bcec6455a6
target: arch_pro enable USBDEVICE support
2019-01-29 12:27:24 -06:00
977c571606
Fix USB tests
...
Change the direction used in set interface to match the USB
specification. This allows USB tests to pass on OSX.
2019-01-29 12:27:24 -06:00
c85f0dc249
Skip USB reset tests on OSX
...
OSX machines don't allow you to reset USB devices. Skip this test on
OSX so testing can still be used.
2019-01-29 12:27:24 -06:00
75a7e38e9e
Fix for USB set_clear_feature_test for OSX
2019-01-29 12:27:24 -06:00
4b4cea9f59
Update USBTester product name
...
Change the name reported by USBTester from CDC DEVICE to
MBED TEST DEVICE.
2019-01-29 12:27:24 -06:00
56e6b17757
Add pyusb to requirements
...
Add pyusb to requirements so the greentea USB tests work.
2019-01-29 12:27:24 -06:00
06250319cf
Add USBPhy template
...
Add a template for implementing a USBPhy.
2019-01-29 12:27:23 -06:00
8b0517de8e
Move USBPhy and related files to USB directory
...
Move the USBPhy header files into usb/device/USBPhy. Also move hal
and target USB files since mbed 2 does not compile when these files
are present without the USBPhy headers.
Directory restructure summary:
platform/USBPhy*
to usb/device/USBPhy/USBPhy*
hal/*
to usb/device/hal/*
targets/TARGET_Freescale/usb/*
to usb/device/targets/TARGET_Freescale/*
targets/TARGET_NXP/TARGET_LPC176X/usb/*
to usb/device/targets/TARGET_NXP/*
2019-01-29 12:27:23 -06:00
5f4e84a726
USB generic tests
2019-01-29 12:27:23 -06:00
b9f004fc87
Improve LPC1768 USB stability
...
Make the following changes to improve stability:
-When disconnecting set address to disabled to prevent nacks
-Clear EP_SLOW one and only once for every interrupt where it is set_address
-Disable and clear control endpoint interrupts when disconnecting
2019-01-29 12:27:23 -06:00
7e0a3fd8ec
Disable endpoints when disconnecting on Kinetis
...
Even thought the USB phy is disabled during disconnect, endpoints
still nack packets sent. This patch disables all endpoints so after
disconnect no USB traffic will be sent. This allows brief disconnects
of ~200us (or more) to be reliably detected by the host PC.
2019-01-29 12:27:23 -06:00
72cc182aa4
Limit USB control transfer size
...
Limit the size of control reads to the max packet size of endpoint
zero. This fixes the handling of large transfers.
2019-01-29 12:27:23 -06:00
c443a259dc
Correct Kinetis 256 byte ctrl transfers
...
Correctly handle control transfers which are a multiple of 256 bytes
by checking for a non-zero value in the upper byte of size.
2019-01-29 12:27:23 -06:00
0f2b808c88
Fix Kinetis endpoint initialization
...
Fully setup endpoint before enabling it in endpoint_add. This prevents
undefined behavior due to previous configuration.
2019-01-29 12:27:23 -06:00
58f49940e8
Remove the USB directory from mbed 2 travis
...
Don't include the USB directory when testing mbed 2 on travis.
2019-01-29 12:27:23 -06:00
58f9b02517
Update USBCDC and USBSerial
...
Update the USBCDC and USBSerial classes to the new API. This patch also
updates the blocking behavior to unblock at the appropriate times and
to let the processor sleep when blocking rather than busy waiting.
2019-01-29 12:27:23 -06:00
a6c249b223
Add USB utility classes
...
Add an allocation free linked list implementation. Additionally add
the class AsyncOp which provides blocking and wakeup funcionality
to simplify making asynchronous operations block.
2019-01-29 12:27:22 -06:00
cf6cbfec00
Update USBPhy doxygen
...
Update USBPhy doxygen to pull in handbook copyedits. Also update the
docs to reflect the enhanced USBPhy API.
2019-01-29 12:27:22 -06:00
392ceae16d
Update the Kinetis USB driver to the new API
...
Update this driver to match the new zero-copy API.
2019-01-29 12:27:22 -06:00
f30ecb77a3
Update the LPC17XX driver to the new API
...
Update this driver to match the new zero-copy API.
2019-01-29 12:27:22 -06:00
9b09f43f04
Update USBTester for the new USB API
...
Update the class USBTester so it works with the new zero-copy
USBDevice API.
2019-01-29 12:27:22 -06:00
b8995e8c29
Add abort API to USBDevice
...
Add the function endpoint_abort and ensure ongoing transfer are
aborted when an endpoint is removed.
2019-01-29 12:27:22 -06:00
3c42cd7bd1
Update USBDevice to reflect the updated USBPhy
...
Update USBDevice so the USB buffers are user supplied.
2019-01-29 12:27:22 -06:00
6b3d46893b
Update USBPhy to allow zero copy transfers
...
Update the USBPhy to allow for zero copy USB transfers on devices
which support it. This also aligns more closely with the CMSIS USB
driver model.
2019-01-29 12:27:22 -06:00
bf2dd81784
Call disconnect when uninitializing USB
...
Disconnect USB when uninitializing USB so it is in a well defined
state.
2019-01-29 12:27:22 -06:00
cb3c9d5ed7
Explicitly return when endpoint 0 is stalled
...
Stalling endpoint 0 indicates the end of a control transfer.
Return immediately when this occurs rather than continuing processing.
In particular, this patch prevents status from erroneously being
sent when _request_setup returns false inside _complete_request.
2019-01-29 12:27:22 -06:00
38ab9b502f
Allow transfer to start when configuring USB
...
Allow reads and writes to be started when entering the configured
state.
2019-01-29 12:27:22 -06:00
3dd9b7a8dc
Move USBDevice processing out of user callbacks
...
Perform processing triggered by user callbacks when USB is being
unlocked rather than synchronously. This prevents recursive callbacks
which reduces stack usage. This also prevents state change inside
the user callback which makes the code easier to reason about.
2019-01-29 12:27:21 -06:00
1730b497c9
Update stall state on set and clear feature
...
Call USBDevice::endpoint_stall/unstall in the request to set/clear
halt so the endpoint state is properly updated in the array
_endpoint_info.
2019-01-29 12:27:21 -06:00
22f1dbe14c
Fix USB init problems
...
Initialize the _transfer structure so the behavior is the same
regardless of prior memory contents. This fixes a hang during
USB testing when CI flags are used.
2019-01-29 12:27:21 -06:00
2c202ac224
Update USBTester for simplified read handling
...
Remove read_start and replace read_finish with read to match the new
USBDevice API.
2019-01-29 12:27:21 -06:00
679ca0dc0a
Change USBDevice read handling
...
Remove the USBDevice function read_start and automatically start all
reads internally in USBDevice. This patch also renames the function
read_finish to read.
2019-01-29 12:27:21 -06:00
a8ac294f34
Add and assert USB callback completion
...
Assert that when a callback is completed it is the active callback.
2019-01-29 12:27:21 -06:00
91d1707b3d
Update Kinetis USB to match the USBPhy API
...
Copy the Kinetis USB driver files from
mbed-os\features\unsupported\USBDevice\targets\TARGET_Freescale
and update them to match the new USBPhy API.
2019-01-29 12:27:21 -06:00
d3195af1d2
Add Kinetis USB files
2019-01-29 12:27:21 -06:00
411fae0bea
Remove mbed 2 USB tests from Travis
...
Remove the mbed 2 USB tests since USB support will be part of mbed 5.
2019-01-29 12:27:21 -06:00
d5f0d1a304
Add USBPhy for the LPC17xx
...
Move the LPC17xx USB driver files from
mbed-os\features\unsupported\USBDevice\targets\TARGET_NXP
and update them to match the new USBPhy API.
2019-01-29 12:27:21 -06:00
a9dccd4c94
Add USBDevice test code
...
Add a USB test and the class USBTester.cpp to go along with it.
2019-01-29 12:27:21 -06:00
c855577662
Update USBDevice and configure to use a USBPhy
...
Update the USBDevice class API so it matches mbed-os's naming
conventions, has a more robust API and uses USBPhy as its backend.
2019-01-29 12:27:20 -06:00
14b0c313ed
Update USB licenses and format code
...
Update USB licenses from MIT to Apache 2 and run astyle on the code.
2019-01-29 12:27:20 -06:00
61a575af23
Copy USBDevice from unsupported
...
Copy the USBDevice code out of unsupported and into a top level USB
folder in preparation for development.
squash
2019-01-29 12:27:20 -06:00
913c2e8502
Add USBPhy, USB HAL and Utility class
...
Add the USBPhy and USBPhyEvents abstract classes, the HAL header using
this class and the EndpointResolver utility class.
2019-01-29 12:27:20 -06:00
d1b367fbab
Merge pull request #9483 from mprse/ticker_sleep_lock_fix
...
Fix for Issue #7308 (Deep_sleep_lock Ticker.h Issue)
2019-01-29 09:27:12 +01:00
e965aa6640
Merge pull request #9509 from vmedcy/psoc6-daplink-hex
...
PSOC6.py: generate hex files with 16 bytes per row
2019-01-28 10:38:15 -06:00
66cda8a8fe
Merge pull request #9499 from bridadan/remove_yotta_modules
...
Remove unused yotta module metadata
2019-01-28 10:37:30 -06:00
545d229ab1
Merge pull request #9497 from ARMmbed/AnotherButler-patch-2
...
Remove yotta from README.md
2019-01-28 10:36:36 -06:00
953acef94c
Merge pull request #9482 from maciejbocianski/arch_pro_spi_pins
...
ARCH_PRO: add missing SPI pin definitions
2019-01-28 10:34:37 -06:00
f5730a91b2
Merge pull request #9474 from VeijoPesonen/fix-newlines_at_end-of-files
...
Fix newlines at end of files
2019-01-28 10:33:37 -06:00
7f8ebc75cd
Merge pull request #9466 from vmedcy/psoc6-target-hook
...
Improve PSoC 6 post-build hooks, whitelist makefile export
2019-01-28 10:33:12 -06:00
b49d949b50
Merge pull request #9393 from pan-/fix-safe-enum-type-safety
...
BLE: Fix SafeEnum type safety
2019-01-28 10:31:52 -06:00
Maciej Bocianski
Russ Butler
Russ Butler
Martin Kojtal
Cruz Monrreal