Currently the return value of flash_get_page_size() is 1 since the min size per one writing is 1 byte by Flash spec.
However, I noticed that this value causes a enormous write time When writing large data such as FW update.
So I revised this value to 8 byte by considering the writing time, memory alignment and memory hole.
I changed _page_program() func because "buf" which is an argument of data_send() for writing must be a RAM address in order to operate in SPI mode.
(ex: if it is ROM table data, writing will be failure.)
Also, I changed the period of interrupt disable/enable at _page_program() func and _sector_erase() func because lock period is too long.
I modified the _page_program() because when the request of the size exceeding the maximum size(256 byte) per one writing of Flash recieved, it was not able to loop the writing with sifting the address every 256 byte.
Also I modified the return value of flash_get_page_size() because I found that the minimum size per one writing of Flash is 1 byte by reviewing Flash spec.
"FLASH_PAGE_SIZE" macro's value is remain 256, it doesn't be used at flash_get_page_size(), used at _page_program() for refferencing of the maximum page size.
The mainly changes is below:
- Add flash_api.c
- Add the definition of SPI multi I/O Bus controller that is used for flash access
- Add "FLASH" as device feature
- Add the macro regarding information of the incorporated Flash
- Add the processing to expand code to RAM
David Saada
TomoYamanaka