7135c6545a
Merge pull request #14215 from flippy84/master
...
STM: Fix Hal_GetTick wrap around errors
2021-02-03 14:17:59 +00:00
78bbe274f1
Merge pull request #14203 from kylejansen/sdpk1-usb
...
Adding USB HS Support to the SDP-K1
2021-02-03 14:17:43 +00:00
38b9e8ee5f
STM: prevent task switch errors in HAL_GetTick
2021-02-03 09:42:15 +01:00
c401b61c09
Adding USB HS Support to the SDP-K1
2021-01-27 16:50:37 +00:00
dc969ba1d9
After checking other parts of the code (trng_api.c and a few other board platforms (NUCLEO_F413ZH, ...)) it appears that even though the reset value defaults correctly it may be good practice to keep the HAL_RCCEx_PeriphCLKConfig statement that selects the HSI48CLK as source for USB/RNG.
2021-01-26 03:51:49 +01:00
21176e903a
Removed the HAL_RCCEx_PeriphCLKConfig statement that was selecting the HSI48 CLK for USB. Assumption is that the STM32G4 reset value (defaults to HSI48 selected for USB) is preserved throughout Mbed initialization.
2021-01-26 03:27:37 +01:00
80f0a378fb
Updated to enable HSI48 Clock also for USBDEVICE define in targets.json. Also added so that the CK48 Clock Mux selects HSI48 for both RNG and USB. Without these the RNG/USB will be clocked at PLLQ (170 MHz) and not work.
2021-01-26 02:51:03 +01:00
99d21b6a92
Fixed whitespaces (a tab that should be spaces)
2021-01-26 01:21:46 +01:00
fa0474239b
Autogenerated file using 'python targets/TARGET_STM/tools/STM32_gen_PeripheralPins.py -t M40_Nucleo_NUCLEO-G431KB'. Had to do some modifications since the autogenerated files contained errors.
2021-01-24 04:25:42 +01:00
f871eff405
Reverted to a pure copy of 474RE system_clock.c since it was updated with RNG clock fixes. Removing USB Clock enablement (USB will not work out-of-the box but will require users to modify system_clock.c to enable its clock) - this inline with changes to targets.json where I removed the USBDEVICE define
2021-01-24 03:18:06 +01:00
173cc1fe29
Cleaning out workaround patches for G431KB now that Flash Bank Switching has been fixed on G4xxx level (ARMmbed/mbed-os patch #14149 )
2021-01-24 02:44:09 +01:00
e4fb7402c3
Fixed a typo (incorrectly referring to G474RE instead of G431KB)
2021-01-24 02:41:18 +01:00
3ff04fa81e
Cleaned up and verified file
2021-01-24 02:15:22 +01:00
1389b1ac9d
Adding CMakeLists.txt files for NUCLEO_G431KB
2021-01-24 02:15:21 +01:00
0368cab27b
Add: Added STM32G4 series to LP USB list
2021-01-24 02:15:21 +01:00
d720792191
G431 only has 1 Flash Bank. Code is written with the assumption all G4 devices has 2 Flash Banks. Fix: Commented out SYSCFG_MEMRMP_FB_MODE since stm32g431KB only has 1 Flash Bank. flash_api.c checks for this #define and if it's set understands it as if the chip has 2 flash banks. STM32G4xx_HAL_Driver/stm32g4xx_hal.c also needs to check for this #define since it has flash bank swapping commands that are called in the startup sequence. Fix: Check for SYSCFG_MEMRMP_FB_MODE in Enable/Disable Flash bank swapping.
2021-01-24 02:15:21 +01:00
98e48828b1
Fix: Added ALIGN(8) for __etext section. This existed in mbed-6.3.0 version. I have not verified if it is truly needed, but it is better to err on the safe side.
2021-01-24 02:15:21 +01:00
5bd272aabc
Adding support for NUCLEO_G431KB. Created this file based on G474RE file. Added support for USB - connected the HSI48 clock to USB (and RNG). Warning: I'm assuming Flash latency is the same as for G474RE.
2021-01-24 02:15:21 +01:00
70bd5b916d
Adding support for NUCLEO_G431KB. Created this file based on G474RE. I have done a decent effort to port it / check it. However - Warning - Not everything is verified the the G431 Spec Sheets.
2021-01-24 02:15:21 +01:00
936467ebab
Adding support for NUCLEO_G431KB. Created this file based on G474RE. Fully verified with Spec Sheets
2021-01-24 02:15:21 +01:00
5f541b22d0
Merge pull request #14142 from hugueskamba/hk_heap_size_fix_stm32l4
...
STM32L4: Correct heap size formula
2021-01-20 14:58:45 +00:00
f7d1f18a80
Merge pull request #14144 from sstaub/STM32-Arduino-Pinnames
...
Update for Arduino Pinnames
2021-01-20 08:34:56 +00:00
6969140110
Merge pull request #14023 from kylejansen/sdpk1-qspi
...
Adding QSPI support to SDP-K1 board support package.
2021-01-20 08:34:38 +00:00
8dc27fd84e
Merge pull request #14154 from jeromecoutant/PR_STM32_CMAKE
...
STM32: correct cmake compilation issues
2021-01-19 09:22:49 +00:00
c4c28773aa
Merge pull request #14149 from jeromecoutant/PR_G4
...
STM32G4: enable TRNG and correct dual bank flash detection
2021-01-19 09:19:37 +00:00
95a524ae25
Merge pull request #14145 from arduino/config_sd_transceiver
...
STM32H7: disable uSD transceiver
2021-01-18 08:49:02 +00:00
eff0d4c8b9
Merge pull request #14032 from jeromecoutant/PR_RESET_GPIO
...
STM32: RESET GPIO during init is configurable
2021-01-15 15:49:11 +00:00
1bbceb48f0
STM32 / CMAKE / targets : correct CMakeLists.txt files
2021-01-15 15:11:16 +01:00
aef93ca7c9
Merge pull request #14020 from pea-pod/stm-spi-more-bits
...
Add SPI bitwidths to ST targets where supported
2021-01-15 10:01:28 +00:00
2e905a0060
Merge pull request #14104 from hugueskamba/hk_cmake_fix_STM32F413xH_sysclock_listing
...
CMake: Fix the listing of system_clock.c for STM32F413xH
2021-01-14 17:16:34 +00:00
61d00d858f
STM32G4: dual bank FLASH detection
2021-01-13 16:45:03 +01:00
eb627788ca
STM32G4: TRNG enabled
...
+ some cleanup/optimisation in SetSysClock
2021-01-13 16:44:57 +01:00
24132695e3
These targets have a different memory layout,
...
they have two RAMs at two distinct locations:
RAM1 (address: MBED_RAM_START, size: MBED_RAM_SIZE):
* stack
* heap
* some part of static memory
RAM2 (address: MBED_IRAM2_START, size: MBED_IRAM2_SIZE):
* remaining part of static memory starting at MBED_IRAM2_START
* crash report
* vector
2021-01-13 12:46:35 +00:00
df4e397004
STM32H7: disable uSD transceiver
2021-01-13 11:13:15 +01:00
c3dca94b78
Update for Arduino Pinnames
2021-01-12 22:43:42 +01:00
61059d45e4
STM32F439 : correct cmake compilation
2021-01-11 18:07:58 +01:00
1a90deb608
CMake: Fix the listing of system_clock.c for STM32F413xH
...
Each variant now has its own system_clock.c file.
Therefore ensure the correct one is added for each variant.
Also reduce the number of CMakeLists.txt file as each
variant does not have significant number of files.
2021-01-11 16:17:46 +00:00
e1c754b179
Add SPI bitwidths to ST targets where supported
2021-01-11 07:53:07 -06:00
331cebe5eb
Merge pull request #14133 from hugueskamba/hk_heap_size_fix_stm
...
STM: Fix heap size formula in scatter files
2021-01-11 13:38:37 +00:00
b7c639580f
Merge pull request #14066 from jeromecoutant/DEV_F2
...
STM32F2 update drivers version to CUBE V1.9.2
2021-01-11 11:27:09 +00:00
a3fccf7d21
STM: Fix heap size formula in scatter files
...
The heap size was incorrectly calculated.
This fixes it by subtracting the Stack size, any memory chunks allocated
before the start of the application (for vectors and/or crash report), and
finally the size of the application from the total RAM size.
2021-01-08 18:18:40 +00:00
d0cd5fa5f1
Merge pull request #13826 from arduino/portenta-mainline
...
Add Arduino Portenta H7 as target
2021-01-05 15:49:44 +00:00
62b6cc9a05
cmake: STM32H7: enable PORTENTA* target
2021-01-05 14:49:37 +01:00
d689e90917
STM32: RESET GPIO during init is configurable
...
Default value is disabled
2021-01-05 13:56:07 +01:00
26f758d83c
cmake: STM32H7: fix stm32h747 targets
...
This needs to be defined for "final" targets not contained in their processor subdirectory
2021-01-04 18:04:03 +01:00
c4ccccedf5
STM32F2: ST CUBE drivers update V1.6.0 => V1.9.2
2020-12-15 18:06:21 +01:00
b9a61de109
STM32F2: alignment with other families
2020-12-15 18:06:20 +01:00
f449a61da6
STM32F2: directory restructuration
...
Only files move and targets.json updated accordingly
2020-12-15 18:06:20 +01:00
04ac8a08b3
STM32H7: FDCAN: use PLL1Q frequency for calculations
2020-12-11 14:10:06 +01:00
eaa3b0f285
PORTENTA_H7: use default linker/startup scripts
2020-12-11 10:11:55 +01:00
Martin Kojtal
Andreas Carlsson
kylejansen
Tauno Magnusson
jeromecoutant
Hugues Kamba
pennam
Stefan Staub
pea-pod
Martino Facchin