Update Mbed OS's PSA Crypto service to work with Mbed Crypto 3.x.
- psa_asymmetric_verify() is now called psa_verify_hash().
- psa_asymmetric_sign() is now called psa_sign_hash().
Compatibilty wrappers are provided via crypto_compat.h for source-level
backwards compatibility.
As the `psa` library is not included in the baremetal profile, perform
a TFM system reset only if the `psa` library is included in
the build otherwise perform a normal CMSIS system reset.
* Make mbed_error use bitwise MbedCRC call rather than local
implementation.
* Remove use of POLY_32BIT_REV_ANSI from LittleFS.
* Move some MbedCRC instances closer to use - construction cost is
trivial, and visibility aids compiler optimisation.
4-byte addressing has been seen to cause failures on NORDIC
boards and with Macronix memories. Suppress the attempt to enable it
on that hardware (via vendor quirks and a target check) until either
the failure cause can be fixed or a more robust suppression mechanism
is implemented.
Use a vendor id check to only perform this enable on devices which define the
second configuration register where the fast mode enable bit lives.
Change _enable_fast_mode to use the standard status register reading and writing functions
Default to 2 status registers, but update this value if necessary
during vendor quirk handling for parts (currently only Macronix)
which have one status register and two control registers. For the
purposes of QSPIFBlockDevice, these are all considered status
(or at least "status-like") registers because they are all written
via the Write Status Register instruction.
Set the custom RDCR instruction for Macronix during quirk handling.
Update reading and writing of status registers to handle a variable
number of status registers.
Introduce a separate function for handling alterations to device interaction
which are not covered by the SFDP tables and therefore require checking against
the vendor id.
QSPIFBlockDevice::_clear_block_protection() has logic to retain the
WIP and WEL bits in status register 1, but it failed to account for
the situation where the QE bit is also in status register 1.
In _sfdp_set_quad_enabled, note the status register and bit therein
for the quad enable, so that _clear_block_protection can retain it.
This function writes a "config" register to ensure that the flash part
is in high performance mode, not low-power mode. This is required at
by at least MX25R6435F in order to operate at frequencies > 33MHz
(for reference, DISCO_L475VG_IOT01A runs the QSPI interface at 80 MHz).
The config register that this writes does not appear to be covered by
the SFDP spec (JESD216D.01) so this remains the status quo of
unconditional execution, as has been done on master since #8352.
To support online compiler build for PSA targets, some files are
auto-generated (LPC55S69_NS and ARM_MUSCA_A1_NS) by the script
from offline build system. Since these files are identical for these
V8-M targets it would be good to check them in to support online
compiler as they are COMPONENT_SPE and services related.
In folder: components/TARGET_PSA/
--TARGET_MBED_SPM
--COMPONENT_SPE
psa_setup.c
--TARGET_TFM
--COMPONENT_SPE
--inc
tfm_partition_defs.inc
tfm_partition_list.inc
tfm_service_list.inc
tfm_spm_signal_defs.h
--services
--inc
autogen_sid.h
mbed_spm_partitions.h
Signed-off-by: Vikas Katariya <Vikas.Katariya@arm.com>
Darryl Green
Arto Kinnunen
Jaeden Amero
adbridge
Pawel Zarembski
Andrew Chong
Antti Yli-Tokola
Przemyslaw Stekiel
Hugues Kamba
Martin Kojtal
Michal Paszta
Jarkko Paso
Kevin Bracey
Kyle Kearney
Matthew Macovsky
RAJKUMAR KANAGARAJ
Vikas Katariya
Seppo Takalo