0742135fd1
Merge pull request #14457 from ARMmbed/uart-stdio-alias
...
Update UART pin names & add MBED_CONF_TARGET_STDIO_UART overrides
2021-03-26 15:17:58 +00:00
76f470411a
Merge pull request #14450 from jeromecoutant/PR_SPI_WB
...
FPGA SPI : decrease test frequency for ASYNC test cases
2021-03-26 14:52:00 +00:00
3e63fd911c
Replace USBTX/RX in docs
2021-03-24 10:18:34 +00:00
cd5330e5a9
Replace USBTX/RX everywhere else
2021-03-24 10:11:30 +00:00
8a4b88c762
Update USBTX/USBRX alias
2021-03-23 17:07:52 +00:00
b943c4474a
FPGA SPI : decrease test frequency for ASYNC test cases
2021-03-19 11:34:23 +01:00
21194f5b95
New lines
2021-03-18 17:01:54 +00:00
d239ef98cd
Rename USBTX/RX to CONSOLE_TX/RX
2021-03-18 17:01:54 +00:00
3af96247a6
Update PinNames markers
2021-03-18 17:01:54 +00:00
4dfdb11de0
Move pinvalidate files
2021-03-18 17:01:54 +00:00
885cdef5f7
Add standard pin-names validation script & tests
2021-03-18 17:01:53 +00:00
500ddf596a
[STD-PIN] Updates after review
2021-03-18 17:01:50 +00:00
d514b78bb3
[STD-PIN] hal-tests-tests-pin_names-arduino_uno
...
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A0 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A1 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A2 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A3 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A4 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | ADC A5 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A0 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A1 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A2 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A3 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A4 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO A5 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D0 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D1 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D10 | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D11 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D12 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D13 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D14 | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D15 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D2 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D3 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D4 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D5 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D6 | 1 | 0 | OK | 0.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D7 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D8 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | GPIO D9 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | I2C | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D10 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D11 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D3 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D5 | 1 | 0 | OK | 0.06 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D6 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | PWM D9 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | SPI | 1 | 0 | OK | 0.08 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-arduino_uno | UART | 1 | 0 | OK | 0.06 |
2021-03-18 17:01:50 +00:00
eca714c93f
[STD-PIN] update tests and components
2021-03-18 17:01:50 +00:00
9d453cce68
[STD-PIN] ARDUINO_UNO pins
...
- hal/include/hal/ArduinoUnoAliases.h creation
- doc update
2021-03-18 17:01:50 +00:00
a4350f72bd
[STD-PIN] BUTTON and LED define
...
hal/tests/TESTS/mbed_hal/gpio/main.cpp is replaced by
hal/tests/TESTS/pin_names/generic/main.cpp now
2021-03-18 17:01:50 +00:00
23e3bb301d
[STD-PIN] hal-tests-tests-pin_names-generic
...
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | BUTTON1 | 1 | 0 | OK | 0.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | LED1 | 1 | 0 | OK | 1.05 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | LED2 | 1 | 0 | OK | 1.04 |
| B_L4S5I_IOT01A-ARMC6 | B_L4S5I_IOT01A | hal-tests-tests-pin_names-generic | LED3 | 1 | 0 | OK | 1.04 |
2021-03-18 17:01:50 +00:00
a6c213bb10
[STD-PIN] Replace STDIO_UART_TX by USBTX
2021-03-18 17:01:50 +00:00
c45e6ce13f
Remove usage of MBED_TARGET_LABELS in hal/ tests
...
This removes some dependency on targets.json
2021-02-19 19:15:47 +00:00
7d49d4bce1
Create FLASH CMSIS ALGO target to remove dependency on MBED_TARGET_LABELS
...
This goes towards eventually removing reliance on targets.json to specify
the requirements of Mbed targets.
2021-02-19 16:56:37 +00:00
6824b14e48
CMake: rename greentea test macro
2021-02-02 07:43:40 -08:00
7d7159d20f
Apply suggestions from code review
...
Co-authored-by: Hugues Kamba <41612201+hugueskamba@users.noreply.github.com>
2021-01-08 03:21:03 -08:00
71729238f0
CMake: Add support for mbed_timing_fpga_ci_test_shield greentea test
2021-01-05 09:10:45 -08:00
d9f2d765f4
CMake: Add support for mbed_hal_fpga_ci_test_shield greentea test
2021-01-05 09:10:45 -08:00
f78d7e1fe5
CMake: Add CMake support for mbed_hal greentea test
2021-01-05 09:10:45 -08:00
4e0d07d50f
Merge pull request #12897 from kjbracey-arm/tickeropt
...
Optimise mbed_ticker_api.c
2020-11-30 16:15:37 +00:00
2f709cc13f
Merge pull request #13896 from jeromecoutant/PR_OSPI
...
STM32 OSPI support
2020-11-24 13:53:30 +00:00
57bbb4739b
Merge pull request #13085 from pea-pod/remove-deprecated-mbed-assert
...
Change MBED_STATIC_ASSERTs version for built-in
2020-11-24 13:38:07 +00:00
4d8127223c
OSPI test: dummy cycle update
2020-11-10 18:38:21 +01:00
e7c0d93ad4
CMake: add mbed-os and mbed-baremetal targets
...
mbed-os consists of mbed-core and mbed-rtos
mbed-baremetal consists of mbed-core
The main change is for mbed-core. Changing from object library to be interface. This way it allows us to do the above to have 2 main targets for users to use.
This should be backward compatible change as mbed-os target we used contains the same files/options as previously set.
2020-11-06 17:25:22 +00:00
bf84a5b329
CMake: Rename CMake targets
...
* mbed-os renamed mbed-core
* mbed-os-<COMPONENT> renamed mbed-<COMPONENT>
2020-11-06 17:25:22 +00:00
8016a53400
CMake: replace usage of the mbed_add_cmake_directory_if_labels() function ( #13754 )
...
Directories that start with special prefixes (TARGET_, FEATURE_, COMPONENT_) are added to the build based on Mbed target configuration from targets.json instead of calling utility function mbed_add_cmake_directory_if_labels().
2020-11-06 17:25:21 +00:00
44f9d176e8
CMake: Fix build due to hal dir move
2020-11-06 17:25:20 +00:00
5f53181f33
CMake: Fix access to usb hal source file
2020-11-06 17:25:18 +00:00
8f9bf40323
CMake: Add support for hal dir
2020-11-06 17:25:15 +00:00
507181d262
Change MBED_STATIC_ASSERTs version for built-in
2020-10-27 08:30:40 -05:00
21652971a5
Merge pull request #12644 from macronix/macronix_ospi
...
Add OSPI driver to support the Octa mode of Macronix octaflash MX25LM51245G
2020-09-30 16:07:20 +01:00
a02ea2f43a
Merge pull request #13623 from rajkan01/refactor_docs
...
Refactor mbed-os design docs
2020-09-21 16:28:13 +01:00
19908b2b21
Refactor hal, platform, rtos docs
2020-09-17 16:03:43 +01:00
dcf6def947
Merge pull request #13621 from rajkan01/refactor_rem_tests_dir
...
Refactor remaining TESTS related to hal, rtos, and platform dir
2020-09-17 09:08:16 +01:00
a74120ca2e
Move greentea test closure to library
2020-09-16 13:04:21 +01:00
48524f25ae
add opsi driver
2020-09-16 11:27:23 +08:00
c887290db6
Adjust ticker tests
2020-09-14 13:25:12 +03:00
65bc41a96b
Optimise mbed_ticker_api.c
...
The generic code in mbed_ticker_api.c uses run-time polymorphism to
handle different tickers, and has generic run-time calculations for
different ticker widths and frequencies, with a single special-case for
1MHz.
Extend the run-time special casing to handle any conversion cases where
either the multiply or divide can be done as a shift. This is a speed
optimisation for certain platforms.
Add a new option `target.custom-tickers`. If turned off, it promises
that only USTICKER and LPTICKER devices will be used. This then permits
elimination and/or simplification of runtime calculations, saving size
and speed. If either both USTICKER and LPTICKER have the same width, or
same period numerator or denominator, or only one of them exists, then
operations can be hard-coded. This is a significant ROM space saving,
and a minor speed and RAM saving.
We get to optimise all the calculations, but the run-time polymorphism
is retained even if there is only one ticker, as it doesn't
significantly affect code size versus direct calls, and the existence of
lp_ticker_wrapper and various us_ticker optimisations requires it, even
if only LPTICKER is available.
2020-09-14 13:25:10 +03:00
6423633122
Add documentation for LP_TICKER defines
...
They're now potentially useful, so document them as per the US_TICKER
defines.
2020-09-14 13:25:08 +03:00
c1dd8b9acd
redundant code combined
2020-09-14 13:25:06 +03:00
2bc7bb7a52
- Remove components reference from travis
...
- update readme
2020-09-11 14:33:18 +01:00
468372e759
Merge pull request #13492 from talorion/fix-PwmOut-resets-after-suspend
...
Fix pwm out resets after suspend
2020-09-10 12:40:18 +01:00
39e69d328d
Use boot stack size from config system
...
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes #10319
2020-09-10 10:08:38 +01:00
877078003c
Rename CY8CKIT_064B0S2_4343W to CY8CKIT064B0S2_4343W, which fits in 20 characters limit
2020-09-07 08:25:31 +03:00
Anna Bridge
George Psimenos
jeromecoutant
Hugues Kamba
Rajkumar Kanagaraj
Rajkumar Kanagaraj
Martin Kojtal
pea-pod
rogeryou
Kevin Bracey
Antti Kauppila
Jaeden Amero
Roman Okhrimenko