Add an 'all' parameter to get_flash_algorthim_binary. When set
an enumerator of all flash algorithms is returned. rather than just
the first flash algorithm.
Currently, there is the issue in register setting into serial_format().
The issue is that parameter for baudrate setting is initialed zero in this function.
In baudrate is less 9600bps, the issue occurs. In baudrate is over 9600, not occurs. When call serial_baud() before serial_format(), baudrate override and set with an incorrect value.
Therefore, I fixed register setting not to set the parameter of baudrate setting in serial_format().
Resolves the github issue #3790: Blinky fails to build (on Mac) after
addition of linker script preprocessing feature. Paraphrasing, this
issue is that Homebrew on mac does not install `arm-none-eabi-gcc` in
the same location as `arm-none-eabi-cpp`, the C Pre-Processor. The tools
prior to this commit, and after turning on the pre-processing of the
linker-script will fail on any Mac homebrew installed toolchains.
This commit resolves the above issue by allowing the toolchain's path to
the executable to remain empty after a call to `check_executable`. When
this path is empty, the tools will search the PATH environment variable
for the executable.
Calling Thread::start multiple times leads to undefined behavior since
the Thread class was not designed to handle being restarted. Return an
error code if Thread::start is called a second time to prevent this
behavior.
I accidentally broke only uARM mbed 2 builds. Here is the story: When
scanning for resources, toolchains look for any `TOOLCHAIN_<classname>`
folders to include. These `<classname>`s mostly match the name passed in
on the command line with one exception: `uARM` on the command line maps
to `ARM_MICRO` the class. This would not be a problem except for the bug
that I introduced in a prior commit. The bug is that the mbed2 library
builds will use the name passed in on the command line to construct
`TOOLCHAIN_<cli-name>`. This will not match when scanning.
I fixed it by translating the `<cli-name>` into the `<classname>`.
An earlier patch in this series changed the API for
`build_api.prepare_toolchain`. This commit updates the `find_test`
function to call `prepare_toolchain` correctly.
An earlier patch in this series relies on the assumption that all
toolchain construction goes through `prepare_toolchain`. This is still
not the case. The only remaining user of the `mbedToolchain` object that
does not go through `prepare_toolchain` is the static analysis scanner.
It's basically dead-code at this point. I say we remove it. So this
patch removes it.
The prior patch in this series makes the assumption that any building
will go through `build_api.prepare_toolchain`. This was not a valid
assumption for the mbed2 build process. So, instead of maintaining 2
ways of using the toolchain classes, I elected to unify on
`prepare_toolchain`.
This is a bug fix for the following bug (Github issue #437):
If two builds were run specifying a non-default build folder, the second
build would fail to link with duplicate symbols and may not fit on the
device. The root of this problem is that these non-default build folders
are not ignored by scan-resources, and therefore included in the build.
We fix this bug by ignoring the build directory passed into the tools.
The pwmout driver is very similar for each STM32 family.
The only family specific part is defined in pwmout_device.h file.
It mainly contains few specific information:
- The mapping of PWM/TIMERS to APB1 or APB2 so that we can get the clock
- The clock calculation uses the right APB clock, which was sometimes
not the case before and could have lead to errors in case dividers were
enabled on APB clock settings. This case is now covered.
- Inactivation of inverted support on feaw families
The `sleep` function as been changed into `hal_sleep` by #3607.
Unfortunately the call to `sleep` in the hal_patch for the NRF51822 has not been
updated to `hal_sleep`. The result was a link time error for targets based on
NRF51822_LEGACY compiling with the mbed OS 5 tree.
If the free memory on a device is small enough then the calculation to
determine heap size could underflow to a large value. If this happens
then malloc will never return failure and instead will cause a crash on
allocation. This patch prevents the underflow so malloc works as
expected even with low amounts of free memory.
We have scripts (written in python) that are run after a binary image is
created in the tools. These scripts are not really exportable, as they
are part of the tools and may include and use any bits of python code
they please. So we don't export them. This patch disables export
combinations that would not work because the post-binary hook is not
exported. A white-list is used for forward compatibility.
Russ Butler
TomoYamanaka
Jimmy Brisson
jeromecoutant
Radhika Raghavendran
Wolfgang Betz
adustm
Anna Bridge
Simon Vogl
Christopher Haster
Mohammad Azim Khan
Andres AG
bcostm
Głąbek, Andrzej
Laurent MEUNIER
Vincent Coubard