* Fix null pointer dereferencing
Add null check for return values of functions that are mostly (but not
always) checked for null.
E.g., since 98% of calls to protocol_stack_interface_info_get_by_id
check for null, it is likely that the function can return null values in
some cases, and omitting the check could crash the program.
* Update MAX32660 peripheral drivers with final ones that use by SDK
* Apply MAX32660 delta
Update mbed hal function as per of SDK update
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M2354: Fix debug failure in Mbed Studio
In Mbed Studio, debugging, based on pyOCD, requires Mbed OS application code starting on the sector boundary.
Modification list:
1. Update TF-M import assets with MCUboot header padding to sector aligned
2. Following above, change header size argument (-H) in wrapper.py command line
3. Following below, fix min-write-size (--align) to 4 (per flash_area_align()) in wrapper.py command line
https://docs.mcuboot.com/design.html#image-trailer
Related issue:
https://github.com/ARMmbed/mbed-os/issues/15417
* Do not clear interrupt flag during initialization
This causes issue for repeaded initialization while using BufferedSerial mode
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32660, MAX32670 UART performance improvement
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* Handle negative values passed to close()
Calling close() with negative numbers causes out-of-bounds indexing of the filehandles array. For example, this can happen if open() returns an error and the value is later passed to close().
* Moved a { to the same line as if
Moved a { to the same line as if
* add nullpointer check in LWIP::socket_close
* Fix crash when using FDCAN3 RX IRQ on STM32G473 (and others)
* connectivity: drivers: Update Nuvoton M467 EMAC DMA_IE ctl
In IRQ Handler, to disable some interrupt type of DMA error.
It could avoid unexpected repeated interrupt.The masked bit of
DMA_IE could be recovered in next EMAC IRQ event.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
* Add workaround for G474 hardfault
* update drivers STM32WL CUBE V1.3.0
* Changed static to weak
* Fix: Do not disable SPI for manual drive mode during transaction setup
It has been reported that disabling SPI module causes glitch for manual SS drive mode
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* make cellular event queue size configurable
update unit tests
---------
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Ahmet Polat <Ahmet.Polat@maximintegrated.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: alrvid <126816223+alrvid@users.noreply.github.com>
Co-authored-by: Jost, Chris <79271064+chrJost@users.noreply.github.com>
Co-authored-by: Joseph Duchesne <joseph@avidbots.com>
Co-authored-by: cyliang tw <cyliang@nuvoton.com>
Co-authored-by: Maxim Markin <mak22223@ya.ru>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Lukas Karel <lukas.karel@world-direct.at>
* fix STM32L1 FLASH_SIZE for cat.3 devices with DEV_ID 0x436
* Fix mesh connect semaphore not releasing causing blockage
* Add support of NSAPI_ICMP sockets in Nanostack
* STM32F1: add MCU_STM32F103xD support
* STM32F1: add MCU_STM32F103xG support
* test: Disable failing tests due to echo server
Some tests are failing as echo.mbedcloudtesting.com is not serving TLS
requests anymore.
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
* Check CAN DLC length value
* Fix default interface ID only being used partially
If user sets the default interface ID for a socket (e.g. using setsockopt
with SOCKET_INTERFACE_SELECT), the default interface should take over
other interface selection mechanisms as a interface is bound to the socket.
This applies for both IPv6 local and global scopes for unicast messages
but not for multicast messages as these are bound to a multicast interface
using SOCKET_IPV6_MULTICAST_IF socket option.
* Targets: NXP: IMXRT: Fixed GCC_ARM lds syntax.
Signed-off-by: Yilin Sun <imi415@imi.moe>
* CAN: read only up to 8 bytes
If HAL implementation writes more than 8 bytes of data, error immediately.
CANMessage defines only 8 bytes of data, lenght cannot be > 8.
This fixes https://github.com/ARMmbed/mbed-os/issues/15361
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
* STM32F303xC: add RAM_CCM in GCC linker script
* fix(drivers/emac): Remove incorrect RMII RX ER initialization
* fix(drivers/emac): Add missing SPDX indetifier to ST driver files
* fixed compiler inline issue
* Update Mbed version block
* removed HSE speed limitation for STM32G431RB
* Added HSE range validation for STM32g431xB
* added support for 4, 8 and 16MHz
* M487: Remove unused variable 'u32EscapeFrame'
Remove unused variable 'u32EscapeFrame' in BSP m480_ccap.h to avoid warnings
* force FIFO IRQ for FDCan RX on H7
* Add hardware CRC support to STM32G4
* add support for Nucleo-H745ZI
* Update MAX32670 peripheral drivers with final ones that use by SDK
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* MAX32670 apply mbed required changes on peripheral drivers
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
* M467: Support CAN bus
1. Update BSP CANFD driver
2. Notes for implementation
(1) Each CANFD instance supports two IRQ lines. Use only line 0. Line 1 is not used.
(2) For Rx disabling multiple filter handles,
1) Map all filter handles to filter handle 0
2) Use Rx FIFO 0 for filter handle 0
(3) For Rx enabling multiple filter handles,
1) Use Rx FIFO 0 for filter handle 0
2) Use Rx FIFO 1 for filter handle through first invoking can_filter()
3) Use dedicated Rx Buffer for other filter handles
NOTE: H/W supports mask on Rx FIFO 0/1 but not on dedicated Rx Buffer.
(4) For Tx, use only dedicated Tx Buffer. BSP CANFD driver doesn't support Tx FIFO/Queue.
(5) Support no CAN FD.
* Fix 'new[]' array freed with 'delete'
The array _scratch_buf is allocated using new[] in line 761 of
mbed-os/storage/kvstore/securestore/source/SecureStore.cpp.
But it was freed using delete.
* Define default parameters of functions of derived class the same as the base class
The member function bringup() of class ThreadInterface redefines
parameter stack's default value to IPV6_STACK from the inherited default value
DEFAULT_STACK (in Interface).
The default value will be resolved statically, not by dispatch, so this
can cause confusion.
Similar arguments apply to LoWPANNDInterface and WisunInterface.
* Avoid calling virtual functions from constructors and destructors
Virtual functions are resolved statically (not dynamically) in
constructors and destructors for the same class. The call should be made
explicitly static by qualifying it using the scope resolution operator.
* Fix potentially overrunning write of sprintf
Format string "%d" requires 12 bytes (including the null terminator).
Also, use snprintf instead of sprintf to prevent buffer overflow.
* Fix system_clock.c location
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
* Fix variable name
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
* Change storage-class of secret_buf to static
Storing the address of a local variable (`secret_buf`)
in non-local memory (`prf_ptr->secret`) can cause a
dangling pointer bug if the address is used after the function returns.
* fix compiling errors of FATFileSystem when exFAT was enabled
* Add OSPI support for STM32H7
* Nuvoton: Enable extending sampling time for ADC/EADC
For all Nuvoton targets, enable extending sampling time in ADC/EADC clocks on per-pin basis.
---------
Signed-off-by: Saheer Babu <saheer.babu@arm.com>
Signed-off-by: Yilin Sun <imi415@imi.moe>
Signed-off-by: Martin Kojtal <martin.kojtal@arm.com>
Signed-off-by: Sadik.Ozer <sadik.ozer@analog.com>
Signed-off-by: Jasper Jonker <jasper.jonker@wingtra.com>
Signed-off-by: Jasper <jasper.jonker@wingtra.com>
Co-authored-by: caodd <caodd1993@qq.com>
Co-authored-by: YannCharbon <yann.charbon@ik.me>
Co-authored-by: Jerome Coutant <jerome.coutant@st.com>
Co-authored-by: Saheer Babu <saheer.babu@arm.com>
Co-authored-by: Martyx00 <martin.petran@protonmail.com>
Co-authored-by: Yilin Sun <imi415@imi.moe>
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: akiroz <akiroz.vectis@gmail.com>
Co-authored-by: Charles <hallard04@free.fr>
Co-authored-by: Leonard Chiang <leochiang2002@gmail.com>
Co-authored-by: Chun-Chieh Li <ccli8@nuvoton.com>
Co-authored-by: jmcloud <jmcloud@tesla.com>
Co-authored-by: Augusto Zanellato <augusto.zanellato@gmail.com>
Co-authored-by: Sadik.Ozer <sadik.ozer@analog.com>
Co-authored-by: Mingjie Shen <shen497@purdue.edu>
Co-authored-by: Jasper Jonker <jasper.jonker@wingtra.com>
Co-authored-by: wdx04 <wdx04@outlook.com>
Previously WisunBorderRouter start() used NetworkInterface type for mesh interface, although only
WisunInterface type is possible for the call. Added a new overloads of the start with the
WisunInterface as mesh interface type and deprecated the old ones. This makes the calls stricter
about the interface type and safer. It also allows to remove the reinterpret_cast that causes
compiler warning on ARM compiler.
Corrected Wi-SUN certificate add and remove functions to work properly
with .json certificates. .json certificates are used only if certificates
added by add functions are not set. Corrected certificate add and remove
functions to work properly and improved function descriptions.
Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Scancode found missing license notices in our source files. This commit
addresses those issues by adding an Apache-2.0 notice to source files
highlighted.
Added support for external RADIUS server configuration to Wi-SUN Border Router.
Added configuration functions and .json configuration options for:
- external RADIUS server IPv6 address
- RADIUS shared secret.
- RADIUS client retry trickle timer configuration. This can be used to set how fast
the RADIUS client retries Access-Request messages to RADIUS server in case reply
from server is not received.
```
connectivity
├── netsocket
├── lwipstack
├── nanostack
│ ├── mbed_lib.json // nanostack-interface's mbed_lib.json
│ ├── include
│ │ └── nanostack // headers from features/netsocket/nanostack-interface
│ ├── source // sources from features/netsocket/nanostack-interface
│ ├── coap-service // used by Thread only - deprecate?
│ ├── mbed-mesh-api
│ ├── nanostack-hal-mbed-cmsis-rtos // HAL porting layer for Nanostack on mbed with CMSIS-RTOS
│ ├── sal-stack-nanostack
│ └── sal-stack-nanostack-eventloop
├── cellular // previously in features/cellular/framework/
├── ...
```
This PR is a part of a wider \connectivity refactoring and implements the above new directory structure for \nanostack.
Jamie Smith
Tymoteusz Bloch
Arto Kinnunen
Anna Bridge
Debdeep Saha
Jarkko Paso
Martin Kojtal
Debdeep Saha
Mika Leppänen
Harrison Mutai
fred.li
Ashok Rao