Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
In Mbed OS 5.12.0 mbed_toolchain.py has been introduced, that automatically defines the macro TARGET_NAME (on line 241). This leads to a high number of generating the following warning: 'TARGET_NAME' macro redefined while compiling code for MAX32630FTHR on Mbed OS 5.12 and above. This patch fixes it, while it keeps the definition in place for lower versions that lack mbed_toolchain.py
Workaround a bug where the boot stack size configuration option is not
passed on to armlink, the Arm Compiler's linker. Prefer
MBED_CONF_TARGET_BOOT_STACK_SIZE if present, as this is what the
configuration system should provide. Fall back to MBED_BOOT_STACK_SIZE
if MBED_CONF_TARGET_BOOT_STACK_SIZE is not defined, as in the case of
buggy tools. If both MBED_CONF_TARGET_BOOT_STACK_SIZE and
MBED_BOOT_STACK_SIZE are not defined, then we fall back to a hard-coded
value provided by the linkerscript. See
https://github.com/ARMmbed/mbed-os/issues/13474 for more information.
To allow overriding of the boot stack size from the Mbed configuration
system, consistently use MBED_CONF_TARGET_BOOT_STACK_SIZE rather than
MBED_BOOT_STACK_SIZE.
Fixes#10319
ARM Compiler 6.13 testing revealed linker errors pointing out
conflicting use of `__user_setup_stackheap` and
`__user_initial_stackheap` in some targets. Remove the unwanted
`__user_initial_stackheap` from the targets - the setup is
centralised in the common platform code.
Looking into this, a number of other issues were highlighted
* Almost all targets had `__initial_sp` hardcoded in assembler,
rather than getting it from the scatter file. This was behind
issue #11313. Fix this generally.
* A few targets' `__initial_sp` values did not match the scatter
file layout, in some cases meaning they were overlapping heap
space. They now all use the area reserved in the scatter file.
If any problems are seen, then there is an error in the
scatter file.
* A number of targets were reserving unneeded space for heap and
stack in their startup assembler, on top of the space reserved in
the scatter file, so wasting a few K. A couple were using that
space for the stack, rather than the space in the scatter file.
To clarify expected behaviour:
* Each scatter file contains empty regions `ARM_LIB_HEAP` and
`ARM_LIB_STACK` to reserve space. `ARM_LIB_STACK` is sized
by the macro `MBED_BOOT_STACK_SIZE`, which is set by the tools.
`ARM_LIB_HEAP` is generally the space left over after static
RAM and stack.
* The address of the end of `ARM_LIB_STACK` is written into the
vector table and on reset the CPU sets MSP to that address.
* The common platform code in Mbed OS provides `__user_setup_stackheap`
for the ARM library. The ARM library calls this during startup, and
it calls `__mbed_user_setup_stackheap`.
* The default weak definition of `__mbed_user_setup_stackheap` does not
modify SP, so we remain on the boot stack, and the heap is set to
the region described by `ARM_LIB_HEAP`. If `ARM_LIB_HEAP` doesn't
exist, then the heap is the space from the end of the used data in
`RW_IRAM1` to the start of `ARM_LIB_STACK`.
* Targets can override `__mbed_user_setup_stackheap` if they want.
Currently only Renesas (ARMv7-A class) devices do.
* If microlib is in use, then it doesn't call `__user_setup_stackheap`.
Instead it just finds and uses `ARM_LIB_STACK` and `ARM_LIB_HEAP`
itself.
--legacyalign, --no_legacyalign are deprecated from ARMC6 compiler, in order to
remove deprecated flags all linker files (GCC and IAR as well to have uniformity)
should strictly align to 8-byte boundary
Replace looping construct with actual block writes.
Transaction in spi_master_block_write funtion is protected by critical
section to ensure it is completed without interruption. A hardware
limitation may cause data corruption if the TX fifo is allowed to run
empty.
Simplify tickers to stop emulating 1us ticks by using native timer resolutions.
Implement ticker get info functions.
Separate rtc and lp ticker init status by implementing separate functions.
Few targets need more than just pending IRQ set. They include some flags to be
set that are checked in IRQ handler. This is the case for targets in this
commit.
MAX32630FTHR gets BLE, uses timer peripheral 5 for HCI timing
libexactLE update for 610,620
Fixup hal_sleep and hal_deepsleep for 620
LEDn outputs now forced to open-drain
fire_interrupt function should be used for events in the past. As we have now
64bit timestamp, we can figure out what is in the past, and ask a target to invoke
an interrupt immediately. The previous attemps in the target HAL tickers were not ideal, as it can wrap around easily (16 or 32 bit counters). This new
functionality should solve this problem.
set_interrupt for tickers in HAL code should not handle anything but the next match interrupt. If it was in the past is handled by the upper layer.
It is possible that we are setting next event to the close future, so once it is set it is already in the past. Therefore we add a check after set interrupt to verify it is in future.
If it is not, we fire interrupt immediately. This results in
two events - first one immediate, correct one. The second one might be scheduled in far future (almost entire ticker range),
that should be discarded.
The specification for the fire_interrupts are:
- should set pending bit for the ticker interrupt (as soon as possible),
the event we are scheduling is already in the past, and we do not want to skip
any events
- no arguments are provided, neither return value, not needed
- ticker should be initialized prior calling this function (no need to check if it is already initialized)
All our targets provide this new functionality, removing old misleading if (timestamp is in the past) checks.
There is an easy default implementation of spi_master_block_write that
just calls spi_master_write in a loop, so the default implementation
of spi_master_block_write has been added to all targets.
Change the irq_handler parameter of NVIC_SetVector from a function
pointer to a uin32_t so it matches the cmsis specification. This
prevents the following problem from occurring in RTX5 when building
for IAR:
The error: Error[Pe167]: argument of type "void (*)(void)" is incompatible
with parameter of type "uint32_t".
Martin Kojtal
Harrison Mutai
Peter B
Jaeden Amero
talorion
Sebastian Stockhammer
Kevin Bracey
Maciej Bocianski
ale87jan
Deepika
Russ Butler
Przemyslaw Stekiel
Keyur Hariya
Jesse Marroquin
Cruz Monrreal
Martin Kojtal
Bartek Szatkowski
Jimmy Brisson
Vincent Coubard
Sam Grove
Christopher Haster
Martin Kojtal