* Refactor flash setup for MIMXRT105x devices, adds flash support for MIMXRT1062 EVK
* Remove commented code
* Use BOARD_FLASH_SIZE in boot headers
* Fix setting which should be disabled in run mode
* Fix null pointer dereferencing
Add null check for return values of functions that are mostly (but not
always) checked for null.
E.g., since 98% of calls to protocol_stack_interface_info_get_by_id
check for null, it is likely that the function can return null values in
some cases, and omitting the check could crash the program.
* Update MAX32660 peripheral drivers with final ones that use by SDK
* Apply MAX32660 delta
Update mbed hal function as per of SDK update
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M2354: Fix debug failure in Mbed Studio
In Mbed Studio, debugging, based on pyOCD, requires Mbed OS application code starting on the sector boundary.
Modification list:
1. Update TF-M import assets with MCUboot header padding to sector aligned
2. Following above, change header size argument (-H) in wrapper.py command line
3. Following below, fix min-write-size (--align) to 4 (per flash_area_align()) in wrapper.py command line
https://docs.mcuboot.com/design.html#image-trailer
Related issue:
https://github.com/ARMmbed/mbed-os/issues/15417
* Do not clear interrupt flag during initialization
This causes issue for repeaded initialization while using BufferedSerial mode
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32660, MAX32670 UART performance improvement
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* Handle negative values passed to close()
Calling close() with negative numbers causes out-of-bounds indexing of the filehandles array. For example, this can happen if open() returns an error and the value is later passed to close().
* Moved a { to the same line as if
Moved a { to the same line as if
* add nullpointer check in LWIP::socket_close
* Fix crash when using FDCAN3 RX IRQ on STM32G473 (and others)
* connectivity: drivers: Update Nuvoton M467 EMAC DMA_IE ctl
In IRQ Handler, to disable some interrupt type of DMA error.
It could avoid unexpected repeated interrupt.The masked bit of
DMA_IE could be recovered in next EMAC IRQ event.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
* Add workaround for G474 hardfault
* update drivers STM32WL CUBE V1.3.0
* Changed static to weak
* Fix: Do not disable SPI for manual drive mode during transaction setup
It has been reported that disabling SPI module causes glitch for manual SS drive mode
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* make cellular event queue size configurable
update unit tests
---------
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Ahmet Polat <Ahmet.Polat@maximintegrated.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: alrvid <126816223+alrvid@users.noreply.github.com>
Co-authored-by: Jost, Chris <79271064+chrJost@users.noreply.github.com>
Co-authored-by: Joseph Duchesne <joseph@avidbots.com>
Co-authored-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: Maxim Markin <mak22223@ya.ru>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Lukas Karel <lukas.karel@world-direct.at>
* Make it so that SPI::select() works correctly with async stuff
* Add more overloads for SPI functions, make sure that SPI::abort_transfer() correctly toggles CS
* SPI: Implement reference counting so that DMA channels get freed properly
* Fix initialization of SPI peripheral structures
* Update docs a bit
* Use a mutex to protect SPI::_peripherals instead of a critical section, because spi_free() may not be ISR safe
* Style fixes
* Remove old pico SDK, import latest version using new importer script
* Add new importer script, update CMakeLists
* Merge changes from newer SDK into init assembly and linker script
* Update pico hal code for new SDK version
* Clean up linker script a bit, revert ram size
* Fix accidental breakage of watchdog-reset test from warning fixing! Also better document USB setup procedure and disable reset as part of the test runner.
* Attempt to fix declaring an OSPIFBlockDevice as a global object
* Astyle format
* Add B_U585_IOT02A upload method support and default OSPIF mappings. Guard against incorrect case on upload method
* Also fix the same error in QSPIFBlockDevice
* Fix compile error for mbed-wifi
* Provide ScopedMutexLock for unittests mode
* Add PICO SDK
* Add RP2040 HAL implementation
* Add target Raspberry Pi Pico and its Upload method
* Modified PICO SDK-RTC because of conflict in name
* Use USB from boot, fix USB linking
* Try removing redundant init call
* Add SWD upload configuration, copy most init code from Pico SDK
* Fix RTC linking, fix ram size constant, fix test warning
* Add upload support for RPi Pico devices using Picotool
* Fix implementation of Tx IRQ for serial ports. BufferedSerial works now!
* Make PinNames.h pass pin validation
* Fix us ticker not working when debugging
* Fix us ticker double-init and manual fire interrupt function, us ticker tests now pass!
* Fix writing to rtc and rtc double-init, RTC tests now pass (except rtc-reset)
* Fix panic() not working from a critical section or ISR
* Fix compile failure due to extra LED1 definition
* Fix style
* Fix flash_api detection of invalid parameters, fix reset_reason to advertise the correct capabilities and implement them correctly
* Fix watchdog test warnings, fix broken hal_watchdog_get_reload_value(), fix missing frequency field in watchdog features
* Fix watchdog_reset failing to compile on some devices
* Fix us ticker fire_interrupt() not being callable from an ISR
* Fix incorrect license header
---------
Co-authored-by: Johnk1987 <odiin@seznam.cz>
The workaround is not needed anymore (v32 is breaking this reindexing as they created new command to do that anyway).
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
When IPv6 is prefered it will choose a link local address on a network
that lacks IPv6 over a working IPv4 network, breaking networking.
Change this behaviour to prefer a link local address only as a last
resort.
This also changes LWIP::get_ipv6_addr to not return link local
addresses. Use get_ipv6_link_local_addr instead for this.
* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436
* Fix mesh connect semaphore not releasing causing blockage
* Add support of NSAPI_ICMP sockets in Nanostack
* STM32F1: add MCU_STM32F103xD support
* STM32F1: add MCU_STM32F103xG support
* test: Disable failing tests due to echo server
Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
* Check CAN DLC length value
* Fix default interface ID only being used partially
If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.
* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.
Signed-off-by: Yilin Sun <imi415@imi.moe>
* CAN: read only up to 8 bytes
If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.
This fixes https://github.com/ARMmbed/mbed-os/issues/15361
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
* STM32F303xC: add RAM_CCM in GCC linker script
* fix(drivers/emac): Remove incorrect RMII RX ER initialization
* fix(drivers/emac): Add missing SPDX indetifier to ST driver files
* fixed compiler inline issue
* Update Mbed version block
* removed HSE speed limitation for STM32G431RB
* Added HSE range validation for STM32g431xB
* added support for 4, 8 and 16MHz
* M487: Remove unused variable 'u32EscapeFrame'
Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings
* force FIFO IRQ for FDCan RX on H7
* Add hardware CRC support to STM32G4
* add support for Nucleo-H745ZI
* Update MAX32670 peripheral drivers with final ones that use by SDK
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32670 apply mbed required changes on peripheral drivers
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M467: Support CAN bus
1. Update BSP CANFD driver
2. Notes for implementation
(1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
(2) For Rx disabling multiple filter handles,
1) Map all filter handles to filter handle 0
2) Use Rx FIFO 0 for filter handle 0
(3) For Rx enabling multiple filter handles,
1) Use Rx FIFO 0 for filter handle 0
2) Use Rx FIFO 1 for filter handle through first invoking can_filter()
3) Use dedicated Rx Buffer for other filter handles
NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
(4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
(5) Support no CAN FD.
* Fix 'new[]' array freed with 'delete'
The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.
* Define default parameters of functions of derived class the same as the base class
The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.
* Avoid calling virtual functions from constructors and destructors
Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.
* Fix potentially overrunning write of sprintf
Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.
* Fix system_clock.c location
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
* Fix variable name
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
* Change storage-class of secret_buf to static
Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.
* fix compiling errors of FATFileSystem when exFAT was enabled
* Add OSPI support for STM32H7
* Nuvoton: Enable extending sampling time for ADC/EADC
For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.
---------
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>
* Add STM32F103xD, STM32F103xG series and fix STM32F103xE startup file
* Add system_clock.c file for STM32F103xD series
* Add STM32F103xD and STM32F103xG to targets.json
* Update CMakeLists.txt to add STM32F103xD and STM32F103xG series
add_subdirectory(TARGET_STM32F103xD EXCLUDE_FROM_ALL)
add_subdirectory(TARGET_STM32F103xG EXCLUDE_FROM_ALL)
* Add remaps for STM32F1 timers as in original mbed-os
Added extra remaps for timers 9 to 14 for STM32F1 needed in STM32F103xG series
#define AFIO_REMAP_TIM9_ENABLE 17
#define AFIO_REMAP_TIM10_ENABLE 18
#define AFIO_REMAP_TIM11_ENABLE 19
#define AFIO_REMAP_TIM13_ENABLE 20
#define AFIO_REMAP_TIM14_ENABLE 21
---------
Co-authored-by: Perez <maperez@hp.com>
* STM32F7: Unconditionally enable QSPI workarounds
On the STM32769NI at least this patch is required for stable QSPI use.
Enable it uncondtionally in case other boards need it too.
Further discussions:
https://github.com/ARMmbed/mbed-os/issues/10049https://github.com/ARMmbed/mbed-os/issues/15108https://github.com/STMicroelectronics/STM32CubeF7/issues/52https://github.com/STMicroelectronics/STM32CubeF7/issues/82
* QSPIF: Attempt 4-byte addressing on Macronix chips
mbed-os PR 11531 introduced 4-byte addressing in the QSPIF block device:
https://github.com/ARMmbed/mbed-os/pull/11531
During testing it was found that this code broke on the NRF52840_DK and
DISCO_F769NI.
The NRF52840_DK controller seems unable to handle 4-byte addressing at
all and has been disabled entirely in another code section.
The DISCO_F769NI breakage was attributed to the flash chip but after more
research I believe this is related to the QSPI controller, not the 4-byte
addressing itself.
Now that the QSPI controller has a workaround, enable 4-byte addressing
again and hope it works fine this time.
* Add STM32F103xD, STM32F103xG series and fix STM32F103xE startup file
* Add system_clock.c file for STM32F103xD series
* Add STM32F103xD and STM32F103xG to targets.json
---------
Co-authored-by: Perez <maperez@hp.com>
* Start porting to Teensy 4.1, also fix some compiler warnings in FSL HAL
* Add hardware init for Teensy, refactor phy drivers, rework IMX EMAC autonegotiate code
* Revert some testing changes
* Fix incorrect phy address used outside of low_level_init_successful()
* Ethernet operational!
* Turn off DEBUG_IMX_EMAC
* Style fixes
* Style again
* Bugfix: mbed_lib.json files in project source dir were not getting picked up
* Bugfix: CLion debug configurations not generated properly due to variables going out of scope
* Support Teensy OTP MAC address
* Add clock settings for H725xE
* Correction of memory mapping for H725xE
* Added new target WIO_H725AE
* Added WIO_H725 into targets.json
* Added upload methods file for WIO_H725
* Licence filled from original source file
* Space alignment
* Added macro MBED_SPLIT_HEAP for MCU_STM32H725xE
* Typo correction
* Correction of upload methods for WIO_H725AE
* Change all debug configurations to not reset and exit on error. Initial tasks.json implementation.
* st-util working on command line and VS Code!
* Convert STM32CUBE, fix spaces in GDB server task command
* pyocd working!
* Convert OpenOCD
* Convert JLINK
* Convert REDLINK upload method
* Fix CMake typo
* Try and fix some variable scope issues
* Initial CLion implementation. Need to test with hardware.
* Add a separate task that kicks off a build before each debug session
* Fix incorrect image length in header preventing boot
* Fix ncache region being located in SEMC even on boards without it
* Don't reserve RAM for ncache anymore
* Fix crash when activating BufferedSerial on Teensy D0 and D1. Also fix incorrect daisy register mapping.
* Fix missing space in linker script
* Start on fixing incorrect MIMXRT clock frequency
* LPM working!
* Clean up LPM and clocking
* Add teensy model identifier
* Fix license headers
* device ram size is 40 kb, not 48 kB
in total RAM+RAM1 it has 48 kB, but the regions are not continous.
This error is also arm-pack index.json
* add section for CCM
* add target Blackpill-F411CE
* correction of Blackpill-F411CE
* add Blackpill to targets.json
* correction of STM32F411xE system_clock.c
* Update BLACKPILL_F411CE.cmake
Typo
* Update PinNames.h
LED correction
* Update PinNames.h
* Update BLACKPILL_F411CE.cmake
Correcting the wrong name in the Note2 about pyOCD.
* Update BLACKPILL_F411CE.cmake
Updated notes - an external debugger is required
* Initial attempt at Teensy 4.0 support
* Hide internal target
* Fix some targets.json issues, add boot code for the MIMXRT1060_EVK. It boots but tests aren't able to run properly yet.
* Disable LPTICKER on MIMXRT1060, fix pin names for newer dev kits
* Enable MIMXRT106x ethernet
* Fix for calculating CAN timing settings.
NominalPrescaler value needs to be as high as possible to ensure a good approximation of the target CAN speed.
Previous usage of macro IS_FDCAN_DATA_TSEG1 refers to (unsupported by Mbed ) FDCAN CAN controller settings and leads to too low prescaler values.
Usage Macro IS_FDCAN_NOMINAL_TSEG1 yields optimum results.
See also correct macro usage in line #158.
* Add complete support of DHCP relay interface ID option
RFC3315 specifies the following: "The relay agent MAY send the Interface-id
option to identify the interface on which the client message was received.
If a relay agent receives a Relay-reply message with an Interface-id
option, the relay agent relays the message to the client through the
interface identified by the option."
The current implementation of the DHCP relay reply handling, the interface
ID field from the server response is ignored. Managing the interface ID
is very important especially as DHCP requests/replies use link-local
addresses. The consequence of this is that the interface must always be
specified because the routing layer cannot guess the correct interface.
Moreover, Mbed provides a mechanism to enable/disable the interface ID
option on a DHCP relay instance, so it is important to fully support it.
The reason why this issue has not been discoverd until now is that the DHCP
relay is mainly used on systems that use only one interface (such as Wi-SUN
routers). By default, when no interface ID is specified for the socket, the
latter will choose 6loWPAN interface by default. This means that if two
interfaces are used on the same device, the 6loWPAN interface is always
selected.
The commit adds code to retrieve the interface-id value contained within
the DHCP relay reply message and write it to a control message header
that is added to the socket message. This tells the socket which
interface to choose. If the interface-id option is not enabled on the
relay, this procedure is simply ignored.
* Support Nuvoton target NUMAKER_IOT_M467
1. Based on alpha version BSP (85564a2716548e7b6d6a79a490c6d94a24cf9bcf)
2. Continuing above, tweak BSP:
(1) Add EPWM_ConfigOutputChannel2() to enable below 1Hz and below 1% duty cycle for PWM output (m460_epwm.h/c).
(2) Add dummy RTC_WaitAccessEnable() for consistency with previous ports (m460_rtc.h).
3. Target NuMaker-M467HJ V0.1 board temporarily
4. Support Arduino UNO form factor for NUMAKER_IOT_M467 target
5. Enable export to Keil/IAR project
- tools/arm_pack_manager/index.json
- tools/export/iar/iar_definitions.json
* M467: Fix Greentea reset_reason test failure
HRESETRF is combined reset flag. Filter it out to avoid interference with reset reason check.
* M467: Support HyperRAM
1. For GCC, support multi-block .data/.bss initialization
2. HyperRAM is mapped to two regions: 0x0A000000 and 0x80000000
According to default system address map, 0x0A000000 is located at 'Code' region and 0x80000000 at 'RAM' region.
With MPU enabled on Mbed OS, 'Code' region is write-never and 'RAM' region execute-never.
0x80000000 is chosen because 'RAM' regioin is naturally for HyperRAM.
3. Configurable multi-function pins for HBI
4. To locate code/data at external HyperRAM:
- Specify __attribute__((section(".text.nu.exthyperram"))) for RO/.text/readonly section type
Invoke mbed_mpu_manager_lock_ram_execution()/mbed_mpu_manager_unlock_ram_execution() to run HyperRAM code
- Specify __attribute__((section(".data.nu.exthyperram"))) for RW/.data/readwrite section type
- Specify __attribute__((section(".bss.nu.exthyperram"))) for ZI/.bss/zeroinit section type
5. Add readme
* Config for M460 EMAC
* Add M460 EMAC driver
* Adjust M460 EMAC RX/TX buffer
* M467: Fix EMAC compile error with IAR
* M467: Support Crypto SHA/ECC H/W
1. Prepare crypto common code
2. Support list
- SHA
- ECC
NOTE: AES/RSA are to support in other works
NOTE: Compared to M487, M467's SHA supports context save & restore (DMA Cascade mode) and so no software fallback is needed.
NOTE: M467's ECC, following M487, goes partial-module replacement and it can just improve primitives e.g. point addition/doubling by 2X,
and cannot improve high level point multiplication because MbedTLS doesn’t open it.
To improve performance best, full-module replacement is needed.
NOTE: Continuing above, add support for Montgomery curve
* M467 H/W AES self-test pass
* M467 Support crypto GCM H/W
* M467: GCM support one simple mode instead of using composite GHASH & CTR MODE
* Update M467 AES-GCM to pass AWS-IoT test
* Update M467 AES-GCM for H/W gcm in-buffer creteria
* M467: Improve Crypto H/W wait helper routine
Add crypto_xxx_wait2 helper routine to replace crypto_xxx_wait for Crypto H/W control
* M467: Seed PRNG with TRNG for SCAP
According to TRM, it is suggested PRNG be seeded by TRNG on every Crypto H/W reset.
* M467: Support Crypto RSA H/W
1. Crypto RSA H/W supports 1024/2048/3072/4096 key bits. Fall back to software implementation for other key bits.
2. For decrypt, if MBEDTLS_RSA_NO_CRT isn't defined, go CRT, or normal.
3. For decrypt, when blinding (f_rng != NULL), enable SCAP mode.
4. Recover from Crypto RSA H/W failure:
(1) Enable timed-out wait to escape from RSA H/W trap
(2) On RSA H/W timeout, stop this RSA H/W operation
(3) Fall back to S/W implementation on failure
NOTE: RSA 4096 key bits can fail with default mbedtls configuration MBEDTLS_MPI_MAX_SIZE.
Enlarge MBEDTLS_MPI_MAX_SIZE to 1024 or larger if this feature is required.
NOTE: Fixed in BSP RSA driver, for non-CRT+SCAP mode, temporary buffer for MADDR6 requires to be key length plus 128 bits.
NOTE: Fixed in BSP RSA driver, DMA buffer must be 4-word aligned, or RSA H/W will trap.
* M467 Support crypto AES-CCM H/W with one-shot & cascade mode
* M467: Support Crypto ECC H/W in full-module replacement
1. Replace ecp.c full-module, and other ec modules dependent on ecp.c (ecdh.c/ecdsa.c/ecjpake.c) will improve followingly.
2. Recover from Crypto ECC H/W failure:
(1) Enable timed-out wait to escape from ECC H/W trap
(2) On ECC H/W timeout, stop this ECC H/W operation
(3) Fall back to S/W implementation on failure
3. Support Short Weierstrass curve
4. Support Montgomery curve
Montgomery curve has the form: B y^2 = x^3 + A x^2 + x
(1) In S/W impl, A is used as (A + 2) / 4. Figure out its original value for engine.
2eb06e7620/connectivity/mbedtls/include/mbedtls/ecp.h (L219-L220)
(2) In S/W impl, B is unused. Actually, B is 1 for Curve25519/Curve448 and needs to configure to engine.
2eb06e7620/connectivity/mbedtls/include/mbedtls/ecp.h (L221-L222)
(3) In S/W impl, y-coord is absent, but engine needs it. Deduce it from x-coord following:
https://tools.ietf.org/id/draft-jivsov-ecc-compact-05.htmlhttps://www.rieselprime.de/ziki/Modular_square_root
NOTE: Fix Curve448 has wrong order value
https://github.com/Mbed-TLS/mbedtls/pull/5811
* M467: Disable SCAP in RSA H/W
This is to follow designer's resolution.
* M467: support fullspeed usb device
* M467: Fix mbedtls_ecp_point_cmp() call with null argument
Guard from null argument passed to mbedtls_ecp_point_cmp() in ECC H/W port
* M467: Make mbedtls H/W port removable
Some M460 chips don't support AES/SHA/ECC/RSA H/W.
Make them removable from mbedtls H/W port through '"target.macros_remove": ["MBEDTLS_CONFIG_HW_SUPPORT"]'.
* Added TMPM4NR Platform
New Platform for Toshiba Added
* Removed UTF8 Chars
* M467: I2C: Fix potential role switch failure
Fix in i2c_do_trsn(), interrupt doesn't change back to enabled due to premature return.
* M467: Exclude UNO SPI pins from FPGA CI Test Shield test
UNO D8/D9/D10/D11/D12/D13 can wire to on-board SPI flash.
Exclude these pins from FPGA CI Test Shield test.
* M467: Adjust UART pinmap to pass FPGA CI Test Shield test
* M467: Support NuMaker-IoT-M467 board
Pinout comparison between NuMaker-M467HJ and NuMaker-IoT-M467 boards:
1. UNO are unchanged
2. LEDs are unchanged
3. Buttons are unchanged, except button names
4. NuMaker-M467HJ has HBI but NuMaker-IoT-M467 does
5. NuMaker-M467HJ doesn't have ESP8266 but NuMaker-IoT-M467 does
6. SDHC are unchanged
* Nuvoton: I2C: Fix potential role switch failure
Fix in i2c_do_trsn(), interrupt doesn't change back to enabled due to premature return.
Fix targets:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
- NUMAKER_PFM_M487/NUMAKER_IOT_M487
- NUMAKER_IOT_M252
- NUMAKER_IOT_M263A
- NU_M2354
* Update can_api.c
Modified comment as discussed.
* M467: Remove invalid UTF-8 byte sequence
* Replace MAX32660, MAX32670 I2C driver with final one in MSDK
- apply clang-format
- Fix i2c repeated start issue
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* Add proper support for NUCLEO-H723ZG.
- add board specific EMAC setup to connectivity/drivers/emac/TARGET_STM/TARGET_STM32H7
- stm32h7_eth_init.c was derived from the NUCLEO-H743ZI2 code whilst comparing to the output of STM32CubeIDE
- complete board specific code in targets/TARGET_STM/TARGET_STM32H7/TARGET_STM32H723xG
- PeripheralPins.c and PinNames.h were created by targets/TARGET_STM/tools/STM32_gen_PeripheralPins.py
- ST ZIO connector pins in PinNames.h have been adapted from NUCLEO-H743ZI2
- CONSOLE_TX and CONSOLE_RX have been interchanged in PinNames.h to match the actual board layout
- startup_stm32h723xx.S was derived from startup_stm32h743xx.S
- stm32h723xg.ld was completely rewritten to match the actual MCU including:
- split heap support
- SRAM2 and SRAM4 support
- crash dump support
- proper use of DTCM as stack
- system_clock.c has been changed to support the maximal main clock speed of 550 MHz
- fix handling of HS in FS mode for the target board in targets/TARGET_STM/USBPhy_STM32.cpp
- add board definition to targets/targets.json and correct linker setup for the chip
Signed-off-by: Daniel Starke <daniel-email@gmx.net>
* Fix I2C for MCU_STM32H723xG
Add I2C configuration to MCU_STM32H723xG in target.json as suggested by @jeromecoutant.
Signed-off-by: Daniel Starke <daniel-email@gmx.net>
* Correct MAX32620 boards macro for USB library.
* Limit NUCLEO_H723ZG toolchain to GCC_ARM
Limit NUCLEO_H723ZG toolchain to GCC_ARM only.
This is the only toolchain this target has been tested with yet.
Signed-off-by: Daniel Starke <daniel-email@gmx.net>
* M2354 support FS-USBD and update TF-M for USB PHY select
* Rethink STM32 I2C v2 HAL
* Add documentation for I2C_EVENT macros
* Add some additional I2C error codes
* Added TMPM4GR Platform
New Platform for Toshiba Added
* Resolve delimeter issues for target.json
* Fix compile error on static pinmap targets
* github: Fix click version
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Daniel Starke <daniel-email@gmx.net>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: chdelfs <109847651+chdelfs@users.noreply.github.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: cyliangtw <cyliang@nuvoton.com>
Co-authored-by: Deepak V. Shreshti <DeepakVS@TOSHIBA-TSIP.COM>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Daniel Starke <daniel-email@gmx.net>
Co-authored-by: Ahmet Alincak <Ahmet.Alincak@maximintegrated.com>
Co-authored-by: Jamie Smith <smit109@usc.edu>
Co-authored-by: Jamie Smith <jsmith@crackofdawn.onmicrosoft.com>
* Start working on fixing doxygen warnings
* Upgrade doxyfile to Doxygen 1.9.1
* Clean up some unmatched groups and add some exclusions
* Fix docs for rtos::ThisThread not showing up
* Fix up KV store docs
* Fix incorrect @files, some more incorrect groups
* Fix lots of broken links
* Start fixing mbedtls groups
* Fix more mbedtls docs
* Fix remaining mbedtls files with missing or incorrect grouping
* Fix a huge amount of PSA docs errors
* Fix a few more mbedtls docs errors
* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors
* Fix some broken doc links in HAL headers
* Fix more PSA doc errors
* Fix some doxygen errors in networking code
* Fix lots of network related doc errors
* Try and fix some CI failures
* Use Doxygen Action instead of doxygen in Mbed container to get the right version
* Try removing docs check
* Add first part of doxygen action
* Add next part of doxygen action
* Fix yaml syntax error
* Add in license check fix
* Try using verbose scancode
* Fix some more docs issues, workaround scancode-toolkit#3179
* Clean up the LoRaRadio get_state() function on each implementation. Also fix some other compile and doc errors.
* Fix all remaining doxygen errors
* Fix escaping, for realsies this time
* Remove Doxygen unsupported config options, fix some more get_status() declarations
* Fix some UNITTESTS build errors
* Fix one more compile error
* Another unittest error
* Fix build of BlueNRG components by making them their own targets
* Link ble cordio to fix link order dependency
* Fix typo breaking STM32L562 build
* Revert "Link ble cordio to fix link order dependency"
This reverts commit 1a9192f01f8ecf152c00c777bcfe880a34434d25.
Jamie Smith
JohnK1987
timIdeaTech
JojoS
Jookia
Janco
Ladislas de Toldi
Jay Sridharan