Previously, we weren't filling in RX1 frequecny in rx_window1_config
structure. However, everything worked as in LoRaPHY::rx_config() API
there was a check which filled in correct RX1 frequency.
Now we are filling in RX1 freq. properly while we are computing
parameters for RX1 window.
The idea behind the method post_process_no_reception() is to post
process any outgoing TX but we shouldn't do that if a CONFIRMED message
is outgoing and there are still some retries left.
After transmission we should change the state before invoking opening of
slots as we may start receiving in the rx slots and the state would
suddenly change from SENDING to RECEIVING without going through the
ACK_WAIT state (in case of CONFIRMED messages). Tests show that after
this slight adjustment, our number of ack retries have significantly
reduced.
LinkADRReq mac command can be used by the network server to set a
certain level of QOS using NbTrans field which is applicable to
Unconfirmed traffic only for 1.0.2 spec.
This commit introduces mechanisms to facilitate this QOS. It means to
repeat an outgoing unconfirmed message NbTrans times without changing
its frame counter.
For class C, we have retired the ack_expiry_timer_for_class_c and have
replaced it with another timer which mimics the RX2 closure as in Class
A but doesn't actually close RX2 window. It's just a mechanism by which
the state machine is informed that the you can proceed forward, we have
not received anything in RX2 window either. This is needed as RX2
doesn't timeout in class C (i.e., the radio remains in continuous mode).
In addition to that we need to close any pending timers for Receive
windows after the MIC has passed and the Duplicate counter check has
also been passed.
Before going after an automatic uplink, we should check if there was an
automatic uplink already ongoing, i.e., the ack for the previous
automatic uplink cycle has not been received.
If there is we shouldn't queue the new automatic uplink and wait for
the previous Ack cycle to complete.
Date is managed only by SW
within CUBE functions HAL_RTC_GetDate and HAL_RTC_SetDate.
They are then replaced by functions that saved counters in HW registers.
RTC_ReadTimeCounter and RTC_WriteTimeCounter are then added to the ST API.
New classes covered with unit tests: SocketAddress, EthernetInterface, EMACInterface, WiFiAccessPoint.
Also added missing namespace in front of mbed::Callback usages.
EMACInterface is covered by the EthernetInterface unit tests.
### Description
I noticed that there was quite a bit missing from the mbed2 release of
the microbit today. That's because the microbit uses ARM by default and
the GCC_ARM small library. The release script was trying to release for
ARM using scan rules for uARM. Turns out we're stuck with 2 configuration
parameters for the same thing: `default_lib` for GCC and `default_toolchain`
for ARM. Dang
### Pull request type
[x] Fix
[ ] Refactor
[ ] Target update
[ ] Functionality change
[ ] Breaking change
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
Although "nv_seed" is one of "entropy", it doesn't included to the "!defined" lineup in the following config file.
Therefore, when MBEDTLS_ENTROPY_NV_SEED is defined, it is accidently invoked "mbedtls/config-no-entropy.h".
mbed-os\features\mbedtls\inc\mbedtls\config.h
I think that correct processing should go to line 47, not line 40.
Increase delta to 500 us. This value is still short enough to detect
incorrect behavior of the sleep_manager_can_deep_sleep_test_check() fun,
but allows the targets with low LP timer accuracy to pass, i.e.
NUCLEO_F429ZI.
jeromecoutant
Hasnain Virk
Oren Cohen
Cruz Monrreal II
Aleshandre Diaz
Michal Paszta
Jimmy Brisson
Seppo Takalo
Deepika
Andrew Leech
Martin Kojtal
TomoYamanaka
Filip Jagodzinski
Jarkko Paso
Juho Eskeli
Jarno Lamsa