receive(uint32_t) API in the LoRaRadio class (base class for the radio drivers) should
not take any argument as we decided to take hardware timers for RX timeout interrupts
instead of software timers. It is being refactored to receive(void).
This is an API change, but as it is not an application interface, we will not put a
deprecation notice. Only user of this API is our stack (LoRaPHY layer) which has been updated
accordingly.
Actual driver comes out of the tree and a PR is open there to update the drivers:
https://github.com/ARMmbed/mbed-semtech-lora-rf-drivers/pull/22
In addition to this an internal API belonging to LoRaPHY class is refactored.
set_rx_window(parameters) is refactored to handle_receive(void) which is more consistent with
handle_send().
While configuring RX parameters for the radio, we need to feed in
rx windows 1 and 2 parameters which are computed when we do the transmission.
We are actually setting the physical value of the data rate rather than
data rate table index and the expectation was to set the data rate index.
band_t structure in phy parameters was not being filled in properly
and we were spilling over the array boundary for bands.
In addition to that two utility functions are added to perform safety
checking taking in the frequency and filling out band information plus
boundry value checks.
Removed the while loop checking the return value from set_next_channel
(GitHub Issue https://github.com/Lora-net/LoRaMac-node/issues/357)
The new return values are:
LORAWAN_STATUS_OK : A channel has been found.
LORAWAN_STATUS_NO_FREE_CHANNEL_FOUND : No free channel has been found (AS923 and KR920 regions)
LORAWAN_STATUS_DUTYCYCLE_RESTRICTED : No channel found due to the duty-cycle or JoinReq back-off restrictions. Trial must be delayed.
LORAWAN_STATUS_NO_CHANNEL_FOUND : No channel has been found. Re-enabled the default channels.
- Internal changes only
- reset function is created to LoRaPHY to reset LoRaMAC parameters with default values
- Doxygen updates for newly created functions
- get_phy_params function was very heavy weight and needed to be refactored.
- switch-case clauses have been refactored to be functions now and the complexity of the usage has been improved a lot.
- There are no functional changes, this is internal only change
LoRaMacChannelPlan class provides APIs which are not usable for
PHY layer implementations who do not support custom channel plans.
So we had some code in APIs which was explicitely using magic numbers
for the channel mask. Although it turned out to be not a bug as a layer
down we were checking for custom channel support. However, we now
check for custom channel support before going deep into PHY layer that will
make the code run faster and we have done some cosmetics to the code for
readability.
Channel mask is manipulated with inline methods
The PHY layer had a lot of duplicated code in various geographic regions.
In this commit we have tried to concentrate all common functionaliy into
one single class which LoRaPHY that provides three kind of methods:
i) Non virtual base methods which are there for upper layer use, e.g.,
providing access to driver or generic PHY layer functionality which
needs to be exposed to upper layers.
ii) Virtual methods (no hard limit on implementation) that can be overriden
in derived classes. Some PHY implementations will need that as they may
come with very peculiar channel schemes, e.g., dynamic channel schemes
in US bands.
iii) Protected methods which are only available for the derived PHYs
We have adopted a mechanism for the dervied PHYs to announce their differenmtiating
parameters in their constructors by filling up a data structure known as lora_phy_params_t
which exists at base level. Access modifier for this data structure is protected so it can only be
used by the base or derived classes, i.e., no exposure to upper layers.
For extra functionality and differentiating controls, a derived PHY can override any virual method as necessary.
In addition to that we have adopted the Mbed-OS style guide and have changed data structures and code to reflect that.
Some data structures are removed.
* Algorithm to get alternate DR is modified. Current scheme, works as multiples of 6 as EU and EU like PHYs
provide 6 datarates. We make sure that we try a datarate at least once. If nuber of join retries is a multiple
of 6, we may try multiple times on each data rate.
* Most of the PHYs with dynamic channel plans, always override the above mentioned algorithm as the rules governing
this algorithm do not hild in their case.
* band_t data structure is enhanced with lower band frequency and higher band frequency. That enables us to validate
frequency based upon the band and hence we can have a single function for all PHYs to validate frequency.
* In some PHYs, there were some extra channel masks were defined which were not being used. Hence removed.
* EIRP table corrected in some PHYs based upon spec.
* PHY functions in response to Mac commands are renamed to reflect what they exactly do.
for example accept_rx_param_setup_req() because that's what they do. they can either accept
the mac command or reject it.# Please enter the commit message for your changes.
Baseline is changed to use a single set of data structures that simplifies the
code in the LoRaWANStack and Mac layer. We are now following certian rules for naming
data structures.
- All structures visible outside their domain are prefixed as 'lorawan_'
- All mac structures are prefixed as 'loramac_'
- All subsystem or module strucutures carry their name in prefix, like 'mcps_'
PHY layer still have legacy camel case data structures which will be entertained
later while we will be simplifying PHY layer.
Test cases are also updated with the new data structure naming conventions.
One major difference from the previous baseline is the removal of static buffer
from mcps indication. And we do not copy data from stack buffer to rx_msg buffer.
This saves at least 512 bytes.
It may look like now that if we have received something but the user have not read
from the buffer, then the buffer will be overwritten and we will lose previous frame.
Yes, we will. But the same will happen even if we would have copied the buffer into rx_msg
because then the rx_msg gets overwritten. So we decide to abandon copying the buffer at
multiple locations. We inform the user about reception, if the user doesn't read and
the data gets overwritten, then so be it.
LoRaWANTimer is now called as LoRaWANTimeHandler class as this class handles both
current time and timer functionalities.
Some refactoring on how LoRa objects are created was needed:
- LoRaWANTimeHandler object is created by LoRaWANStack and shares with LoRaMac and PHY.
- LoRaPHY object is now member of LoRaWANStack class instead of static variable in source file.
LoRaPHY is the abstract class for the LoRa PHY layer which governs
the LoRaRadio and provides some common functionality to all regional
implementations.
We support 10 regions and every region comes loaded with default parameters.
These parameters can be changed by the Mac layer or explicitely by the stack
controller layer using APIs provided. This layer in essence detaches Mac completely
from PHY and provides more modular approach to the entire system.
Apart from class structure, the internal functionality is directly deduced from
semtech reference implementation that's why most of the internal data structures are
used on 'as is' basis.
In addition to that, the PHY layer provides APIs to control the LoRaRadio layer, i.e.,
the lora radio driver, ensuring that the radio is accessed from a single entry point.
A seperate data structure file is added which is common to PHY layers only.
Hasnain Virk
Antti Kauppila
Kimmo Vaisanen