Increase coverage of the SPI master FPGA test:
- check supported frequencies (based on the device capabilities),
- add support for manual CS handling and test cases,
- add test cases for rx/tx buffers with different length (based on the device capabilities),
- add test case for one symbol transmission,
- add test cases for different symbol sizes (based on the device capabilities).
Tests sequence swaped:
ASYNCHRONOUS_DNS_TIMEOUTS
ASYNCHRONOUS_DNS_INVALID_HOST
This is temporary solution to prevent Jenkins fail until root cause will be fixed.
Enabled heap_and_stack test for baremetal.
Added a test to check that global variables are initialised.
In mbed_sdk_boot:
- Added initialisation for mbed_stack_isr_start/size and mbed_heap_start/size for all toolchains.
- ARM toolchain:
- Added call to mbed_toolchain_init() to initialise global variables.
- Moved microlib initialisation code from mbed_retarget.cpp to mbed_sdk_boot.c.
- IAR toolchain: there is no equivalent to a software init hook that can be called. __low_level_init() was used but since this function is called before RAM initialisation, it cannot be used to initialize global variables. Defined a new __mbed_init() function called from IAR startup file instead.
On some targets with very fast counters used for us ticker (e.g. 26 MHz) tested interrupt delays provided in the ticker_timeout array may be too short (execution of the set_interrupt() function takes longer than the tested delay).
We will skip tested ticker delay if the delay is less than assumed max set_interrupt() function execution time (20 us).
Also, the test array will be extended.
Original default constructor implementation wasn't quite working
properly; it didn't cope with the new "mode_limit" parameter.
Change mechanism so that this now works:
MbedCRC<POLY32_BIT_ANSI_CRC, 32, CrcMode::TABLE> crc;
CRC tests failed to exercise handling of the initial and final-xor
values with respect to reflection parameters. Add tests covering this.
Expected behaviour is that the initial value is always non-reflected and
the final-xor happens after the optional output reflection.
Replace the thread used in the test case teardown with a Ticker to allow
testing with the bare metal profile. This Ticker is used to prevent the
watchdog from resetting the device during the final greentea
communication.
Martin Kojtal
Kevin Bracey
Tymoteusz Bloch
jeromecoutant
Przemyslaw Stekiel
Michal Paszta
Anna Bridge
Evelyne Donnaes
Rajkumar Kanagaraj
Ari Parkkila
Filip Jagodzinski
Hugues Kamba
cyliangtw