This code prevents the ARMC6 compiler/linker from removing
SUB_REALLOC/CALLOC symbols from image when LTO is enabled
Fixes below error:
L6137E: Symbol $Sub$$calloc was not preserved by the LTO codegen but is needed by the image.
In mbed_start_application() there was a code that was supposed to
set DISDEFWBUF to one when running a debug build. However, this code
was in the wrong place, as this function is only called from
bootloader.
Move the code to correct place so that standalone applications use it
as well.
For the reference of DISDEFWBUF bit, see
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0552a/CHDCBHEE.html
`SysTimer::set_wake_time` incorrectly assumed that the `SysTimer`s tick
count and the underlying HAL timer had the same zero base. This normally
holds, at least approximately, in RTOS builds where the HAL timer starts
from zero at the same time the SysTimer is initialised.
But in bare metal builds, the HAL timer could be started some time
before the SysTimer, giving a significant discrepancy.
Beyond that, there's no requirement for HAL timers to start from zero in
the spec.
Record the HAL timer start time to get the conversion right.
Enabled heap_and_stack test for baremetal.
Added a test to check that global variables are initialised.
In mbed_sdk_boot:
- Added initialisation for mbed_stack_isr_start/size and mbed_heap_start/size for all toolchains.
- ARM toolchain:
- Added call to mbed_toolchain_init() to initialise global variables.
- Moved microlib initialisation code from mbed_retarget.cpp to mbed_sdk_boot.c.
- IAR toolchain: there is no equivalent to a software init hook that can be called. __low_level_init() was used but since this function is called before RAM initialisation, it cannot be used to initialize global variables. Defined a new __mbed_init() function called from IAR startup file instead.
As the ARM compiler is in GNU compatible mode, it defines __GNU__ which
(based on pre-processor condition in mbed_printf_implentation.h)
causes the printf functions to be wrapped using _wrap_* instead of
$Sub$$*.
This commit modifies the pre-processor
conditions to check for __GNUC__last in order to correctly
substitute the printf functions depending on the toolchain in use.
It also gets rid of $Super$$* substitution as it is not needed. $Super$$
is used to identify the original unpatched functions.
Missing substitutions for ARM compiler internal optimized "printfs" are
also added.
- By default, Mbed OS build tools use standard C library for all supported toolchains.
It is possible to use smaller C libraries by overriding the "target.default_lib" option
with "small". This option is only currently supported for the GCC_ARM toolchain.
This override config option is now extended in the build tool for ARM toolchain.
- Add configuration option to specify libraries supported for each toolchain per targets.
- Move __aeabi_assert function from rtos to retarget code so it’s available for bare metal.
- Use 2 memory region model for ARM toolchain scatter file for the following targets:
NUCLEO_F207ZG, STM32F411xE, STM32F429xI, NUCLEO_L073RZ, STM32F303xE
- Add a warning message in the build tools to deprecate uARM toolchain.
- NewLib-Nano C library is not supporting floating-point and printf with %hhd,%hhu,%hhX,%lld,%llu,%llX
format specifier so skipping those green tea test cases.
Added missing mbed_error_initialize function call in bare metal boot code which is used
to retrieve the crash report from RAM in case of any previous abnormal re-boot but this function call is present in RTOS boot code.
* Make mbed_error use bitwise MbedCRC call rather than local
implementation.
* Remove use of POLY_32BIT_REV_ANSI from LittleFS.
* Move some MbedCRC instances closer to use - construction cost is
trivial, and visibility aids compiler optimisation.
If the fault handler was hit before the stdio console was used and
initialised, the initialisation code caused a "mutex in ISR" trap,
stopping the register dump from happening.
Temporarily set the `error_in_progress` flag at the top of the fault
handler, and restore it before calling `mbed_error`. Take the
opportunity to suppress fault dumps on recursive crashes, much as is
done inside `mbed_error`.
Build successfully when `platform.stdio-convert-tty-newlines` or
`platform.stdio-convert-newlines` are set to `true` by ensuring
`isatty()` is also included when `platform.stdio-minimal-console-only`
is set to `true`.
Martin Kojtal
Rajkumar Kanagaraj
Evelyne Donnaes
Anna Bridge
David Lin
Maciej Bocianski
Kevin Bracey
Seppo Takalo
Hugues Kamba
Antti Kauppila
Przemyslaw Stekiel
Philipp Steiner