ESP8266Interface::connect() checks the exact return value from
the underlying ESP8266::connect() call.
Increased timeout for network-wifi greentea tests to 6 minutes.
The addresses dont have to change each run, just be unique.
Because address seeds repeat themselves each run, rand() will
produce repeating results that should not collide between
different threads.
- Remove dependency to yotta tool
- Do not remove stored (GET) blockwise message when EMPTY ACK received. When non piggybacked response mode is used original GET request must not be removed from the stored message list.Message is needed for building the next (GET) blockwise message.
- Move definitions to sn_config.h
Port of NUC472/M487 crypto AC mgmt work to M2351:
1. Choose mutex to synchronize access to crypto non-SHA AC
2. Choose atomic flag to synchronize access to crypto SHA AC
When building secure targets, we would like compile only files that are in the the mbe-os root folder.
This Fixes an issue when sending multiple --source parameters that are all inside the mbed-os tree
1. Removed random i/o glitches occurring during device reconfiguration
2. Fixed hazardous reads occurring at the end of transfer resulting
in incorrect values being received
3. Added spi_free() function
4. Replaced default M0 image with a one ignoring i/o reservation. This is
a workaround for missing proper destructors in Mbed drivers and BlockDevice
tests failing on repeated initialization
Fixes issue #9620.
Add support for listing all the pins of one or more form factors.
This is in preparation for automated testing of the default form
factor.
This patch includes the following:
-A function to get a list of restricted pins which should not be
used for testing due to some caveat.
-The target config "default-form-factor" which can specify which form
factor should be tested
-Form factor information for the arduino form factor
Add 2 new pinmap utility functions:
-pinmap_find_peripheral_pins
-pinmap_list_has_pin
Also add the new type PinList which contains a list of pins allowing
for NC and duplicate entries.
Add the functions qspi_master_sclk_pinmap, qspi_master_ssel_pinmap and
qspi_master_data0_pinmap-qspi_master_data3_pinmap to all targets with
qspi support.
Add prebuilt WICED libraries for the PSoC 6 boards with WICED radios:
* TARGET_CY8CKIT_062_4343W
* TARGET_CY8CKIT_062_WIFI_BT
* TARGET_CY8CPROTO_062_4343W
* TARGET_CYW943012P6EVB_01
Add required extra labels to the PSoC 6 targets in targets.json:
(PSOC6_01/02 labels are used during the library compilation).
Add Cypress HCI driver implementation in TARGET_Cypress directory.
Update targets.json to enable CORDIO stack for Cypress PSoC 6 boards
with CYW43XXX radios with compatible HCI driver implementation:
CYW4343W and CYW43012.
TARGET_CYW4343X Bluetooth HCI driver is specific to STM32 targets
derived from USI_WM_BN_BM_22. Move the driver implementation to
TARGET_STM folder to not interfere with Cypress implementation at
TARGET_Cypress/TARGET_CYW43XXX/HCIDriver.cpp that is enabled for
PSoC 6 targets which also include the CYW4343X label.
Aleksi Klasila
Michal Paszta
Jimmy Brisson
offirko
Fahim Alavi
ccli8
Martin Kojtal
Oren Cohen
Antti Yli-Tokola
Michael Schwarcz
Alexander Zilberkant
Leszek Rusinowicz
Russ Butler
Mirela Chirica
Anna Bridge
Amanda Butler
Volodymyr Medvid
Nir Sonnenschein