70fad08a4c
Update SPI API documentation for hardware driven SS. Modify all target spi_api.c implementations. spi_init ssel parameter was used incorrectly to determine master/slave mode rather than enable hardware driven SS (seems to be due to legacy copy paste). Remove duplicate copy paste code of initialization in spi_init that is done by constructor (SPI and SPISlave)
2015-04-10 00:38:27 -05:00
e74074eba8
[HAL][K20XX/KLXX] Fixed deepsleep power consumption when AnalogIn is used
...
The power consumption was reported by Paul Staron to be 100uA higher
when an AnalogIn was used previously.
Problem 1 is that 40uA was used by the async ADC clock, which is never
actually used, so it is disabled. Problem 2 is that setting it for high
speed mode increased it by another 60uA while in deepsleep. This
currently seems to me to be possibly a bug in the design, but the
workaround is checking if this is the case before going to deepsleep,
and if yes, disable it. Afterwards it is re-enabled.
2015-03-22 15:15:40 +01:00
453e81fd4c
Merge branch 'pinology' of https://github.com/PrzemekWirkus/mbed into PrzemekWirkus-pinology
...
Conflicts:
libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_DISCO_F401VC/cmsis_nvic.c
2015-01-27 14:15:48 +01:00
6fa4b469f4
Decorated all HALs with gpio_is_connected() function implementation
2014-12-19 13:37:16 +00:00
1eb8d7cab4
Added serial_get_src_clock() function into serial_api.c and fastirc_frequency() function into clk_freqs.h for better portability.
2014-12-19 10:55:37 +01:00
bb969921ec
Fixed baudrate calculation issue in serial_api.c, arduino compatible pins name and USB device for Freescale KL43Z Target
2014-12-18 22:37:11 +01:00
185ce5bfe4
Fixed LPUART and USB device initialization issue. Added _kill, _exit and _getpid functions required by gcc-arm-none-eabi-4.8 toolchain.
2014-10-17 22:20:12 +02:00
4151ca0e98
Added LPUART support and fixed a many errors in KL43Z target
2014-10-15 01:02:32 +02:00
1f9586daac
Added spi_api.c and gcc_arm_kl43z.tmpl files. Fixed some issues in KL43Z target
2014-10-13 00:49:48 +02:00
262f9cff89
Add HAL for Freescale KL43Z
2014-10-11 20:40:12 +02:00
1b833cbd67
Changed serial pin_mode with brackets and for all targets
2014-10-06 12:15:24 +02:00
86e71216fa
Allow Serial pin to be NC on Freescale/NXP devices
...
Nordic(?)/STM should also be done, but I don't know if they do their own
stuff.
Issue is that since the mbed-assert implementation, calling pin_mode
causes an assert when a pin is NC. Since defining a serial object with
only TX or RX is a valid use case, this should be handled.
pinmap_pinout does accept NC pins, so there no guards are needed (person
who adds asserts there may also fix it in all other code).
2014-10-04 22:47:25 +02:00
c8f896d708
update definitions for us_ticker_set_interrupt() across all platforms to use timestamp_t
2014-08-29 17:02:39 +01:00
a681b14416
Change "error.h" to "mbed_error.h" to avoid conflicts with 3rd party code
2014-08-15 16:19:18 +01:00
dc7155634a
Bugfix for KLxx/K20 pwm period
...
Period is MOD + 1, so needs to add/substract 1 in the correct places
2014-07-21 19:03:07 +02:00
699c1782d5
Increased KLxxZs interrupt handling speed
...
Instead of checking one bit at a time use a simple binary search
algorithm. Speed increase is roughly 250% (bit more for KL46).
2014-07-09 21:52:25 +02:00
09251dd3ba
Revert "error.h -> mbed_error.h"
2014-07-08 14:04:50 +02:00
f7f77392d9
error header file rename to mbed_error.h
2014-07-04 08:05:49 +02:00
324407b59a
assert rename to mbed_assert header file
2014-05-28 16:38:00 +02:00
be43ebc182
MBED_ASSERT - mbed assert implementation
2014-05-28 15:39:44 +02:00
f9091a237c
[Freescale targets] - spi, serial assers corrections
...
- reverted gpio change in TARGET_LPC11U6X
2014-05-28 08:23:28 +02:00
d843d56c08
[ALL TARGETS] error replaced by assert for preconditions
2014-05-20 14:20:37 +01:00
fb90157c9a
All targets except STM - asserts for checking presumptions (function parameters)
2014-05-16 15:45:12 +01:00
09fe00f041
gpio and pinmap - asserts for NC as parameters (not init), abort retarget
...
- retarget - abort - calls mbed_die
- asserts added to gpio mbed hal for all targets
2014-05-15 15:30:14 +01:00
4c61464ee7
all targets - gpio - NC guard
...
- gpio init enables to set pin to NC, thus the rest of gpio HAL should not do any action
if pin is set to NC.
2014-05-14 15:44:33 +01:00
ab2b426832
Merge branch 'master' of https://github.com/mbedmicro/mbed
2014-05-07 09:58:23 +02:00
0659ba42f6
Merge branch 'master' of https://github.com/Sissors/mbed into Sissors-master
2014-05-07 08:36:08 +01:00
04fa77f909
increase timeout for slow slaves that use clock extensive stretching
2014-05-06 09:13:58 +02:00
2ec18a06d8
Fixed Freescale byte reads (minus k64)
...
See:
https://mbed.org/questions/3181/Inconsistent-results-when-attempting-wri/
for the issue. Now every byte read is treated equal and ACKs/NACKs are
correctly generated
2014-04-30 10:46:23 +02:00
b64e32299f
add fflush to exit
...
enable DEVICE_STDIO_MESSAGES on k64f
remove all line endings from error messages throughout mbed sdk (all targets)
2014-04-09 16:24:13 -05:00
e20949093c
added '\n' to error("") calls for all freescale targets and common source
2014-04-09 01:14:41 -05:00
71b306a2d4
Improvements to Sam's platform_init.c commit
2014-03-25 11:43:54 +00:00
ecad62a205
Updates to build_api.py (platform_init.c remains platform_init.o in mbed.bld) and moved NMI_Handler from gpio_irq_api.c to platform_init.c for KL05Z, KL25Z and KL46Z target platforms to take advantage of this change.
2014-03-24 18:41:19 -05:00
c1d3cb5aa3
address concern from watarai-san about code size and performance by creating a set of common initialization functions
2014-03-04 14:09:41 +01:00
be8bca4aa0
proposed change of gpio_api
2014-03-04 11:27:30 +01:00
8431561fc7
Merge pull request #194 from Sissors/master
...
LPC1768 writeable fix + KL25Z/KL46Z RTC pin function
2014-03-03 11:05:07 +00:00
ace842b1f1
Fixed KL25Z/KL46Z RTC-IN pin function
...
It used to set it to alternate function 2, which is I2C, and still works
fine in all my tests. Not intended though, and might be giving others
issues. 1 is the RTC_CLKIN
2014-03-01 16:40:32 +01:00
97b1598698
TSI electrodes uses regular pinNames
2014-02-23 21:42:16 +01:00
f28afaedfc
PinNames addition, KL05Z uARM online toolchain
...
- FRDM - TSI elec symbols
- Nucleo - SERIAL_TX pinName to USBTX , same for RX
- KL05Z - uARM set as online toolchain
2014-02-23 11:19:30 +01:00
65f5457fff
Merge pull request #181 from Sissors/master
...
Enable sleep for KL05Z
2014-02-20 18:48:15 +00:00
26f4773c60
Enable sleep for KL05Z
2014-02-20 19:15:27 +01:00
48739cc5e4
add arduino I2C naming to PinNames.h
2014-02-19 15:02:03 -06:00
be8cccd16f
Tabs to spaces...
2014-02-18 14:16:46 -06:00
a09c1a724f
Added some PinNames for Arduino compatibility and cleaned up white spaces
2014-02-18 14:12:40 -06:00
1f50bfc7c5
Update peripheral pin mapping and pin names
2014-02-18 12:08:11 -06:00
8583716513
Merge pull request #174 from Sissors/master
...
Properly round non integer bus-frequencies in MHz
2014-02-18 17:48:06 +00:00
65d66455c0
Properly round non integer bus-frequencies in MHz
...
PIT prescaler now rounds to nearest instead of down. Since when FLL is
used (default on KL05Z, but also possible on others), the bus
frequencies is 23.986MHz, rounding down is bad.
2014-02-18 18:40:33 +01:00
fad5c27038
Add default interrupt handler for Freescale NMI_b pins.
2014-02-07 18:20:45 -06:00
7ef411e7fb
Clean up tabs to spaces
2014-02-07 18:13:02 -06:00
5237b766e6
Updated PinMap PinMap_PWM for KL05Z, KL25Z and KL46Z targets. Should support all MCU pins
2014-02-07 18:07:11 -06:00
sg-
Sissors
0xc0170
Przemek Wirkus
Martin Olejar
Rohit Grover
Martin Kojtal
mazgch
Bogdan Marinescu
Emilio Monti