7db3a8a34a
Tests: USB: DTR fix for Linux hosts
...
A DTR line is used to signal that the host has configured a terminal and
is ready to transmit and receive data from the USB CDC/Serial device.
When this test suite is run with the use of a Linux host, a workaround has
to be used to overcome some platform specific DTR line behavior.
Every time the serial port file descriptor is opened, the DTR line is
asserted until the terminal attributes are set.
As a consequence, the device receives a premature DTR signal with a
duration of 200-500 us before the correct, long-lasting DTR signal set by
the host-side test script. (tested on the Linux kernel 4.15.0)
The solution is to wait for the first DTR spike, ignore it, and wait for
the correct DTR signal again.
2019-02-22 10:53:21 -06:00
a4a3b3d429
Remove USB disconnect delay from Serial test
...
Remove the USB disconnect delay since there is no reason this is
needed. Failures which occur without this indicate a device or host
problem.
2019-02-22 10:53:21 -06:00
930b29dd83
Tests: USB: Increase serial open retries
...
Double the number of attempts that are made to open a serial port.
This makes tests run more reliably on Windows.
2019-02-22 10:53:21 -06:00
96154b577a
Tests: USB: Remove TX_DELAY_MS from serial test
...
Remove TX_DELAY_MS and all the places it was called since it is not
needed when DTR flow control is used.
2019-02-22 10:53:21 -06:00
8f72f314d7
Tests: USB: Use DTR to make Serial tests reliable
...
Update the serial host test to set DTR low before opening a serial
port. Set DTR high once the serial object is ready. This ensures that
no data is sent by the device until the host is ready.
2019-02-22 10:53:21 -06:00
31fe3ee11e
Tests: USB: Increas the size of RX CDC test data
...
This ensures the flow control is tested.
2019-02-22 10:53:21 -06:00
53f7cd5561
Tests: USB: Fix Windows USB SN handling
2019-02-22 10:53:21 -06:00
3d4d10191c
Tests: USB: Update code comments
2019-02-22 10:53:21 -06:00
edf360d2fc
Tests: USB: Use SN generated by the host machine
2019-02-22 10:53:21 -06:00
fc366291a2
Tests: USB: Correct reconnect delay
...
Setting to 1 ms to be on the safe side. The USB spec defines this delay
to be at least 200 us.
2019-02-22 10:53:21 -06:00
2d4d111445
Tests: USB: Wait before transmitting data to host
...
Despite having ECHO and ECHOCTL POSIX lflags disabled by default by
pyserial, a delay is needed for host to properly handle data received
from USB serial/CDC device.
With no delay host would echo 0x00-0x31 characters prefixed with '^'.
2019-02-22 10:53:20 -06:00
dbfd43a098
Tests: USB: Wait before closing host's port
...
This delay eliminates the possibility of the device detecting the port
being closed when still waiting for data.
2019-02-22 10:53:20 -06:00
7b80cb6586
Tests: USB: Add Serial test for line coding change
2019-02-22 10:53:20 -06:00
bf3aa29e0b
Tests: USB: Use the serial number to find device
...
Use the USB device SN instead of VID & PID to find the device port name
on the host system.
2019-02-22 10:53:20 -06:00
07ffcb4269
Tests: USB: Fix USB reconnect tests for Win hosts
2019-02-22 10:53:20 -06:00
7a4b36c37f
Tests: USB: Add tests for Serial class.
2019-02-22 10:53:20 -06:00
3ed7d8139b
Tests: USB: Add tests for CDC class.
2019-02-22 10:53:20 -06:00
cb6a6dbd20
Fix USB traceback during testing when wrong size
...
In the pyusb_basic host test check the length of control transfers
before comparing contents for equality.
2019-02-22 10:53:20 -06:00
1f8bf46f2e
Tests: USB: Check ep buffer is released by abort
...
Validate that endpoint buffer is not used after a transfer has been
aborted.
2019-02-22 10:53:20 -06:00
36d4c355a9
Tests: USB: Update endpoint halt test
...
Wait for a locally created Timer thread to finish before returning.
2019-02-22 10:53:19 -06:00
c677bf7426
Tests: USB: Decrease the max data size for iso ep
...
Although the USB spec sets the upper limit on FS isochronous endpoint
payloads to 1023 B, this value is hard to test in practice. Moreover,
not all the targets Mbed OS supports (like NUCLEO_F207ZG) are able to
handle all the endpoints set to max.
2019-02-22 10:53:19 -06:00
7563a0f03f
Update test to restart reads after unstall
...
After an endpoint is unstalled any pending transfers are terminated.
This patch re-starts any reads that were ongoing.
2019-02-22 10:53:19 -06:00
27bd1656b1
Tests: USB: Update ep callbacks
...
Endpoint callbacks no longer have endpoint as a param. This update was
introduced in #7267 .
2019-02-22 10:53:19 -06:00
c12e2d15f5
Tests: USB: Add data toggle test
2019-02-22 10:53:19 -06:00
ff8a9b6ae8
Tests: USB: Update endpoint tests
...
Fix the host script issues present on Windows machines.
Add 0 B payload size to bulk endpoints test.
Update halt and abort tests according to PR comments.
Add an explicit request to start reading on OUT endpoints.
2019-02-22 10:53:19 -06:00
62dc95f60a
Tests: USB: Generic: Update documentation
2019-02-22 10:53:19 -06:00
686126b8ea
Tests: USB: Generic: Add basic endpoint tests
2019-02-22 10:53:19 -06:00
79376c6f00
Tests: USB: Add device config files for Zadig
...
Zadig is a tool used to install generic USB drivers on Windows machines.
These drivers are necessary to run USB device test suite on Windows
hosts.
2019-02-22 10:53:18 -06:00
799cde0fc3
Remove endpoint parameter from USB callbacks
...
Remove the endpoint parameter from endpoint callbacks. This
information is redundant because endpoints are known at
construction time because they must be in the configuration
descriptor.
2019-02-22 10:53:18 -06:00
793044eb26
Fix various USB warnings
...
Fix the following warnings:
-[Warning] USBTester.cpp@45,0: #1299-D: members and base-classes will
be initialized in declaration order, not in member initialisation
list order
-[Warning] USBTester.h@41,0: #1300-D: ~USBTester inherits implicit
virtual
-[Warning] USBAudio.cpp@345,0: #1035-D: single-precision operand
implicitly converted to double-precision
-[Warning] USBHID.cpp@29,0: #1300-D: ~AsyncSend inherits implicit
virtual
-[Warning] USBHID.cpp@61,0: #1300-D: ~AsyncRead inherits implicit
virtual
-[Warning] USBHID.cpp@93,0: #1300-D: ~AsyncWait inherits implicit
virtual
-[Warning] EndpointResolver.cpp@125,26: '<<' in boolean context, did
you mean '<' ? [-Wint-in-bool-context]
2019-02-22 10:53:17 -06:00
d66e576227
USB basic test documentation update
2019-02-22 10:53:15 -06:00
fee14771e9
USB basic test update
...
disable suspend/resume test
disable sync frame test
improve reset test
2019-02-22 10:53:15 -06:00
bcfe96b83c
Update usb test to connect and block itself
...
Update the basic usb test so it does blocking itself since blocking
connect was removed from USBDevice.
2019-02-22 10:53:15 -06:00
9f94a5fc56
Fix typo in USBTester.h
...
Fix the spelling of product_release.
2019-02-22 10:53:15 -06:00
12c91c3b7e
pyusb_basic test update
...
test code refactoring
align test to use device multiconfiguration
2019-02-22 10:53:14 -06:00
e85d5a33cd
pyusb_basic test add helper functions
2019-02-22 10:53:14 -06:00
972fee6143
pyusb_basic test formatting fixes
2019-02-22 10:53:14 -06:00
9b4970342b
Extend USB test class configuration
2019-02-22 10:53:14 -06:00
6bb6d6fb42
Explicitly specify USBPhy used for testing
...
Add a parameter to the USBPhy class so mock or wrapper USBPhy classes
can be used.
2019-02-22 10:53:14 -06:00
a341a7c258
Make USB disconnect + connect time explicit
...
Create the define MIN_DISCONNECT_TIME_US to be used as the amount of
time that must pass between connect and disconnect for the host to
reliably detect reconnection. Replace the wait calls delaying for this
value to wait_us to indicate the precision required. Finally, remove
the unnecessary calls to wait_ms in
repeated_construction_destruction_test.
2019-02-22 10:53:14 -06:00
ff3b0c1623
code formatting fixes
2019-02-22 10:53:13 -06:00
69a095cf3e
USBDevice - add multiconfiguration support
2019-02-22 10:53:13 -06:00
c2c3e01c36
USBDevice - add support for deconfiguration
2019-02-22 10:53:13 -06:00
e4ffc6dea0
USB reset test fix
2019-02-22 10:53:13 -06:00
50adb03f88
Fix USB tests
...
Change the direction used in set interface to match the USB
specification. This allows USB tests to pass on OSX.
2019-02-22 10:53:13 -06:00
0a787e7fe9
Skip USB reset tests on OSX
...
OSX machines don't allow you to reset USB devices. Skip this test on
OSX so testing can still be used.
2019-02-22 10:53:13 -06:00
49504d66ca
Fix for USB set_clear_feature_test for OSX
2019-02-22 10:53:13 -06:00
f31eb68ec5
Update USBTester product name
...
Change the name reported by USBTester from CDC DEVICE to
MBED TEST DEVICE.
2019-02-22 10:53:12 -06:00
33bef331e6
USB generic tests
2019-02-22 10:52:35 -06:00
aedeee068a
Update USBTester for the new USB API
...
Update the class USBTester so it works with the new zero-copy
USBDevice API.
2019-02-22 10:52:34 -06:00
de12bb57fa
Update USBTester for simplified read handling
...
Remove read_start and replace read_finish with read to match the new
USBDevice API.
2019-02-22 10:52:33 -06:00
f9f12766d8
Add USBDevice test code
...
Add a USB test and the class USBTester.cpp to go along with it.
2019-02-22 10:52:32 -06:00
19c6732105
Add missing wifi parameters to test configs
2019-02-22 10:13:14 +02:00
49aae7b43e
Update secure binaries
2019-02-22 02:04:00 +02:00
870bd05904
Merge pull request #9708 from davidsaada/david_protected_storage
...
Implement PSA protected storage & restructure PSA storage implementation
2019-02-21 17:30:56 -06:00
41eb5cbfd9
Implement PSA protected storage & restructure PSA storage implementation
...
- Move all PSA storage code under psa/storage directory
- Create a global PSA error codes header, eliminating ITS specific ones
- Create a common header file for PSA storage type definitions,
eliminating ITS specific ones
- Create a common implementation for PS & ITS
- Implement protected storage feature
- Change ITS test to be common to PS as well
2019-02-21 20:58:59 +02:00
b0a33273ff
Correctly include EventQueue.h
...
There are two EventQueue.h in mbed-os codebase:
events/EventQueue.h
features/FEATURE_BLE/ble/pal/EventQueue.h
By accident, `mbed compile` generates includes.txt with the correct
order of include search paths. This is not the case for the CMake
exporter: targets with FEATURE_BLE enables fail to compile with errors:
mbed-os/features/cellular/framework/AT/ATHandler.h:99:60: error:
'events' has not been declared
Update all places to always include either "events/EventQueue.h"
or "ble/pal/EventQueue.h": to always find the correct header.
2019-02-21 17:59:05 +02:00
dbd92c746b
Merge pull request #9387 from tymoteuszblochmobica/Sockets
...
Multihoming initial release
2019-02-21 13:50:03 +01:00
641189c357
Multihoming change parameter orded in gethostbyname
2019-02-20 14:37:33 +02:00
dfab4de4cf
crypto: test: Use new PSA error codes
...
The PSA Framework and PSA Crypto error code names have been unified and
renamed in some cases. Use the new unified names.
2019-02-20 11:31:30 +02:00
7f4475d924
Merge pull request #9736 from 0xc0170/fix_licenses_files
...
tools/test/cmsis: add license header
2019-02-20 09:38:55 +01:00
b59b8170a6
Merge pull request #9698 from michalpasztamobica/netsocket_documentation_cleanup
...
Netsocket documentation cleanup
2019-02-19 15:34:26 -06:00
4c04771c5d
Merge pull request #9653 from kfnta/tfm_src_integ
...
TF-M sources integration to Mbed-OS
2019-02-19 15:28:44 -06:00
feae56eea1
Merge pull request #9493 from RonEld/add_platform_initialization_in_trng_test
...
Initialize platform in trng test
2019-02-19 15:27:40 -06:00
4cbcc36c3c
Merge pull request #9730 from michalpasztamobica/tlssocketsimultaneous_temporary_removal
...
Greentea: Remove TLSSocket_simultaneous test
2019-02-19 14:56:02 -06:00
00feb5313a
Update copyright years
2019-02-19 17:39:46 +02:00
49141376ee
Multihoming initial release
...
Added Multihoming feature to LWIP (ability to use more than one network interfaces) for increasing networking reliability.
This involves:
LWIP interface
LWIP IP routing
DNS storage
Sockets (bind to interface name possibility)
possibility to add non default network interface
cellular middleware modifications if cellular connection is used
2019-02-19 17:39:46 +02:00
60c6740c88
Build SPM tests only for MBED_SPM targets
2019-02-19 15:19:05 +02:00
31da50e8fa
Merge pull request #9718 from michalpasztamobica/greentea_tcpsocket_suite_timeout
...
Greentea tests: user-configurable timeouts
2019-02-18 14:15:39 +01:00
22bf92bb7e
Initialize platform in trng test
...
Add calls to `mbedtls_platform_setup()` and
`mbedtls_platform_terminate()` to the trng greentea test, to
initialize the hardware acceleration engines, in some platforms.
2019-02-18 11:43:32 +02:00
5eaf08e899
Netsocket documentation cleanup
2019-02-18 10:40:42 +02:00
c08f51aa36
copyright 2019 fix
2019-02-15 13:37:40 +00:00
ca57bdd481
Greentea tests: user-configurable timeouts
...
Now it is enough to add:
"macros": [
"MBED_GREENTEA_TEST_XXXSOCKET_TIMEOUT_S=20"
],
to mbed_app.json, where XXX is on of {DNS, TLS, UDP, TCP}.
Also network-* tests are now configurable: network-interface, network-wifi, network-emac with a similar macro.
2019-02-15 15:08:15 +02:00
a089661f05
Greentea: Remove TLSSocket_simultaneous test
...
The reason is that some platforms lack memory to run it. To be brought
back once TLS library memory consumption is optimized.
2019-02-15 11:59:28 +02:00
92ed1cb10c
Add flash sum check
...
Check that flash size sum up to all sectors combined
2019-02-14 17:30:51 +02:00
17878e3ce8
test mbedmicro: fix licenses
2019-02-14 14:02:35 +00:00
852f667d05
wifi test: add license info
2019-02-14 13:58:07 +00:00
f2abdcbcc6
Merge pull request #9639 from michalpasztamobica/esp8266_connect_timeout
...
ESP8266: connect() checks errors from ESP chip
2019-02-13 20:00:37 -06:00
da5719113c
Merge pull request #9701 from kfnta/entorpy_inject_test_refactor
...
Refactor psa entropy inject test
2019-02-13 17:28:53 -06:00
2e9d6d2938
Merge pull request #9645 from AriParkkila/cellular-netsocket
...
Change TESTS/netsocket/ for cellular testing
2019-02-13 17:28:35 -06:00
704a1cb6c8
Merge pull request #9702 from kfnta/psa_fix_partition_dpendecies
...
Fix dependencies of platform partition
2019-02-13 17:11:06 -06:00
1b233c5d5e
Merge pull request #9686 from michalpasztamobica/tlssocket_invalid_handshake_port_fix
...
Greentea tests: set correct port to test against google.com
2019-02-13 17:10:48 -06:00
45c44eb07c
Fix dependencies of platform partition
2019-02-13 17:10:12 +02:00
eb48d3cbeb
Clear ITS environment in psa entropy tests
...
mbed_psa_reboot_and_request_new_security_state() API replaced its_reset() which is now a secure API only
This change is necessary for a clean environment for the test
2019-02-13 14:21:17 +02:00
6bb0894c47
Refactor psa entropy inject test
...
Replace TEST_ASSERT with more specific assertions
2019-02-13 14:20:55 +02:00
56badd8616
Change TESTS/netsocket/ for cellular testing
2019-02-13 01:30:42 -08:00
3e6cd4e89d
Merge pull request #9501 from caixue1102/mbed-os-rda
...
Add WIFI support for RDA target UNO_91H
2019-02-12 20:05:27 -06:00
d92e33dcee
Add WIFI support for RDA target UNO_91H
2019-02-12 22:59:53 +08:00
b5c00aa6b7
Greentea tests: set correct port to test against google.com
2019-02-12 15:40:11 +02:00
091509705f
Merge pull request #9570 from VeijoPesonen/bugfix-tests-netsocket-udp_udpsocket_echotest_nonblock
...
tests-netsocket-udp: UDPSOCKET_ECHOTEST_NONBLOCK fixes
2019-02-12 09:55:20 +01:00
799476dd55
Merge pull request #9630 from michalpasztamobica/publish_documentation
...
Publish tests documentation for DNS, Emac, NetworkInterface and Wifi
2019-02-11 18:47:55 -06:00
5c4d5e346d
Merge pull request #9582 from michalpasztamobica/greentea_socket_improvements
...
Greentea Socket test improvements
2019-02-11 18:45:38 -06:00
8f932a476f
Merge pull request #9449 from c1728p9/pinmap-extension
...
Pinmap extensions
2019-02-11 18:24:19 +01:00
6a184da381
ESP8266: connect() can handle ESP's errors.
...
ESP8266Interface::connect() checks the exact return value from
the underlying ESP8266::connect() call.
Increased timeout for network-wifi greentea tests to 6 minutes.
2019-02-11 17:20:14 +02:00
d5892ce312
Add a sanity check test for pinmaps
...
Add a test which sanity checks all pinmaps.
2019-02-08 09:10:50 -06:00
ae20556635
Edit README.md
...
Edit file, mostly for inclusion of articles.
2019-02-07 16:10:38 -06:00
e9c44a86ac
Edit README.md
...
Edit file, mostly for inclusion of articles.
2019-02-07 15:52:20 -06:00
629e8a0e05
Edit README.md
...
Edit file, mostly for inclusion of articles and complete sentences.
2019-02-07 15:45:08 -06:00
099cbb1d30
tests-network-interface: drops unreferenced variable
2019-02-07 12:04:09 +02:00
ba75924c28
tests-netsocket-tls: TLSSOCKET_ECHOTEST deletes socket on failure case
2019-02-07 12:01:09 +02:00
ea3d70e0b1
Publish tests documentation for DNS, Emac, NetworkInterface and Wifi
...
Documentation moved from internal Confluence pages.
2019-02-06 16:22:21 +02:00
dcba5ffa3c
Merge pull request #9529 from kfnta/its_crypto
...
RollUp PR Crypto with ITS
2019-02-04 17:14:05 +01:00
df3cdaa983
tests-netsocket-udp: UDPSOCKET_ECHOTEST_NONBLOCK execution time limit
...
Test case is allowed to take not more than a half what has been given
to the whole UDP suite.
UDP test cases reorganized so that the longest running ones are
executed last.
2019-02-04 12:33:34 +02:00
b3fd8a9bef
Greentea DNS test: added debug print
2019-02-01 15:34:38 +02:00
99fc26ecdf
Greentea Socket bind tests made ipv6-aware
2019-02-01 15:34:07 +02:00
fba66cf7f3
Greentea UDPSOCKET_RECV_TIMEOUT increase time tolerance
2019-02-01 14:22:05 +02:00
3d4582bda0
Merge pull request #9572 from michalpasztamobica/greentea_tls_ipv6_compliant_website
...
Use an ip4- and ip6-compliant site to test TLS certificate error reporting
2019-02-01 08:26:08 +01:00
3f92beb08b
Update FUTURE_SEQUANA_PSA secure binaries
2019-01-31 19:31:53 +02:00
2c5d246249
Merge pull request #9429 from SeppoTakalo/TCPSOCKET_endpoint_close
...
Fix TCPSOCKET_ENDPOINT_CLOSE: Cannot accept WOULD_BLOCK
2019-01-31 10:20:20 -06:00
ea9f104463
Fix Licenses
2019-01-31 17:17:58 +02:00
f5e4f69c02
Update FUTURE_SEQUANA_PSA secure_binaries
2019-01-31 17:17:56 +02:00
47365d4620
Update ITS test
2019-01-31 17:17:56 +02:00
3d3ee3834d
Update tests to use new APIs
2019-01-31 17:17:56 +02:00
51b76350d9
Remove ITS Reset partitions from tests
2019-01-31 17:17:55 +02:00
0de098e149
Add FUTURE_SEQUANA prebuilt binaries
2019-01-31 17:17:55 +02:00
156d3b785b
Replace psa_prot_internal_storage.h with psa/internal_trusted_storage.h
2019-01-31 17:17:54 +02:00
d2025b7150
Tests
2019-01-31 17:17:54 +02:00
34895a05ad
CR fixes
2019-01-31 17:17:54 +02:00
8841ba69f8
Align to new spec changes and prep for TFM SPM
...
# Conflicts:
# components/TARGET_PSA/services/crypto/COMPONENT_PSA_SRV_IPC/psa_crypto_spm.c
# components/TARGET_PSA/services/crypto/COMPONENT_SPE/psa_crypto_partition.c
2019-01-31 17:17:53 +02:00
c3f3dcbc0e
Use an ip4- and ip6-compliant site to test TLS certificate error reporting
2019-01-31 15:00:13 +02:00
4d31455a0f
tests-netsocket-udp: UDPSOCKET_ECHOTEST_NONBLOCK restores non-blocking
...
Fixes a bug where after dropping bad packets receiver doesn't restore
the socket back to non-blocking state as it's supposed to.
2019-01-31 12:59:40 +02:00
a4ed473afc
Merge pull request #9515 from VeijoPesonen/bugfix-tests-netsocket-udp_udpsocket_sendto_invalid
...
tests-netsocket-udp UDPSOCKET_SENDTO_INVALID allow unsupported empty UDP packet
2019-01-30 10:08:34 +01:00
7d036b52cd
Merge pull request #9283 from michalpasztamobica/tlssocket_greentea
...
Add TLSSocket greentea tests.
2019-01-30 09:55:21 +01:00
fa46e3b499
crypto: Add test of hash clone
...
Test hash clone by adding a test to TESTS/mbed-crypto/sanity/main.cpp
2019-01-29 11:43:27 +02:00
e66b2203a9
crypto: Add test of key handles
...
Test key handles by adding a test to TESTS/mbed-crypto/sanity/main.cpp
2019-01-29 11:43:26 +02:00
f882a07708
crypto: Update tests to use key handles
...
Update tests in TESTS/mbed-crypto/sanity/main.cpp
2019-01-29 11:43:26 +02:00
b0fca1ffc8
Test UDPSOCKET_SENDTO_INVALID allows NSAPI_ERROR_UNSUPPORTED
2019-01-29 10:59:06 +02:00
af65522652
Publish TLSSocket test documentation
...
The whole README.md had to be updated to match the internal Confluence documentation, which can now be locked. In the process I also updated any spotted mistakes in tests documentation, removed the obsolete TCPServer tests documentation and added a test which was missing from UDPSocket's main.
2019-01-23 16:54:19 +02:00
815066f853
Add debug prints to triage the test timeouts
2019-01-22 16:40:02 -06:00
62d6eb5673
Increase the timeout for the host side script and the test
2019-01-22 16:04:47 -06:00
d568e2160b
Add TLSSocket greentea tests.
...
TLSSocket tests based on existing TCPSocket greentea tests and TLSSocket icetea tests.
2019-01-22 12:46:48 +01:00
a09b5f5c6b
Merge pull request #9416 from fkjagodzinski/test_update-systimer
...
RTOS: SysTimer: Fix test timing issues
2019-01-21 13:44:53 +01:00
7b29593a41
Merge pull request #9415 from SeppoTakalo/ONME-4140
...
Allow NSAPI_ERROR_UNSUPPORTED from Socket::setsockopt()
2019-01-21 13:43:37 +01:00
5c46faeb86
Merge pull request #9417 from jeromecoutant/PR_DNSTIMEOUT
...
Netsocket DNS test: increase timeout value
2019-01-21 13:42:24 +01:00
27cce81580
Merge pull request #9258 from jeromecoutant/PR_FLASHSKIP
...
FLASH test: skip test if test region overlaps code
2019-01-21 13:15:51 +01:00
6b92d32b3e
Fix TCPSOCKET_ENDPOINT_CLOSE: Cannot accept WOULD_BLOCK
...
This testcase uses Socket in blocking mode, and therefore
WOULD_BLOCK should not be accepted.
The logic was wrong anyway, because return value was tested
to be negative before testing with WOULD_BLOCK which is negative
as well.
Also replaced TEST_FAIL() macro with TEST_ASSERT_EQUAL() to
make the return code visible in test log.
2019-01-21 10:46:11 +02:00
5840281682
ROTS: SysTimer: Fix test timing issues
...
Use a busy loop with non-blocking Semaphore::wait(0) calls instead of a
single Semaphore::wait(osWaitForever) to improve time measurement
accuracy. Looping in Semaphore::wait(0) prevents the board from entering
sleep or deepsleep modes while waiting for the semaphore. By skipping
the overhead wakeup time, we get more accurate timings.
2019-01-18 17:10:39 +01:00
68deb05d1b
Merge pull request #9376 from michalpasztamobica/tcpsocket_greentea
...
TCP/UDP greentea tests refactoring and cleanup
2019-01-17 21:52:40 -06:00
436d3d043d
Merge pull request #9257 from jeromecoutant/PR_FLASHIAP_TIMING
...
FLASHIAP test: skip test if test region overlaps code
2019-01-17 21:50:20 -06:00
3a190656fa
Netsocket DNS test: increase timeout value
2019-01-17 17:39:43 +01:00
26dcd0d90a
Allow NSAPI_ERROR_UNSUPPORTED from Socket::setsockopt()
2019-01-17 18:02:04 +02:00
6e629e1ba6
Gemalto Crinterion UDP test adjustments
...
Adjusting the tests to match the cellular modems ELS61-E2 and BGS2-W requirements.
2019-01-15 12:38:48 +01:00
59e8dedb67
TCP/UDP greentea tests refactoring and cleanup
2019-01-15 10:00:35 +01:00
435d944dd0
fix its_reset test
2019-01-13 18:30:22 +02:00
ef681bf18d
Add SPDX-License-Identifier and Copyright in new files
2019-01-08 15:32:08 +01:00
01ca8443a8
Add stack size unification test
...
Test checks stack sizes:
- ISR stack: exactly 1KB (with exception for NORDIC - 2KB and RENESAS - Cortex A targets not supported for this test)
- Main thread stack: exactly 4KB (with some exceptions - 3KB)
- Thread stack: exactly 4KB
2019-01-08 15:32:01 +01:00
482396ce7d
FLASH test: skip test if test region overlaps code
2019-01-04 16:50:54 +01:00
b712e71194
FLASHIAP test: skip test if test region overlaps code
2019-01-04 16:38:32 +01:00
acd69ae7e1
Merge pull request #9229 from maciejbocianski/qspi_hal_test_k82f_fix
...
hal-qspi_test: move frequency setting before flash init
2019-01-04 08:56:54 +00:00
5625b6964d
Fix Python 3 syntax in rtc host test
2019-01-03 12:04:36 -06:00
Filip Jagodzinski
Russ Butler
Filip Jagodzinski
Maciej Bocianski
Michal Paszta
Oren Cohen
Cruz Monrreal
David Saada
Volodymyr Medvid
Martin Kojtal
Tymoteusz Bloch
Jaeden Amero
Seppo Takalo
Tymoteusz Bloch
Michael Schwarcz
Ron Eldor
Amir Cohen
Oren Cohen
Ari Parkkila
Cai
Amanda Butler
Veijo Pesonen
Alexander Zilberkant
itayzafrir
Senthil Ramakrishnan
jeromecoutant
Przemyslaw Stekiel
Brian Daniels