Commit Graph

295 Commits (3a301cd5f37a336ce77c8da2eaa605fd409cfee5)

Author SHA1 Message Date
j3hill 2a72bb67a3 NRF5x: QSPI SFDP read implementation 2019-01-23 10:24:02 -06:00
j3hill e9f08cb4d4 NRF5x: min read/write implementation 2019-01-23 09:55:27 -06:00
David Saada 22309c93d0 FlashIAP BD: Assert if default constructor is used w/o config change 2019-01-23 16:30:36 +02:00
Cruz Monrreal 0c85d441d2
Merge pull request #9408 from evva-sfw/feature/SPIF_ULBPR
SPIF - Fix command to unlock Global Block-Protection register
2019-01-22 23:59:21 -06:00
Veijo Pesonen 832eed02ce ESP8266: calls MBED_ERROR if modem's watchdog reset gets triggered 2019-01-22 16:11:32 +02:00
Veijo Pesonen c4d96e6309 ESP8266: provides blocking/non-blocking connect
Implements NetworkInterface::set_blocking() and implements the
functionality to distinguish between the two in connect()
2019-01-21 16:22:53 +02:00
Veijo Pesonen 58c1a88348 ESP8266: turns connect fully to non-blocking mode
Blocking mode connect is not supported anymore when this patch is
applied
2019-01-21 16:22:53 +02:00
Veijo Pesonen c60c5244c1 ESP8266: makes connect() connection status aware 2019-01-21 14:43:35 +02:00
jeromecoutant f3ba34a344 DIRS and SEEK SD tests update for small RAM targets
Test buffer size can now be specified for each target
2019-01-18 09:23:40 +01:00
Cruz Monrreal 309d9be347
Merge pull request #9386 from jeromecoutant/PR_SDJSON
SD default configuration for ST boards is already defined in TARGET_STM
2019-01-17 21:54:18 -06:00
Cruz Monrreal 30e0d8f1f6
Merge pull request #9366 from VeijoPesonen/bugfix-esp8266_verify_rcvd_data_len
ESP8266: add an error check for data overflow from modem side
2019-01-17 21:52:11 -06:00
Philipp Steiner f0ec813d71 Update Comments 2019-01-17 11:13:16 -06:00
Philipp Steiner 167a3098c8 Add SPIF_ULBPR command also to QSPIFBlockDevice and SPIFReducedBlockDevice 2019-01-17 11:13:16 -06:00
Philipp Steiner 5f4ff5de8c Add SPIF_ULBPR command and replace wrong command to clear all write-protection bits in the Block-Protection register. 2019-01-17 11:13:16 -06:00
Martin Kojtal b59b93e828
Merge pull request #9331 from VeijoPesonen/bugfix-esp8266_udp_prevent_would_block
ESP8266: prevent WOULD BLOCK from TX if UDP
2019-01-17 12:41:42 +01:00
jeromecoutant b070fb47d7 COMPONENT_SD default configuration for ST boards is already defined in TARGET_STM 2019-01-15 17:08:54 +01:00
Martin Kojtal a180d69e60
Merge pull request #9356 from VeijoPesonen/bugfix-esp8266_disconnect_return_code
ESP8266 - fixes disconnect to check the state from modem
2019-01-15 10:38:40 +01:00
Martin Kojtal ebf3a192e1
Merge pull request #9329 from juhaylinen/sdblockdevice-doc
SDBlockDevice docs update
2019-01-14 10:40:35 +00:00
Veijo Pesonen 02cd9f1884 [ESP8266] adds an error check for data overflow from modem side 2019-01-14 12:22:41 +02:00
Veijo Pesonen e83b883e08 [ESP8266] fixes disconnect to check the state from modem
Additionally to internal bookkeeping lets check from the modem
that what is connection state in disconnect. There might be
inconsistencies.
2019-01-11 16:25:26 +02:00
Seppo Takalo 7db2292417 Flush ESP8266 serial input buffers after HW reset 2019-01-10 18:13:32 +02:00
Veijo Pesonen e9ceff2450 [ESP8266] fixes a debug print 2019-01-10 14:33:15 +02:00
Veijo Pesonen 9a3c9a30b3 [ESP8266] Drop signalling SIGIO artificially if UDP send fails
With TCP it's desirable that SIGIO wakes up the application to check
if there is buffer space space available on the mode. With UDP the
behavior is not acceptable as we don't know if the other endpoint is
there as connection establishment is missing. Hence buffers might
stay full forever.
2019-01-10 14:33:15 +02:00
Martin Kojtal e25611aad8
Merge pull request #9309 from VeijoPesonen/bugfix-esp8266_send_busy
ESP8266 - fix send buffer exhaustion handling
2019-01-10 12:24:09 +00:00
Mel W 66f5358c4b
some minor streamlining and editorial changes 2019-01-10 14:18:11 +02:00
Juha Ylinen a4a99d61d2 SDBlockDevice docs update 2019-01-10 13:44:10 +02:00
Martin Kojtal 47e477cc97
Merge pull request #9310 from juhaylinen/spifblockdevice-doc
SPIFBlockDevice docs update
2019-01-10 10:53:19 +00:00
Cruz Monrreal b9d5dceb72
Merge pull request #9284 from VeijoPesonen/bugfix-esp8266_socket_close
ESP8266: Fixes AT-layer socket_open-functions
2019-01-09 13:47:46 -06:00
Veijo Pesonen 7c112b2843 [ESP8266] socket_send() returns WOULD_BLOCK if server won't accept
Driver must return NSAPI_ERROR_WOULD_BLOCK if a server won't accept
data from the modem and the modem's buffers are full. In case that
socket is closed driver returns NSAPI_ERROR_CONNECTION_LOST.
2019-01-09 16:34:25 +02:00
Juha Ylinen 96877b80e6 SPIFBlockDevice docs update 2019-01-09 15:29:34 +02:00
Veijo Pesonen 4a9f86565a [ESP8266] Fixes AT-layer socket_open-functions
When a socket open fails it musn't be treated as fatal error. Returning
a device error which is then handled by an application is the correct
solution
2019-01-09 13:20:52 +02:00
Seppo Takalo 8bf3ce3d68 ESP8266: Set HW reset time to 2ms 2019-01-08 18:18:46 +02:00
Martin Kojtal a9ce91686c
Merge pull request #9264 from offirko/offir_qspif_reduce_trace_level
reduce info traces to debug level to prevent logs overflow
2019-01-08 12:38:51 +00:00
Martin Kojtal 1c3b6f4f94
Merge pull request #9268 from yossi2le/yossi_fix_flashiap_test
Calculate FlashIAPBlockDevice start address and size automatically for test only
2019-01-08 09:51:28 +00:00
Yossi Levy bdeb54592f This commit fixes an issue in which boards with FlashIAP block device enabled fails the FlashIAP block device tests exists under the component directory. That's because they have no start address and size configured in the mbed_lib.json file. In order to simplify the test for targets with no definitions in the mbed_lib.json, the test will calculate the start address as the first sector after the application ends and up to the max size available. 2019-01-07 15:20:58 +02:00
Martin Kojtal 0eabafa551
Merge pull request #9135 from yossi2le/yossi_get_type_for_bd
Get type for BlockDevice
2019-01-07 12:26:29 +00:00
offirko a270cffe39 reduce info traces to debug level to prevent logs overflow 2019-01-06 12:11:30 +02:00
Cruz Monrreal 54f759176b
Merge pull request #9210 from AnttiKauppila/mbed_h_fix
mbed.h includes removed
2019-01-04 10:27:30 -06:00
Martin Kojtal 26b8a96d44
Merge pull request #9173 from michalpasztamobica/esp8266_remove_stop_uart_hw_ctrl
Prevent ESP8266 stopping HW control on init
2019-01-04 08:42:51 +00:00
Antti Kauppila 2ff6cd3df3 Cleaned 802.15.4_RF to not have mbed.h includes 2018-12-28 15:19:03 +02:00
Antti Kauppila 02b0f79e15 mbed.h includes removed 2018-12-28 14:36:10 +02:00
Yossi Levy b17d13e75e Documnent changes and adding const to get_type method 2018-12-23 14:27:14 +02:00
Yossi Levy b8b7292d8e astyle fix 2018-12-23 11:03:45 +02:00
Yossi Levy 1d71fb1c9f Add get_type method to block devices. 2018-12-23 11:03:45 +02:00
Deepika 5f57b89c10 Resolved: [Error] main.cpp@115,34: [Pe266]: "size" is ambiguous
`size` is part of std library since c++17, and results in build
errors for IAR 8.x.
https://en.cppreference.com/w/cpp/iterator/size
2018-12-21 14:29:06 -06:00
Deepika a356db19aa Resolved warning: variable declared but never referenced 2018-12-21 13:34:00 -06:00
Deepika 7b5fe2d8ba Resolve string literal error
Space needed between 2 string literals
    [Error] fopen.cpp@204,97: [Pe2486]: user-defined literal operator not found
2018-12-21 13:28:23 -06:00
Martin Kojtal cc2e15c84e
Merge pull request #9158 from davidsaada/david_lto_dup_types
Fix LTO build failures due to duplicate local types
2018-12-20 16:30:16 +00:00
Michal Paszta 034c72e12c Prevent ESP8266 stopping HW control on init 2018-12-20 13:22:13 +01:00
Alastair D'Silva 2617c5d55b Don't use define checks on DEVICE_FOO macros (mbed code)
The DEVICE_FOO macros are always defined (either 0 or 1).

This patch replaces any instances of a define check on a DEVICE_FOO
macro with value test instead.

Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
2018-12-20 10:16:42 +11:00
David Saada ec0ebc2cec Fix LTO build failures due to duplicate local types 2018-12-19 15:52:43 +02:00
Cruz Monrreal II 9b9b81e9a4 Merge branch 'esp8266_link_type_fix' of ssh://github.com/c1728p9/mbed-os 2018-12-18 13:23:44 -06:00
Cruz Monrreal ce1929b5df
Merge pull request #9045 from fredlee12001/patch-1
Fix wrong PIN config for RTL8195AM platform
2018-12-18 10:32:59 -06:00
Russ Butler 6210805696 Fix ESP8266 "Link Type" errors after reset
As part of the ESP8266 connect sequence, ESP8266Interface::connect,
a software reset is performed. If the ESP8266 had been connected
previously then the ESP8266 will sometimes send a "WIFI DISCONNECT" OOB
message before performing the software reset. This causes the
ESP8266::_oob_connection_status to change its state (_conn_status) from
NSAPI_STATUS_DISCONNECTED to NSAPI_STATUS_CONNECTING. This causes
ESP8266Interface::_startup, called later in the boot seqeunce, to skip
ESP8266::startup. Without this call socket mux mode (CIPMUX=1) is never
enabled and all send commands using this format fail with a "Link Type"
error.

This patch fixes that problem by unconditionally calling
ESP8266::startup as part of the ESP8266 connect sequence.
2018-12-17 10:11:52 -06:00
Cruz Monrreal 64e7e468b2
Merge pull request #9089 from jeromecoutant/DEV_QSPI_TEST
STM32 QSPI update
2018-12-14 10:14:13 -06:00
Cruz Monrreal 5e42fc0e74
Merge pull request #9057 from offirko/offir_qspif_prefer_144_mode
Prefer QSPI Bus mode 1-4-4 as highest priority for QSPIFBlockDevice
2018-12-13 18:15:04 -06:00
jeromecoutant fc548cdc05 STM32 QSPIF: add DISCO_L496AG, DISCO_F746NG and DISCO_F769NI 2018-12-13 10:56:36 +01:00
offirko b79c64ec53 Favor QSPI Bus mode 1-4-4 over QPI
QPI may have slightly better performance, but it is not supported by all targets.
It requires register setup between each Read and Program/Erase commands,
which might damage the overall performance eventually.
2018-12-12 10:54:48 +02:00
Michal Paszta d6e385b330 ESP8266 send returns WOULD_BLOCK error when busy 2018-12-11 17:48:37 +01:00
Veijo Pesonen e4de165a32 [ESP8266] Fixes namespace collision 2018-12-11 09:49:23 +02:00
Veijo Pesonen 02aeab29d3 [ESP8266] powers down the modem on disconnect 2018-12-11 09:49:23 +02:00
Veijo Pesonen 8415e49835 Fixes connect, and network-status logic 2018-12-11 09:49:23 +02:00
Veijo Pesonen 12fa3e59bb Fixes AT command timeout values from reset&connect 2018-12-11 09:49:23 +02:00
Veijo Pesonen 9857ee1c17 [ESP8266] Adds support for controlling HW reset of the modem from the driver
While connecting will run HW reset for the modem if reset wire is attached to a know pin.
2018-12-11 09:49:23 +02:00
Fred.Li fb1e4de3ba
Fix wrong PIN config for RTL8195AM platform
Merge from https://github.com/ARMmbed/sd-driver/pull/110
2018-12-11 14:37:09 +08:00
Cruz Monrreal 61ade84447
Merge pull request #8875 from deepikabhavnani/fix_components
Add dependency checks to components
2018-12-10 19:20:30 -06:00
Martin Kojtal 8301325481
Merge pull request #8935 from kfnta/crypto_partition_fix
Fix PSA crypto partition and tests
2018-12-06 11:34:45 +01:00
Martin Kojtal be817bab44
Merge pull request #8853 from VeijoPesonen/feature-esp8266_reconnect2
Reports NSAPI_STATUS_CONNECTING when trying to reconnect
2018-12-05 10:37:17 +01:00
Cruz Monrreal b03a8a37bb
Merge pull request #8947 from SeppoTakalo/patch-1
ONME-4007: Fix mbed_lib link from ESP8266 Readme.md
2018-12-04 12:23:16 -06:00
Cruz Monrreal 0b1b8e0cc3
Merge pull request #8908 from kfnta/alzix_fix_its
Fix PSA internal storage configuration
2018-12-04 11:51:04 -06:00
Oren Cohen fa5c96c857 Fix includes 2018-12-04 18:37:47 +02:00
Oren Cohen c3bd6f12d2 Fix PSA crypto partiotion and tests
* Styling
* Correct error codes on failing connection
* Add panics where needed
* correct skip defines
* Fix psa_spm_init_refence_counter bug
2018-12-04 17:07:28 +02:00
Martin Kojtal 6edc81ddae
Merge pull request #8873 from kfnta/psa_spm_docs
PSA-SPM documentation follow-up
2018-12-04 15:38:45 +01:00
Martin Kojtal e02a8ab2f1
Merge pull request #8925 from Patater/crypto-storage-config-fixes
Fix PSA storage typo
2018-12-04 14:34:15 +01:00
Alexander Zilberkant 44ec2aa49a Better PID handling
PSA PID is of int32_t type - use native type during the whole flow for better readability.
Convert PID to unsigned for calculations only.
Add dedicated inline function for logic shift right.
2018-12-04 14:08:14 +02:00
Alexander Zilberkant 9f7752b1f9 Replace PID and UID order in file name
PID should come first to create - to prevent timing attacks. Each partition can only request its own files. Thus starting lookup from the PID makes more sence.
2018-12-04 14:08:14 +02:00
Alexander Zilberkant e7df8583d6 Optimize error handling 2018-12-04 14:08:14 +02:00
Alexander Zilberkant 9d59ed8c60 Fix PSA internal storage misconfiguration
Use internal TDBStore instance instead of default one
2018-12-04 14:08:14 +02:00
Martin Kojtal 6ae3501a66 spm spe: remove space 2018-12-04 11:50:14 +00:00
Mel W 56e3dd9a7f
Grammatical and capitalization changes 2018-12-04 13:03:21 +02:00
Seppo Takalo c384119576 ONME-4007: Fix mbed_lib link from ESP8266 Readme.md
ONME-4007: Fix mbed_lib link from ESP8266 Readme.md
2018-12-04 10:27:17 +02:00
Martin Kojtal b52c164028
Merge pull request #8911 from c1728p9/esp8266_flow_control_fix
Fix ESP8266 recv_udp timeout with flow control
2018-12-03 13:41:23 +01:00
Martin Kojtal 0d0740f17e
Merge pull request #8890 from michalpasztamobica/esp8266_disconnect_no_connection
ESP8266 disconnect returns ERROR_NO_CONNECTION
2018-12-03 13:40:54 +01:00
Martin Kojtal bf36ff77c1
Merge pull request #8855 from michalpasztamobica/warnings_fix
Fix compilation warnings (apart from nanostack)
2018-12-03 13:31:55 +01:00
Martin Kojtal c62f654da1
Merge pull request #8843 from miyuki/fix-cxx11
Fix C++11 build with Arm Compiler 6
2018-12-03 13:22:11 +01:00
Martin Kojtal acbde4e0b6
Merge pull request #8841 from VeijoPesonen/bugfix-restrict_send_size2
Bugfix restrict send size; namespace fixes; ATCmdParser::read return value fix
2018-12-03 13:21:34 +01:00
Deepika 76220fa89c Add Serial + EventQueue dependency to ESP8266 2018-11-30 15:38:28 -06:00
Jaeden Amero 6de7c184d7 psa: storage: Fix PSA_PS_ERROR_OFFSET typo
Correct typo of PSA_PS_ERROR_OFFSET to PSA_ITS_ERROR_OFFSET.
2018-11-30 15:36:22 +00:00
Russ Butler 53ed3f5c3d Fix ESP8266 recv_udp timeout with flow control
UDP packets are always received as OOB data. Without checking for
new OOB data with a call to "_process_oob" then recv_udp never blocks.
If a UDP packet is not available then NSAPI_ERROR_WOULD_BLOCK is
returned. This causes mbed-os's DNS handling to always fail when
flow control is enabled.

This patch fixes recv_udp by always calling "_process_oob" regardless
of if flow control is enabled. This ensures that recv_udp follows the
timeout parameter and waits for new data to arrive.
2018-11-29 19:13:37 -06:00
Oren Cohen 549d24f213 More fixes by Melinda 2018-11-28 14:52:40 +02:00
Oren Cohen 01301387f8 Run SPM code generator 2018-11-28 14:40:01 +02:00
Oren Cohen 45bd4f305a Add SPM code generation test to Travis-CI 2018-11-28 14:38:44 +02:00
Michal Paszta eb9c688574 ESP8266 disconnect returns ERROR_NO_CONNECTION 2018-11-28 11:23:09 +01:00
Oren Cohen 6ec5144e0c Melinda's remarks 2018-11-28 12:17:37 +02:00
Oren Cohen 3629e002ee Fix PSA-SPM Documentation 2018-11-28 12:17:36 +02:00
Martin Kojtal e62abd8aee
Merge pull request #8804 from mohammad1603/inject_entropy_spm
PSA Crypto SPM
2018-11-28 09:40:31 +01:00
Deepika b32c6ba2a5 Components if using RTOS modules should be enabled only when RTOS is present
Build failures were observed when rtos is ignored with .mbedignored.
Components dependent on RTOS should be guarded with MBED_CONF_RTOS_PRESENT
2018-11-27 13:55:59 -06:00
Deepika 6c6ef87c19 Fix header files used in esp8266
"ns_types.h" results in build failure when networking feature is ignored with
.mbedignored. ESP8266 component should be enabled only when NSAPI is present.
2018-11-27 13:55:59 -06:00
Deepika 74ad47b269 Fix header files used in 802.15.4_RF
"ns_types.h" is not used, but included. Results in build failure when networking
feature is ignored with .mbedignored

"mbed_trace.h" not used.
2018-11-27 13:55:59 -06:00
Martin Kojtal e69aa15aea
Merge pull request #8744 from kfnta/psa_spm_base
PSA Secure partition manager and services
2018-11-27 15:26:38 +01:00