targets/targets.json already added MCU_LPC11U35_501 as an extra label
but it didn't have LPC11U35_501 (without the MCU_ prefix). Both of
these target names are used as folder names to organize files
specific to this device. For example the LPC11U35.ld linker script used
by GCC_ARM for this target is located in a TARGET_LPC11U35_501 folder.
I switched to using inheritance to properly setup the target labels
based on @theotherjimmy comments on PR #4252. Everything in the
XADOW_M0 targe appears to have been copy/pasted from LPC11U35_501
anyway so inheritance seems to be the best way to set the values of
the XADOW_M0 properties.
failing on file allocation / opening during Stream creation.
The consequence was application continues running, but any printf
to the Serial object whose Stream was not properly created
would not show any error (and characters would not show either)
Let's add a check to properly inform user of the error.
Serial implementation uses different vector handlers for sync/async calls respectively. The issue can be reproduced with the following flow:
1. Register sync mode callback with Serial.attach().
2. Sync call with Serial.putc()/getc().
3. Change to async call with Serial.write()/read().
4. Change back to sync call with Serial.putc()/getc().
Now, vector handller is still for async mode, not for sync mode.
To fix it:
1. Introduce internal function serial_enable_interrupt() for both sync/async vector handler enable/disable.
Original HAL function serial_irq_set() is reduced to call it for sync mode vector handler enable/disable.
2. Introduce internal function serial_rollback_interrupt() to roll back sync mode vector handler at end of async transfer.
NXP LPC176x/5x User Manual UM10360 Rev 4.1:
32.3.2.8 RAM used by IAP command handler
Flash programming commands use the top 32 bytes of on-chip RAM. The maximum stack
usage in the user allocated stack space is 128 bytes and it grows downwards.
NXP LPC176x/5x User Manual UM10360 Rev 4.1:
32.3.2.8 RAM used by IAP command handler
Flash programming commands use the top 32 bytes of on-chip RAM. The maximum stack
usage in the user allocated stack space is 128 bytes and it grows downwards.
NXP LPC176x/5x User Manual UM10360 Rev 4.1:
32.3.2.8 RAM used by IAP command handler
Flash programming commands use the top 32 bytes of on-chip RAM. The maximum stack
usage in the user allocated stack space is 128 bytes and it grows downwards.
NXP LPC176x/5x User Manual UM10360 Rev 4.1:
32.3.2.8 RAM used by IAP command handler
Flash programming commands use the top 32 bytes of on-chip RAM. The maximum stack
usage in the user allocated stack space is 128 bytes and it grows downwards.
NXP LPC176x/5x User Manual UM10360 Rev 4.1:
32.3.2.8 RAM used by IAP command handler
Flash programming commands use the top 32 bytes of on-chip RAM. The maximum stack
usage in the user allocated stack space is 128 bytes and it grows downwards.
NXP LPC176x/5x User Manual UM10360 Rev 4.1:
32.3.2.8 RAM used by IAP command handler
Flash programming commands use the top 32 bytes of on-chip RAM. The maximum stack
usage in the user allocated stack space is 128 bytes and it grows downwards.
When attempting to perform a test build of various mbed-os targets with
GCC configured to build -std=gnu++11, all of the targets built
successfully except for this one. It gave errors like this:
../mbed-os/targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/sdk/wifi_emac/wifi_emac_api.cpp: In function 'emac_interface_t* wifi_emac_get_interface()':
../mbed-os/targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/sdk/wifi_emac/wifi_emac_api.cpp:331:38: error: use of deleted function 'emac_interface::emac_interface()'
_intf = new emac_interface_t();
^
In file included from ../mbed-os/targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/sdk/wifi_emac/wifi_emac_api.cpp:9:0:
../mbed-os/hal/emac_api.h:150:16: note: 'emac_interface::emac_interface()' is implicitly deleted because the default definition would be ill-formed:
typedef struct emac_interface {
^
../mbed-os/hal/emac_api.h:150:16: error: uninitialized const member in 'struct emac_interface'
../mbed-os/hal/emac_api.h:151:32: note: 'const emac_interface_ops_t emac_interface::ops' should be initialized
const emac_interface_ops_t ops;
This commit contains a proposed change which fixes this issue by not
using the new operator to allocate the emac_interface_t structure but
instead using the malloc() function since the construction is being
handled explicitly in the subsequent lines of the
wifi_emac_get_interface() function anyway.
I also added code which only completes the initialization of the _intf
object if its allocation succeeds and just returns NULL otherwise.
I see no deallocation of the _intf object occurring so no change from
delete to free() needed to be made.
Revert HRM1017 file source deletion
Added in small comment next to additions
Added mapping to BTN-labelled switches
Added mapping to USER_BUTTON-labelled switches
Undo incorrect mapping to SWIO pin in NORDIC target
Jimmy Brisson
arostm
Kevin Gilbert
Sam Grove
Adam Green
Laurent MEUNIER
Alexis ROCHE
ccli8
0x6d61726b
Christopher Haster
Mihail Stoyanov
Andrzej Puzdrowski