* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436
* Fix mesh connect semaphore not releasing causing blockage
* Add support of NSAPI_ICMP sockets in Nanostack
* STM32F1: add MCU_STM32F103xD support
* STM32F1: add MCU_STM32F103xG support
* test: Disable failing tests due to echo server
Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
* Check CAN DLC length value
* Fix default interface ID only being used partially
If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.
* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.
Signed-off-by: Yilin Sun <imi415@imi.moe>
* CAN: read only up to 8 bytes
If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.
This fixes https://github.com/ARMmbed/mbed-os/issues/15361
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
* STM32F303xC: add RAM_CCM in GCC linker script
* fix(drivers/emac): Remove incorrect RMII RX ER initialization
* fix(drivers/emac): Add missing SPDX indetifier to ST driver files
* fixed compiler inline issue
* Update Mbed version block
* removed HSE speed limitation for STM32G431RB
* Added HSE range validation for STM32g431xB
* added support for 4, 8 and 16MHz
* M487: Remove unused variable 'u32EscapeFrame'
Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings
* force FIFO IRQ for FDCan RX on H7
* Add hardware CRC support to STM32G4
* add support for Nucleo-H745ZI
* Update MAX32670 peripheral drivers with final ones that use by SDK
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32670 apply mbed required changes on peripheral drivers
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M467: Support CAN bus
1. Update BSP CANFD driver
2. Notes for implementation
(1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
(2) For Rx disabling multiple filter handles,
1) Map all filter handles to filter handle 0
2) Use Rx FIFO 0 for filter handle 0
(3) For Rx enabling multiple filter handles,
1) Use Rx FIFO 0 for filter handle 0
2) Use Rx FIFO 1 for filter handle through first invoking can_filter()
3) Use dedicated Rx Buffer for other filter handles
NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
(4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
(5) Support no CAN FD.
* Fix 'new[]' array freed with 'delete'
The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.
* Define default parameters of functions of derived class the same as the base class
The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.
* Avoid calling virtual functions from constructors and destructors
Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.
* Fix potentially overrunning write of sprintf
Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.
* Fix system_clock.c location
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
* Fix variable name
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
* Change storage-class of secret_buf to static
Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.
* fix compiling errors of FATFileSystem when exFAT was enabled
* Add OSPI support for STM32H7
* Nuvoton: Enable extending sampling time for ADC/EADC
For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.
---------
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>
* Start porting to Teensy 4.1, also fix some compiler warnings in FSL HAL
* Add hardware init for Teensy, refactor phy drivers, rework IMX EMAC autonegotiate code
* Revert some testing changes
* Fix incorrect phy address used outside of low_level_init_successful()
* Ethernet operational!
* Turn off DEBUG_IMX_EMAC
* Style fixes
* Style again
* Bugfix: mbed_lib.json files in project source dir were not getting picked up
* Bugfix: CLion debug configurations not generated properly due to variables going out of scope
* Support Teensy OTP MAC address
* Start working on fixing doxygen warnings
* Upgrade doxyfile to Doxygen 1.9.1
* Clean up some unmatched groups and add some exclusions
* Fix docs for rtos::ThisThread not showing up
* Fix up KV store docs
* Fix incorrect @files, some more incorrect groups
* Fix lots of broken links
* Start fixing mbedtls groups
* Fix more mbedtls docs
* Fix remaining mbedtls files with missing or incorrect grouping
* Fix a huge amount of PSA docs errors
* Fix a few more mbedtls docs errors
* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors
* Fix some broken doc links in HAL headers
* Fix more PSA doc errors
* Fix some doxygen errors in networking code
* Fix lots of network related doc errors
* Try and fix some CI failures
* Use Doxygen Action instead of doxygen in Mbed container to get the right version
* Try removing docs check
* Add first part of doxygen action
* Add next part of doxygen action
* Fix yaml syntax error
* Add in license check fix
* Try using verbose scancode
* Fix some more docs issues, workaround scancode-toolkit#3179
* Clean up the LoRaRadio get_state() function on each implementation. Also fix some other compile and doc errors.
* Fix all remaining doxygen errors
* Fix escaping, for realsies this time
* Remove Doxygen unsupported config options, fix some more get_status() declarations
* Fix some UNITTESTS build errors
* Fix one more compile error
* Another unittest error
This patch contains improvements mentioned in the unresolved PR
comments:
- function names were changed from socket_sendmsg/socket_recvmsg to
socket_sendto_control/socket_recvfrom_control.
- default implementation of this functions was provided in the
NetworkStack class.
- MsgHeaderIterator accesses elements on the aligned addresses.
The header `mbed.h` is a convenient wrapper that pre-includes some
platform headers, for use by user applications. Libraries and tests
internal to Mbed OS should not use it, and they should explicitly
include headers they need. So a stub is not needed.
Previously a test executable was recognised as a single test by CTest.
However, test executables usually contain multiple test cases, the
results of the test cases should be individually reported. With our
previous setup we could miss test case failures that didn't cause the
executable to return an error code.
This commit uses gtest_discover_test to discover all test cases in a
test executable. This enables CTest to match test passes and failures
from the googletest binary output.
The CMake target `mbed-headers` brings in all
headers, and we are gradually moving away from it and explicitly use
only headers needed by each unit test.
Some netsocket unit tests depend on nanostack-libservice library, but
should use stubs instead of including the source files. We remove the
source files and link to mbed-stubs-nanostack-libservice.
Some source files included when building netsocket unit tests with CMake
were determined to be unused by removing the files from target_sources()
and verifying that the tests still built and ran successfully. These
files have been removed from CMake builds.
Previously all nanostack libservice headers part of
mbed-headers-connectivity. This PR moves all the nanostack
libservice headers into newly added mbed-headers-nanostack-libraries.
This makes the nanostack libservice stubs more self-contained and
improves the composition of the library.
Update netsocket and lorawan unit tests to link with a mbed-stubs-mbedtls
library that it depends on instead of link with mbed-stubs
which is a group of stubs libraries.
Move the connectivity mbedtls stubs into the connectivity/mbedtls
component directory. So we can avoid duplicating the mbed-os source
tree in a central UNITTESTS folder.
- Previous changes moved all rtos stubs headers into mbed-stubs-rtos-headers
lib, but the decision to keep all stubs headers under the respective
component stubs library so moved all stubs rtos headers under
mbed-stubs-rtos and updated it depend component CMake
- Remove unnecessary add_definition call for UNITTEST as any of the stubs library
added from UNITTEST/CMakeLists.txt is not required this macro
Previously all the netsocket stubs headers under mbed-stubs-headers,
so this PR move all netsocket stubs headers under
netsocket/tests/UNITTESTS/double directory and update CMake to include
stubs headers into mbed-stubs-netsocket library to make netsocket stubs
to be self-contained.
- Previously, all netsocket headers made as a part of the
mbed-headers-connectivity library. To make it easier to separate all
the netsocket headers into the separate mbed-headers-netsocket library
and keep them, as part of netsocket stubs CMake. This makes the
netsocket stubs more self-contained and improves the composition of the library.
- Update cellular, netsocket unit tests to link only with a mbed-headers-netsocket
library that it depends on instead of link with mbed-headers
which is a group of headers libraries.
Update netsocket and cellular unit tests to link with a mbed-stubs-netsocket
library that it depends on instead of link with mbed-stubs
which is a group of stubs libraries.
Move the connectivity netsocket stubs into the connectivity/netsocket
component directory. So we can avoid duplicating the mbed-os source
tree in a central UNITTESTS folder.
- Previously all cellular header made as a part of the
mbed-headers-connectivity library. To make it easier to separate all
the cellular headers into the separate mbed-headers-cellular library
and keep them as part of cellular stub CMake. This makes the cellular
stubs more self-contained and improves the composition of the library.
- Update all unit test that depends on cellular headers with mbed-headers-cellular library
Move the connectivity cellular into the connectivity/cellular component
directory. So we can avoid duplicating the mbed-os source tree in a
central UNITTESTS folder.
Assumption that greentea test file is always named main.cpp is
incorrect. Updated mbed_greentea_add_test() macro to make TEST_SOURCES
parameter compulsory, which is used to specify greentea test
file(s). This allows tests to use C, or have a different name.
Therefore also updated all pre-existing greentea test CMake files to
explicity add main.cpp to TEST_SOURCES.
- Remove redundant cmake script as already added the CMake configuration file
- Remove redundant empty_baseline as it is no longer needed with the help of CMake configuration file
Jamie Smith
Jamie Smith
Jerome Coutant
mateusz.kalinowski
Tymoteusz Bloch
Lingkai Dong
Robert Walton
Hari Limaye
Rajkumar Kanagaraj
Jaeden Amero
Bora Özgen
plan-do-break-fix
Paul Szczepanek
Paul Szczepanek
Hugues Kamba
Martin Kojtal
Arto Kinnunen
Balaji Subramanyam