AT_CellularContext::do_connect() is a virtual API and therefore can be overwritten in
inherited class. The problem was that it sets AT_CellularContext::_is_connected flag but
earlier it was set as private member making it impossible to set in overwritten do_connect()
method.
This commit fixes the problem by changing _is_connected as protected enabling its use
in inherited class.
As of 722628be02, the "remainder" configuration
also uses the default location near the end of flash. Which makes the two tests
nearly identical with the exception that the "last two sectors" test correctly
handles parts with a low (possibly 1:1) erase size to program size ratio.
Therefore, change the "remainder" test to instead be a "default" test that uses
the tdb_internal_address/size values, so that it
a.) tests something meaningfully different and
b.) tests using the custom TDB address/size values if they are provided.
c.) functions correctly on devices where the default sector-based size computation
does not work (e.g. because of the low erase size to program size ratio)
and therefore a custom location and size has been specified.
The is_conf_tdb_internal variable is unused and therefore removed.
This is related to https://github.com/ARMmbed/mbed-os/issues/11256
When TARGET_PSA is enabled on Cortex-A boards, the SECURE
is redeclared. So to minimize the impact we can redeclare this in
val.h which is used only by Mbed. And `security_t` itself is used in
mbed-os\components\TARGET_PSA\TESTS, but the SECURE string is not used.
Renamed to `caller_security_t` which aligns with
https://github.com/ARM-software/psa-arch-tests
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
We get this compiler warning;
Compile [ 7.9%]: AT_CellularDevice.cpp
[Warning] AT_CellularDevice.cpp@206,18: variable 'err' set but not used [-Wunused-but-set-variable]
Due to the fact, that the code that would actually use this variable
is behind trace flags. Based on review feedback from Antti Kauppila and
Kimmo Väisänen, adding same flagging also for that.
- Reason being - the operation needs to be within the locks.
Return value was ignored, and TDBStore:init() ended up in a
MBED_ERROR() phase after that.
TDBStore API was limited to allow returning of only two separate
errors, which may end up hiding the actual return value. Change
the documentation slightly to allow returning of original error
code from the underlying block device.
Fixes#11591
_ongoing_tx_msg was incorrectly initialized before _mlme_confirmation.
Fixes following build warning:
[Warning] LoRaMac.h@691,26: 'LoRaMac::_ongoing_tx_msg' will be initialized after [-Wreorder]
[Warning] LoRaMac.h@689,28: 'loramac_mlme_confirm_t LoRaMac::_mlme_confirmation' [-Wreorder]
[Warning] LoRaMac.cpp@68,1: when initialized here [-Wreorder]
- When calling socket APIs when socket is not open, NSAPI_ERROR_NO_SOCKET will be
returned instead of generic NSAPI_ERROR_DEVICE_ERROR
- If socket_send() is called when connection is not open, NSAPI_ERROR_NO_CONNECTION
will be returned instead of generic NSAPI_ERROR_DEVICE_ERROR
Some external modems have an internal TLSSocket implementation which can be used
instead of mbedtls based TLSSocket. Using offloaded TLSSocket can result in
significantly reduced ROM usage.
Offloaded TLSSocket can be enabled by enabling "nsapi.offload-tlssocket" and the used
network stack (e.g. cellular modem's CellularStack class) must support the setsockopt's
defined in nsapi_types.h.
Compared to original mbedtls based TLSSocket, offloaded TLSSocket brings in one significant
API limitation. Offloaded TLSSocket requires setting of certificates and keys after open()
and before connect() calls, where mbedtls based TLSSocket allows setting these before open()
call.
The default computation assumes that a flash sector is several times
larger than a flash page. On PSoC 6 targets this is not the case
(the two values are the same) so the computed size is too small.
This is a similar change to 1b1f14d36b,
but for devices which implement TDB in internal storage.
Wi-SUN mesh API uses now nanostack certificate interface with length parameters.
This enables that either PEM or DER formatted certificates can be used. Using
the length configuration for certificates and keys is optional, so existing
applications using the PEM certificates do not require changes.
QISEND command can respond either SEND OK, SEND FAIL or ERROR.
If response is not SEND OK, sent bytes should not be checked but
error should be reported.
Possible responses for send command are SEND OK<cr><ln>, SEND FAIL<cr><ln> or ERROR<cr><ln>
so normal OK<cr><ln> response check does not work properly.
Mbed TLS's export keys callback requires the hello.random (for both
server and client) to be const. Make the callbacks in Mbed OS that use
the key export feature use const to match.
Multihoming documentation about interface name:
"Two character name string is concatenated with 8 bit value containing index which is incremented on each netif addition"
Cellular uses context id as index and to follow LWIP (LWIP::Interface::get_interface_name), index does not include leading zeros.
Random initialization sequence is causing start up issues in multiple platform
when done at construction phase.
The right thing is to delay the random initialization to later stage when the
message id is actually required. This provides system to do all necessary allocation
upfront without causing any random race condition at startup phase.
A new API `CellularDevice::clear()` to clean-up the modem to a default initial state.
Function is virtual so it can be overridden. The default implementation clears all PDP contexts,
but the the first one if that has APN defined as `nsapi.default-cellular-apn`.
CellularStateMachine calls `clear()` to clean-up the modem on initial `connect()`,
if the flag `cellular.clear-on-connect: true` is defined.
mudassar-ublox
Mukund Ghonasgi
Anna Bridge
jeromecoutant
Jarkko Paso
Kimmo Vaisanen
Kyle Kearney
Christopher Haster
Ari Parkkila
Vikas Katariya
Martin Kojtal
Matthew Macovsky
Janne Kiiskila
Mika Tervonen
Mirela Chirica
Seppo Takalo
Antti Kauppila
Balaji
int_szyk
Mika Leppänen
Syed Fahimuddin Alavi
Ron Eldor
Jaeden Amero
Yogesh Pande
Darryl Green
Kostiantyn Tkachov
Tymoteusz Bloch