Targets NUCLEO_F429ZI and UBLOX_EVK_ODIN_W2 have 192K RAM.
Heap size in PR #3871 was increased from 48K to 96K as tls-client
example failed with 48K heap. But this resulted in compilation failures
in mbed-client that requires 71K for global/static data.
Hence this PR reduces heap to 64K that minimum required by tls-client
to work. This also meets mbed-client data segment requirements.
Check in flash algos for the K64F, KL46Z, F429, F439 and Odin board
and enable these features accordingly in targets.json. This
implementation uses flash algo blob that are generated via scripts.
The K64F and KL46Z were generated directly from packs, while the
KL46Z, F429, F439 and odin were generated from code checked into
the FlashAlgo repo.
The address of the vector table is hardcoded to the start of flash in
many, if not all, ST targets. This causes a crash in applications that
are using a bootloader. This patch updates the boards STM32F429xI,
STM32F439xI and Odin so they properly handle updating the VTOR with
a bootloader.
The pwmout driver is very similar for each STM32 family.
The only family specific part is defined in pwmout_device.h file.
It mainly contains few specific information:
- The mapping of PWM/TIMERS to APB1 or APB2 so that we can get the clock
- The clock calculation uses the right APB clock, which was sometimes
not the case before and could have lead to errors in case dividers were
enabled on APB clock settings. This case is now covered.
- Inactivation of inverted support on feaw families
this first makes pinmap.c a common file
then rework it with several goals:
- avoid gpio / irq / pin management extra dependencies
- improve performances when switching between pin modes
This change is based on LL layer to access to registers level
instead of using HAL higher level API.
The family specific functions are implemented in pin_device.h
of each family. Mostly this is F1 family that is differnt
from other ones.
Add MBED_APP_START and MBED_APP_SIZE to the Odin's linker script
so the start and size of an image can be specified. This allows the
ROM to be split into a bootloader region and an application region.
Add MBED_APP_START and MBED_APP_SIZE to the stm32f429's linker script
so the start and size of an image can be specified. This allows the
ROM to be split into a bootloader region and an application region.
With the RTOS, the STACK_SIZE specified here is unrelated to the stack
size available for the main thread (that runs pre_main). Save memory by
reducing the stack size to a more reasonable amount.
On uVisor, HEAP_SIZE is both a minimum available and maximum available
heap size. The heap can't grow beyond the end of the heap into the
neighboring stack. On all uVisor-supported platforms, guarantee at least
0x6000 bytes of heap space. This increases the portability of uVisor
applications as the memory available for legacy heap allocations is
guaranteed. This helps to avoid out of memory errors on platforms that
were previously guaranteeing less memory.
Indrek Ardel
Anna Bridge
Sam Grove
jeromecoutant
Rob Meades
0xc0170
Mohammad Azim Khan
Michel Jaouen
Martin Kojtal
bcostm
adustm
Laurent MEUNIER
Christopher Haster
Russ Butler
Russ Butler
Jaeden Amero