SPIFReducedBlockDevice parameters come from mbed_lib.json if not provided
explicitly.
Introduced an app config file for running filesystem tests with RSPIF
block device
SPIFBlockDevice parameters come from mbed_lib.json if not provided
explicitly.
Introduced an app config file for running filesystem tests with SPIF
modules
QSPIFBlockDevice parameters come from mbed_lib.json if not provided
explicitly.
Introduced an app config file for running filesystem tests with QSPIF
modules
* Make mbed_error use bitwise MbedCRC call rather than local
implementation.
* Remove use of POLY_32BIT_REV_ANSI from LittleFS.
* Move some MbedCRC instances closer to use - construction cost is
trivial, and visibility aids compiler optimisation.
* Make mbed_error use bitwise MbedCRC call rather than local
implementation.
* Remove use of POLY_32BIT_REV_ANSI from LittleFS.
* Move some MbedCRC instances closer to use - construction cost is
trivial, and visibility aids compiler optimisation.
4-byte addressing has been seen to cause failures on NORDIC
boards and with Macronix memories. Suppress the attempt to enable it
on that hardware (via vendor quirks and a target check) until either
the failure cause can be fixed or a more robust suppression mechanism
is implemented.
Use a vendor id check to only perform this enable on devices which define the
second configuration register where the fast mode enable bit lives.
Change _enable_fast_mode to use the standard status register reading and writing functions
Default to 2 status registers, but update this value if necessary
during vendor quirk handling for parts (currently only Macronix)
which have one status register and two control registers. For the
purposes of QSPIFBlockDevice, these are all considered status
(or at least "status-like") registers because they are all written
via the Write Status Register instruction.
Set the custom RDCR instruction for Macronix during quirk handling.
Update reading and writing of status registers to handle a variable
number of status registers.
Introduce a separate function for handling alterations to device interaction
which are not covered by the SFDP tables and therefore require checking against
the vendor id.
QSPIFBlockDevice::_clear_block_protection() has logic to retain the
WIP and WEL bits in status register 1, but it failed to account for
the situation where the QE bit is also in status register 1.
In _sfdp_set_quad_enabled, note the status register and bit therein
for the quad enable, so that _clear_block_protection can retain it.
This function writes a "config" register to ensure that the flash part
is in high performance mode, not low-power mode. This is required at
by at least MX25R6435F in order to operate at frequencies > 33MHz
(for reference, DISCO_L475VG_IOT01A runs the QSPI interface at 80 MHz).
The config register that this writes does not appear to be covered by
the SFDP spec (JESD216D.01) so this remains the status quo of
unconditional execution, as has been done on master since #8352.
* Refactor some headers to use relative path from Mbed OS root.
* Refactor some data types to compile on 64bit machines.
* Refactor some debug traces to use mbed_trace.
Encourage the usage of consistent types (there are currently
a mix of `int` and `unsigned int` used for qspi instructions)
QSPI commands are limited to 8 bits, to this is a typdef to char
Update to follow the same `goto exit_point` pattern that is used
by the rest of the functions to avoid leaving the mutex locked
when errors are detected and require the function to abort.
Veijo Pesonen
Przemyslaw Stekiel
Kevin Bracey
Martin Kojtal
Kyle Kearney
Matthew Macovsky
RAJKUMAR KANAGARAJ
Seppo Takalo
toyowata
jeromecoutant