Remove HAL_Init and related code from SystemInit and move it to
mbed_sdk_init. The function SystemInit is called early in the boot
sequence before RAM is initialized or the VTOR is setup, so it should
not be used to perform the HAL initialization.
This fixes crashes due the vector table being used before it has been
relocated.
For STM32 targets using a 32-bit timer for the microsecond ticker, the
driver did not properly handle timestamps that are in the past. It
would just blindly set the compare register to the requested timestamp,
resulting in the interrupt being serviced up to 4295 seconds late
(i.e. after the 32-bit timer counts all the way around to hit the
timestamp again).
This problem can easily be reproduced by creating a Timeout object
then calling the timeout's attach_us() member function to attach a
callback with a timeout of 0 us. The callback will not get called for
over 2147 seconds, and possibly up to 4295 seconds late if no other
microsecond ticker events are getting scheduled in the meantime.
Now, after the compare register has been set, the timestamp is checked
against the current time to see if the timestamp is in the past, and
if so, the compare event is manually set.
NOTE: By checking if the timestamp is in the past after configuring the
capture register, we ensure proper handling in the case where the timer
updates past the timestamp while setting the capture register.
If you are using Ethernet, and not SPI Arduino pins:
=> keep your board with the default configuration
If you are using SPI Arduino pins, and not Ethernet:
=> you should remove the JP6 bridge on the front side of the board
If you need SPI Arduino and Ethernet:
=> you have to patch the NUCLEO board on the back side: set solder bridge SB121 to off, and SB122 to on
=> D11 is no more connected to PA_7 but to PB_5
=> overwrite d11_configuration config value in json file
Revert HRM1017 file source deletion
Added in small comment next to additions
Added mapping to BTN-labelled switches
Added mapping to USER_BUTTON-labelled switches
Undo incorrect mapping to SWIO pin in NORDIC target
Anna Bridge
jeromecoutant
Russ Butler
Sam Grove
Bradley Scott
Bartek Szatkowski
Martin Kojtal
Kevin Gilbert
Mihail Stoyanov
Michel Jaouen
Mohammad Azim Khan
adustm