Socket ID is usually spitted out by the modem, however there are cases
when the modem is actully taken in as an input argument, e.g., in the
case of QUECTEL M26 modem. This minor knit clarifies that the
CellularSocket::id can be an input argument.
Disconnect was sent to all CellularContext classes even it concerned
one specific context. Some disconnect events are still sent to all
context classes. These event are coming from network and ment for all
context classes or event did not specify cid.
CellularDevice::get_default_instance() is a weak method and is overriden
by either a default construction provided in the code or by application
at some stage. This method needs to be flagged otherwise using another
driver will be hindered by the default overriding of this driver.
Using malloc will require us to add stdlib.h somewhere in the path for
the application. Maybe the CI apps are adding stdlib.h and that's why
the code would have worked. In a custom app, it can happen that the
header is not included. Using new avoids the need to add stdlib.h
anywhere and it is more in line with C++.
For default construction of the driver, it would be necessary to define
the pins. However as we don't know the correct pins, until/unless user
sets them up for us. So it makes sense to mark the pins as NC. It would
be easier to debug if the pins are set to NC if user forgot to set them
up.
To make this driver more useful, we needed to do some changes. The
wirings for the modem can differ on the board so we also need to be
flexible in our approach.
It is now mandatory to provide the power pin and pin polarity in the
constructor alongwith the file handle. Reset pin is optional.
Standard 3GPP TS27.007 states that the AT+CGSN command can optionally
have type parameter that determines the output. However Quiectel EC2X
series doesn't accept parameters. We need to reflect that in the
cellular properties setup.
Provides basic power up / power down sequences for Quectel EC2X series
modems. Can be used in PPP mode. For using the on-board IP stack, we
will need to add and implement classes that provide context.
Driver constructor takes power and reset control pins along with the
FileHandle. A default construction is provided which can be chosen by
the application in its mbed_app.json. Otherwise the user is free to
construct as per demand.
Original AT traces had several issue:
- Can be overwritten by other traces (printf/mbed-trace)
- No way to know which direction message was going (TX or RX)
- <cr> and <ln> characters were not visible in trace
etc.
This commit addresses those issues using mbed-trace and showing separately
each filehandle write and read.
State machine has retry logic until device is attached to network.
After this CellularContext does the context activation e.g. connect.
There was no retry logic for context activation. Added logic to
CellularContext level so it's available for at and (upcoming)ril layers.
When using NetworkInterface::get_default_instance() application gets handle
to CellularInterface which is actually CellularContext derived from CellularInterface.
Application needs also handle to CellularDevice to open other interfaces.
Martin Kojtal
Ari Parkkila
Martin Kojtal
Kimmo Vaisanen
Mirela Chirica
Teppo Järvelin
Hasnain Virk
Cruz Monrreal
mudassar-ublox
Teemu Kultala