api/mbed_mem_trace.h -> platform/mbed_mem_trace.h
hal/common/mbed_rtc_time.cpp -> platform/mbed_rtc_time.cpp
hal/common/mbed_semihost_api.c -> platform/mbed_semihost_api.c
hal/api/mbed_stats.h -> platform/mbed_stats.h
hal/common/mbed_wait_api_no_rtos.c -> platform/mbed_wait_api_no_rtos.c
hal/common/mbed_wait_api_rtos.cpp -> platform/mbed_wait_api_rtos.cpp
hal/api/platform.h -> platform/platform.h
hal/common/retarget.cpp -> platform/retarget.cpp
hal/api/rtc_time.h -> platform/rtc_time.h
hal/api/semihost_api.h -> platform/semihost_api.h
hal/api/toolchain.h -> platform/toolchain.h
hal/api/wait_api.h -> platform/wait_api.h
2016-09-30 19:18:09 -05:00
Martin Kojtal
Russ Butler
Cruz Monrreal
Przemyslaw Stekiel
Marc Emmers
Jimmy Brisson
Filip Jagodzinski
Martin Kojtal
Kevin Gilbert
Vincent Coubard
Christopher Haster