* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436
* Fix mesh connect semaphore not releasing causing blockage
* Add support of NSAPI_ICMP sockets in Nanostack
* STM32F1: add MCU_STM32F103xD support
* STM32F1: add MCU_STM32F103xG support
* test: Disable failing tests due to echo server
Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
* Check CAN DLC length value
* Fix default interface ID only being used partially
If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.
* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.
Signed-off-by: Yilin Sun <imi415@imi.moe>
* CAN: read only up to 8 bytes
If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.
This fixes https://github.com/ARMmbed/mbed-os/issues/15361
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
* STM32F303xC: add RAM_CCM in GCC linker script
* fix(drivers/emac): Remove incorrect RMII RX ER initialization
* fix(drivers/emac): Add missing SPDX indetifier to ST driver files
* fixed compiler inline issue
* Update Mbed version block
* removed HSE speed limitation for STM32G431RB
* Added HSE range validation for STM32g431xB
* added support for 4, 8 and 16MHz
* M487: Remove unused variable 'u32EscapeFrame'
Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings
* force FIFO IRQ for FDCan RX on H7
* Add hardware CRC support to STM32G4
* add support for Nucleo-H745ZI
* Update MAX32670 peripheral drivers with final ones that use by SDK
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32670 apply mbed required changes on peripheral drivers
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M467: Support CAN bus
1. Update BSP CANFD driver
2. Notes for implementation
(1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
(2) For Rx disabling multiple filter handles,
1) Map all filter handles to filter handle 0
2) Use Rx FIFO 0 for filter handle 0
(3) For Rx enabling multiple filter handles,
1) Use Rx FIFO 0 for filter handle 0
2) Use Rx FIFO 1 for filter handle through first invoking can_filter()
3) Use dedicated Rx Buffer for other filter handles
NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
(4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
(5) Support no CAN FD.
* Fix 'new[]' array freed with 'delete'
The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.
* Define default parameters of functions of derived class the same as the base class
The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.
* Avoid calling virtual functions from constructors and destructors
Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.
* Fix potentially overrunning write of sprintf
Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.
* Fix system_clock.c location
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
* Fix variable name
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
* Change storage-class of secret_buf to static
Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.
* fix compiling errors of FATFileSystem when exFAT was enabled
* Add OSPI support for STM32H7
* Nuvoton: Enable extending sampling time for ADC/EADC
For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.
---------
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>
* Start working on fixing doxygen warnings
* Upgrade doxyfile to Doxygen 1.9.1
* Clean up some unmatched groups and add some exclusions
* Fix docs for rtos::ThisThread not showing up
* Fix up KV store docs
* Fix incorrect @files, some more incorrect groups
* Fix lots of broken links
* Start fixing mbedtls groups
* Fix more mbedtls docs
* Fix remaining mbedtls files with missing or incorrect grouping
* Fix a huge amount of PSA docs errors
* Fix a few more mbedtls docs errors
* Fix __cplusplus not defined for docs, clean up call in callback typedef, fix some docs errors
* Fix some broken doc links in HAL headers
* Fix more PSA doc errors
* Fix some doxygen errors in networking code
* Fix lots of network related doc errors
* Try and fix some CI failures
* Use Doxygen Action instead of doxygen in Mbed container to get the right version
* Try removing docs check
* Add first part of doxygen action
* Add next part of doxygen action
* Fix yaml syntax error
* Add in license check fix
* Try using verbose scancode
* Fix some more docs issues, workaround scancode-toolkit#3179
* Clean up the LoRaRadio get_state() function on each implementation. Also fix some other compile and doc errors.
* Fix all remaining doxygen errors
* Fix escaping, for realsies this time
* Remove Doxygen unsupported config options, fix some more get_status() declarations
* Fix some UNITTESTS build errors
* Fix one more compile error
* Another unittest error
Add an option to enable the greentea tests independently from the unit
tests.
We can't just use the typical BUILD_TESTING option to enable greentea
tests. BUILD_TESTING enables unit tests and fetches googletest, which
are compiled for the host. Greentea tests are cross compiled and require
a toolchain file. For this reason we add a new option just to enable
greentea tests, preventing build failures triggered by the unit tests
and googletest.
Assumption that greentea test file is always named main.cpp is
incorrect. Updated mbed_greentea_add_test() macro to make TEST_SOURCES
parameter compulsory, which is used to specify greentea test
file(s). This allows tests to use C, or have a different name.
Therefore also updated all pre-existing greentea test CMake files to
explicity add main.cpp to TEST_SOURCES.
- LittleFileSystem.h and LittleFileSystem.cpp refers to the littflefs headers with the complete path like storage/filesystem/littlefs/littlefs/lfs_util.h and fixed the path issue
f_mount() is doing both initializing (via find_volume() -> disk_initialize() where disk_initialize api calls Mbed OS init() function)
underlying block device and register filesystem but in case of "unmount" calls this f_mount is doing deregister filesystem
and missed to a deinitializing block device. So added the Mbed OS "deint()" call in unmount API to deinitialize block device
as f_mount API doesn't have a way to call deinit().
Aside from the core mbed-os CMake target, a number of targets have been created so they can optionally be included by application executables that require them using `target_link_libraries()`.
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: Rajkumar Kanagaraj <rajkumar.kanagaraj@arm.com>
Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Jamie Smith
Jay Sridharan
Jamie Smith
Andreas Reichle
Robert Walton
Martin Kojtal
ndrs-pst
Lingkai Dong
Hari Limaye
Rajkumar Kanagaraj
plan-do-break-fix
Hugues Kamba
Harrison Mutai
Hugues Kamba