The input format is now determined by the OUTPUT_EXT key in
targets.json, and defaults to "bin" when not specified. This changes the
Teensy3_1 and the NRF51x targets' post bulid hooks.
Teensy3_1 just converted to intelhex, so we do nothing instead.
NRF51x assumed that it was taking in a bin format file. I made it detect
file type by extension.
The current implementation of semihost_disabledebug() hangs when used
with mbed interface firwmare revision 21164, the first version which
added support for this semihost call. I encountered this hang when
running a Release build on my mbed-LPC1768 board as the RTOS attempted
to disable the debugger before the idle thread put the CPU to sleep.
The 21164 interface firmware expects that R1 points to a valid argument
block but the current implementation passes in NULL. The fix was to
pass in a dummy block which is ignored by the newer 141212 revision of
the firmware and allows the 21164 version to proceeed without halting
the CPU until a manual reset.
Before this fix semihost_disabledebug() did work with the latest
mbed interface firmware revision 141212 but I rarely use this revision
of the interface firmware due to the instability issues I have
encountered in the past with its CDC and LocalFileSystem functionality.
With this proposed fix, the code now works with both the 21164 and
141212 revisions of the mbed interface firmware on the mbed-LPC1768.
The extra space between "--no_wrap_diagnostics" and "-e" is inconsistent with the development and release targets.
It bugs people (like me) that have little OCD tics 😉.
targets.json contained a key for some targets, `OUTPUT_EXT`, which I
moved to `Target`, the root of all targets. Following on that, the tools
now use this extension provided by `OUTPUT_EXT` to determine the file
type of the output executable.
From opt.h:
IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
filter on recv operations.
The IP_SOF_BROADCAST_RECV option does not enable or disable recieving
broadcast packets, it only enables a software filter.
Due to limitation in the mbed website backend (board names need to be <= 19 characters), we are shortening the CLI target names from THUNDERBOARD to TB.
@screamerbg
This removes the duplicate header files from the build. We were getting
lucky on most invocations of `mbed compile` in that these headers were
searched for after some others, but not when exporting to uvision.
If I2C slave support is included, then the I2C error handler would
always reset the I2C address, resulting in incorrectly changing the
I2C state to listen for a controller configured as I2C master. This
change conditionalizes the address setting to only occur if the
controller was in slave mode when the error occurred.
Check in scripts which are able to generate flash algos for supported
targets.
To initially download all packs the following command should be run:
"python extract.py --rebuild_all"
After that all supported targets can be rebuilt by running:
"python extract.py"
Finally, to rebuild an individual target you can used its pack name:
"python extract.py --target STM32F302R8"
Jimmy Brisson
Adam Green
Willie Walker
bcostm
Seppe Stas
cyliangtw
Sam Grove
Martin Kojtal
Tony Wu
Christopher Haster
Steven Cooreman
Mahadevan Mahesh
Michel Jaouen
Kari Severinkangas
0xc0170
Brian Daniels
Anna Bridge
Bradley Scott
jeromecoutant
Russ Butler