Setting ""nsapi.dns-cache-size": 0" still left some of the DNS
caching code in. Add crude #if to remove all of it.
This allows one to save 429 bytes of flash and 48 bytes of RAM on
ARMC5 builds.
* Move IP Socket stuff to InternetSocket class which is inherited by TCP/UDP
* Implement sendto() and recvfrom() on TCP socket
* Implement connect() call on UDP
* Implement send() and recv() calls on UDP socket
Code was written using MBED_CONF_DEFAULT_* but the mbed_lib.json file
that created these values is prefixed with "nsapi" and therefore
final macros are MBED_CONF_NSAPI_DEFAULT_*
Currently, if all TX descriptors are in use and IP stack calls K64F/K66F
ethernet driver link out, link out drops the packet. Added 10ms delay
to link out to wait for a descriptor to become available before dropping
the packet.
Changed K64F/K66F power up to return without waiting for link up i.e. for
the ethernet cable to be connected. This is needed for non-blocking use
of driver e.g. for using the driver from event queue.
Two cascading copy-paste errors stopped this working:
* PPPCellularInterface::get_gateway() called
nsapi_ppp_get_ip_address();
* nsapi_ppp_get_gateway() called the interface's get_netmask().
First bug has always been there - second one was introduced in 5.9.
AT_CellularNetwork currently lacks calls to get both netmask and gateway
- this patch would be needed for that when added.
When all TX descriptors were reserved in a row so that TX buffer
reclaim interrupt did not happen during reservation sequence, after
the interrupt occurred, TX buffer reclaim did no longer free buffers.
This happened because when all descriptors were in use, last free
index pointed to consumed index.
TX pointer array was using RX ring length in its declaration.
Wasted memory if RX ring > TX ring, as is the default, but would
be broken if RX ring < TX ring.
16 RX buffers and 8 TX buffers is probably excessive. Nanostack
version of driver successfully used 4+4, and data pump should be
broadly equivalent.
This means that switching K64F devices from Nanostack to EMAC increases
base heap usage by 18K - observed in Nanostack border router builds.
Add a config option to make it possible to lower the number of buffers.
Defer consideration of lowering the default to later.
DNS resolver now counts how many sendto operations are successful
during one DNS server attempt cycle (attempting to contact DNS
servers from 0 to last index, including stack specific ones). If all
socket sendto operations fail, DNS resolution is aborted.
If one or more are successful, DNS resolution is continued until
total network attempts count is reached or all sendto operations
fails during a cycle.
- Set network stack to store event queue so that mbed::mbed_event_queue() call
is not needed every time call_in() is called
- Added dns state variables and enum (states are: created, initiated and cancelled)
- Corrected DNS response handling so that if DNS server returns that host name is
unknown the DNS query is not tried again
- Reorder mutexes in nsapi_dns_query_multiple_async()
- Created nsapi_dns_query_async_initiate_next() function to initiate the next
DNS query from the queue after delete of previous query
- Added dsn_timer_running variable to supervise DNS timer start/stop
- Changed cancel function to only mark query as deleted and moved deletion
to timer function. This allows to run socket close on DNS thread
- Added new nsapi error NSAPI_ERROR_TIMEOUT for DNS (and other) timeouts
Subtract 4 from the received packet length - the buffer contains the
CRC, which we shouldn't pass up.
Ensure we allocate receive buffers of a size corresponding to the
rounded-up size we tell the hardware - the hardware was overrunning the
allocation by a couple of bytes.
Cruz Monrreal
cyliangtw
Seppo Takalo
Steven Cooreman
Tero Jääskö
Martin Kojtal
jeromecoutant
Mika Leppänen
Kevin Bracey
Veijo Pesonen
Kari Haapalehto
Asif Rizwan
Mahesh Mahadevan