If sequence from buffer contains tag but symbol before tag is same as
first symbol of the tag, then the tag wasn't detected.
For example, "\r\n" tag was not found from "\r\r\nOK" sequence.
If Mbed TLS support for X509 is not compiled in, this class would
not compile anymore. However, there might be other uses for it, even
if certificates are not used. Therefore add flagging for X509 only
on specific functions.
mbed.h was added in test, via greentea and utest header files. 'mbed.h' is removed
from header files and required header file and namespace is added to CPP/C files
Previously, we weren't filling in RX1 frequecny in rx_window1_config
structure. However, everything worked as in LoRaPHY::rx_config() API
there was a check which filled in correct RX1 frequency.
Now we are filling in RX1 freq. properly while we are computing
parameters for RX1 window.
The idea behind the method post_process_no_reception() is to post
process any outgoing TX but we shouldn't do that if a CONFIRMED message
is outgoing and there are still some retries left.
After transmission we should change the state before invoking opening of
slots as we may start receiving in the rx slots and the state would
suddenly change from SENDING to RECEIVING without going through the
ACK_WAIT state (in case of CONFIRMED messages). Tests show that after
this slight adjustment, our number of ack retries have significantly
reduced.
LinkADRReq mac command can be used by the network server to set a
certain level of QOS using NbTrans field which is applicable to
Unconfirmed traffic only for 1.0.2 spec.
This commit introduces mechanisms to facilitate this QOS. It means to
repeat an outgoing unconfirmed message NbTrans times without changing
its frame counter.
For class C, we have retired the ack_expiry_timer_for_class_c and have
replaced it with another timer which mimics the RX2 closure as in Class
A but doesn't actually close RX2 window. It's just a mechanism by which
the state machine is informed that the you can proceed forward, we have
not received anything in RX2 window either. This is needed as RX2
doesn't timeout in class C (i.e., the radio remains in continuous mode).
In addition to that we need to close any pending timers for Receive
windows after the MIC has passed and the Duplicate counter check has
also been passed.
Before going after an automatic uplink, we should check if there was an
automatic uplink already ongoing, i.e., the ack for the previous
automatic uplink cycle has not been received.
If there is we shouldn't queue the new automatic uplink and wait for
the previous Ack cycle to complete.
1. RTOS is needed only for Stack stats
Move+Add all required header files for RTOS into MBED_STACK_STATS_ENABLED
define. Also added 'using namespace'
2. Add heap stats only when MBED_HEAP_STATS_ENABLED
Change error from `MBEDTLS_PLATFORM_HW_FAILED` to
`MBEDTLS_PLATFORM_HW_ACCEL_FAILED` and the value to 0x70,
as the previous value cannot be used as a low level error code.
Mel W
paul-szczepanek-arm
Paul Szczepanek
Cruz Monrreal
Anna Bridge
Mirela Chirica
Seppo Takalo
Antti Kauppila
Kari Haapalehto
Deepika
Martin Kojtal
Hasnain Virk
Ron Eldor