This automated test makes sure that the serial
syncrhonous API ensures a full transmission before
the function returns. The complete string sent by
printf shall be completely transferred before printf
returns and the sleep modes are called.
mbed Issue #1849
Added CAN API support for NUCLEO_L476RG target.
"stm32l476xx.h" file was changed to avoid compilation errors.
Change-Id: Ifadf7048f6c72c0311ec915e47ce2190460ede68
Added CAN API support for DISCO_L476VG target.
*stm32l476xx.h* file was changed to avoid compilation errors.
NOTE: MBED_29 or MBED_30 cannot be tested on this platform because CAN pins are
soldered to USB, GYRO and others.
Change-Id: I2e85bd36dc45872b1ab617f072de98164f2c96f8
We're ensuring target and host start-up sync here in 2 ways:
1) adding a delay on host side to make sure the serial
initialization can happen before sending a character is sent to target
2) in case of serial_nc_rx_auto.py test, we're sending a
first character S which will trigger the move from rx+tx
to NC+rx.
This should avoid any crossing case due to HSOT being faster than target or vice-versa
During initialization phase of the 2 NC serial tests,
there is a character being sent from host to target,
based on MBED_HOSTTEST_START. The problem is that
the target firmware then creates a "new" serial on the
same serial interface. the new or should, or at least may,
induce a reset of the IP, so that the character sent by host
would be lost. So we're moving the new earlier.
the real testing part happens later, to check the next
character is not received or sent.
- Resetting in LPCXpresso IDE did not reset the LCD controller which
sometimes could cause strange behaviour
- The ROM_LAT bit in the MATRIXARB register must be set in order to
prevent a HardFault when debugging
- The change of compiler in LPCXpresso IDE to ARM launchpad GCC5 was
causing build errors due to multiply defined timeval symbol.
- The exporters for LPCXpresso IDE did not set the FPU_PRESENT define
for assembler, only for c/c++. This caused very strange behaviour
in the RTOS code (e.g. timeouts no longer working, context switches
failing etc.)
We need to remove *can_api.c* file accordingly to new directory structure.
Without that we can't compile any CAN mBed test.
Change-Id: I3d4f798ad75ec1b4c4a1d7ed877e71b7db6bf60f
Added CAN API support for NUCLEO_F302R8 target.
*stm32f302x8.h* file was changed to avoid compilation errors.
Change-Id: Ia4ee8a90fe3f0ad6955dde21e78ea4a6c05e4fcd
Added CAN API support for NUCLEO_F303K8 target.
*stm32f303x8.h* file was changed to avoid compilation errors.
Change-Id: If093c84f19c5a5ef68938af4653a25271c1108ba
Added CAN API support for NUCLEO_F303RE target.
*stm32f303xe.h* file was changed to avoid compilation errors.
Change-Id: Ia6519c982261d43165dbce73cab7cfc0617474e2
Added CAN API support for NUCLEO_F334R8 target.
*stm32f334x8.h* file was changed to avoid compilation errors.
Change-Id: Ic7b3273ffe24940ecdc189d2566a6a7f66825ce6
Added CAN API support for NUCLEO_F042K6 target.
"stm32f042x6.h" file was changed to avoid compilation errors.
Change-Id: I9622a233775fc6834201a322740bf5026244d50e
Added CAN API support for NUCLEO_F072RB target.
*stm32f072xb.h* file was changed to avoid compilation errors.
Change-Id: I9da75fde29fd19f0326d554acc1dbb5386b08317
Added CAN API suport for NUCLEO_F091RC target.
*stm32f091xc.h* file was changed to avoid compilation errors.
Change-Id: I9207575a0e2ad0f8e3a4bb78eb23d1e7b4a94171
Erwan GOURIOU
Laurent Meunier
Brian Daniels
svastm
Sam Grove
Martin Kojtal
Russ Butler
Christopher Haster
Vincent Coubard
Bartosz Szczepanski
Steven Cooreman
Anders Lindvall
Mihail Stoyanov
Mihail Stoyanov
Mahadevan Mahesh