a8ebfaa058
Merge pull request #3288 from LMESTM/dev_spi_asynch_l0l1
...
Dev spi asynch l0l1
2016-11-29 18:17:06 +01:00
bb2d03f34b
Merge pull request #3213 from bcostm/factorize_ticker
...
STM32: Refactor us_ticker.c + hal_tick.c files
2016-11-29 18:10:45 +01:00
93c08f340a
Merge pull request #3062 from jamike/TARGET_STM_USBDEVICE_FS
...
TARGET_STM :USB device FS
2016-11-29 18:07:11 +01:00
9abb7c3777
Updated ARM binary
2016-11-23 17:39:28 +01:00
4648ec606b
Added updated drivers for GCC, IAR
2016-11-23 15:18:17 +01:00
c2d09bd6a2
Fixed wrong start params to cbMAIN_startWlan
2016-11-23 11:38:35 +01:00
7cdaba8474
[stm32] remove unused module member in spi_s struct
2016-11-18 09:59:53 +01:00
5750f31d6d
Merge pull request #3238 from LMESTM/dev_i2c_stm32f4hal
...
Dev i2c stm32f4hal
2016-11-16 17:42:12 +00:00
e875dbc90d
Merge pull request #3237 from javierpedrido/master
...
Added back USART 6 pins
2016-11-14 21:46:59 -06:00
896293d5be
Replace TIM_MST_GET_PCLK_FREQ macro with TIM_MST_PCLK macro
2016-11-14 09:31:14 +01:00
0524811c75
STM32xx - Remove hal_tick.c files and update hal_tick.h with new macro
2016-11-14 09:31:14 +01:00
bb10409954
Replace all devices us_ticker files with a common 16b and 32b file
2016-11-14 09:31:14 +01:00
e293e07749
stm32f4 make comment more explicit
...
As reported during review, this was not understandable as it is.
the get_i2c_obj allows to get a pointer to i2c_s struct from the
handle pointer. This therefore makes a hard-coded assumption
about the struct itself
2016-11-10 17:30:04 +01:00
52dc7c5423
Renames all prebuilt binaries to be prefixed with 'lib'
...
This fixes an issue with make_iar, since IAR requires all libraries that
are linked to be prefixed with 'lib'.
2016-11-09 11:08:01 -06:00
b491165eac
[STM32F4] Add few prints for I2C debug
2016-11-09 18:03:04 +01:00
a65bacc032
[STM32F4] Master receive sequential - fix for HAL I2C
...
in case of 2 consecutives calls to HAL_I2C_Master_Sequential_Receive_IT
with the Xfer mode I2C_FIRST_AND_LAST_FRAME, the second trasnfer does
not start at all.
It seems this is because the previous state is maintained as I2C_STATE_MASTER_BUSY_RX
and therefore the START condition will not be generated
2016-11-09 18:03:02 +01:00
a50dc77c60
STM32: I2C: Change the master sync implementation to use ITs
...
With this new implementation, as in slave implementaiton, we use the
interrupts instead of accessing to registers continuously.
This has 2 main advantages:
- this shall improve performances overall and allows for sleep
time in the future
- this also removes some direct registers access from this
layer of code and makes it more generic among families
2016-11-09 18:02:59 +01:00
ec95aa5701
STM32: I2C: Reset I2C in case of errors to recover
...
This is to avoid an IP / bus deadlock.
This requires to store scl and sda in order to call the init function.
2016-11-09 18:02:57 +01:00
42d89b0665
STM32: I2C: Update Timeout computation
...
The timeout values are based on for loops and therefore should depend
on the core frequency and the I2C interface frequency.
This patch introduces this computation and base the timeout on the time
it should take to send a byte over the I2C interface. When sending a
number of bytes, this value can also be used.
In the loops, the timeout should also be decreased before the while
condition so that its value is 0 in case the timeout elapsed and this
can be treated as an error.
2016-11-09 18:02:54 +01:00
79504a6a38
STM32: I2C: Change the slave API implementation to use ITs
...
With this new implementation, the slave use the Interrupt
to be notified of a request from master, instead of
accessing to registers continuously.
This has 2 main advantages:
- this shall improve performances overall and allows for sleep
time in the future
- this also removes some direct registers access from this
layer of code and makes it more generic among families
2016-11-09 17:22:28 +01:00
d71537bb00
STM32: I2C: use irq helper function
2016-11-09 17:22:28 +01:00
c2060e34a3
STM32: I2C: Add-up irq handlers
...
With this commit we define I2C irq handlers that can be used by the driver
in sync mode. This also provides a mecanism for enabling and/or disabling
these handlers
Those handlers will be superseded by MBED ones in case of async mode usage.
2016-11-09 17:22:28 +01:00
490437ae29
STM32: I2C: Move up get_i2c_obj
...
so that it can be used as well in sync mode
2016-11-09 17:22:28 +01:00
0bee69023c
STM32: I2C: Don't use global init variables
...
No need to store the init status of each IP.
Init can be called again in case we try to recover.
2016-11-09 17:22:28 +01:00
2b53dfc453
STM32: I2C: configure slave address with HAL API
...
Instead of direct registers access, let's use HAL API.
This makes the code more generic accross STM32 families.
2016-11-09 17:22:28 +01:00
b7882d6e9b
Added back USART 6 pins
2016-11-09 12:14:35 -03:00
182c311fbd
TARGET_STM : USB FS STM HAL changes
2016-11-09 12:08:45 +01:00
31a7cd017e
Tab -> spaces
2016-11-07 21:59:27 +01:00
baf519f4c5
Updated ublox ODIN-W2 binaries
2016-11-07 19:11:39 +01:00
fde39602b9
Fixed dynamic message queue for scan results
2016-11-07 15:52:59 +01:00
a4f09b5fdb
Added cbMAIN_dispatchEventQueue
2016-11-07 15:52:58 +01:00
32dfe73b09
Added missing checks for wifi_link_out when allocating packets
2016-11-07 15:52:57 +01:00
fd7c9cc13a
Added copying of the wifi_link_out buffer since the buffer might change after call chain has ended.
2016-11-07 15:52:56 +01:00
7eaf32baa0
Merge pull request #3075 from geky/nsapi-error-size-types-2
...
nsapi - Add standardized return types for size and errors
2016-11-07 11:13:40 +00:00
b045c8ba00
nsapi - Adopted standardized return types in the Odin wifi interface
2016-11-02 15:37:34 -05:00
6cddb4df8b
[MTS_MDOT_F411RE] add back SPI3 pins that shouldn't have been removed
2016-11-02 13:41:04 -05:00
4a4d09f6d1
Merge pull request #3074 from jamike/TARGET_STM_INIT_GCC_ALIGNEMENT
...
Target STM - init gcc alignement
2016-10-28 11:04:50 +02:00
4a69072161
INIT:GCC add call to HAL_Init
...
system_init, stops all on going timer.
gcc _start , perform zero initialized.
=> HAL_Init must be done again also in GCC toolchain
2016-10-27 10:40:28 +02:00
ee22d0a054
STM32F4xx: GCC_ARM remove zero bss, in startup.
...
zero bss is done in libc init after call to _start.
2016-10-26 14:41:45 +02:00
4d1d1c5b69
Merge pull request #3068 from MultiTechSystems/mdot-pin-updates
...
MultiTech mDot - clean up PeripheralPins.c and add new pin names
2016-10-25 10:47:59 +02:00
5b67832959
Merge pull request #3054 from andreaslarssonublox/ublox_fix_odin_mbedtls_config
...
Moved mbedtls config for u-blox ODIN-W2 to macros in target.json
2016-10-20 10:59:05 +01:00
fc39f6b736
Merge pull request #3064 from c1728p9/f429_heap
...
NUCLEO_F429 - Increase IAR heap size
2016-10-19 05:51:20 -05:00
2ae71777aa
Merge pull request #3013 from bcostm/check_adcintch_pins
...
STM32xx - Change how the ADC internal pins are checked before pinmap_…
2016-10-19 05:43:15 -05:00
d854547b0c
NUCLEO_F429 - Increase IAR heap size
...
Increase the IAR heap size from 48KiB to 64KiB. This give enough heap
space to run the TLS encryption examples.
2016-10-18 16:43:28 -05:00
c6fde7cfce
[MTS_MDOT_F411RE] remove duplicate PWMs, fix swapped pins
2016-10-18 09:34:46 -05:00
cb113d738e
Moved mbedtls config for u-blox ODIN-W2 to macros in target.json
2016-10-18 01:07:48 +02:00
b8355c2073
Fixed the emac_interface_t struct so that the struct constructor is not used.
...
We can not rely on the struct constructor to be run since wifi_emac_get_interface can be run from the OdinWiFiInterface constructor before that.
2016-10-18 00:36:30 +02:00
b6f7b8c463
[MTS_MDOT_F411RE] clean up peripheral pins & add new pin names
2016-10-17 15:36:28 -05:00
7bcc63b202
Merge pull request #2977 from andreaslarssonublox/ublox_drivers
...
Ublox drivers
2016-10-14 14:56:06 -05:00
394796f47e
Added guard for DEVICE_EMAC in wifi_emac_api.cpp
2016-10-14 02:42:53 +02:00
Martin Kojtal
andreas.larsson
Laurent MEUNIER
Sam Grove
bcostm
Brian Daniels
javierpedrido
Michel Jaouen
Andreas Larsson
Christopher Haster
Mike Fiore
Russ Butler
Russ Butler